Double tap to zoom

 

Features

Conveyor:
Main conveyor 36” x 80’ with extendable conveyor 36” x 74’
for up to 150’ overall stockpiling length, 70” deep main
conveyor frame, 54” deep extendable conveyor frame

Idlers:
CEMA B – 5” diameter, 3 roll, 35 degree troughing idlers on 4’
spacing with close-spaced 20 degree idlers at feed point, 8’
spacing on flat steel return idlers

Belt:
2 ply 220 PIW, 3/16” x 1/16” covers with mechanical
fasteners

Power:
850 TPH maximum capacity (100 pcf material). Class I
Dodge shaft mount gear reducers with backstops, 3/60/230-
460 TEFC electric motors, V-belts, motor mounts and guards

Main Conveyor                                          Extendable Conveyor
30 Hp                                                         30 Hp
425 FPM                                                    625 FPM
TA-5 reducer                                             TA-4 reducer
16” dia., 3/8” grooved head                   16” dia., 3/8” grooved head
14” dia. steel wing tail                            14” dia. steel wing tail
Screw take-up                                          Screw take-up

Under Carriage:
Heavy Duty V-type with hydraulic powered twin cylinder raise
and cylinder covers. Axle – gullwing axle assembly. Includes:
walking beam travel axle with eight (8) 11-22.5 tires, four (4)
385/65D-19.5 radial travel tires, less cylinders. A stiff arm
shall be provided in place of the fold down cylinders. King pin,
air brakes, travel, brake and directional lights, mudflaps,
power travel (2) hydraulic planetary power travel drives, cam
arm-style rear undercarriage to maintain constant wheel
radius when raising and lowering conveyor

Receiving Trough and Radial Hopper:
Rock box style hopper – 5’ 6” long with adjustable rubber
flashing

Anchor Pivot:
Anchor plate (for radial travel)

Belt Cleaners (Optional):
Martin belt cleaner on head pulley of each conveyor

Extendable Travel:
Hydraulic powered winch with ¾” wire rope cable

Hydraulics:
10 Hp electric/hydraulic power pack to operate undercarriage
lift, power travel drives, and extendable conveyor. Includes all
hydraulic tubing, hoses, gauges, filter and control valves

Paint:
One primer coat, finish coat of Beige acrylic

Wizard Touch Automation:
Wizard Touch Automation is an automated stockpiling control
system with an easy-to-use touch screen interface that allows
the user to take advantage of pre-programmed stockpiling
capabilities. Includes capabilities for building desegregated
inline, desegregated radial, and full radial piles within a user
specified area

Electrical:
NEMA 4 enclosure with main disconnect mounted on the rear
undercarriage member; all starters and wiring to motors;
start/stop pushbuttons for main conveyor motor, extendable
conveyor motor, hydraulic power pack motor; cord holders
and supports for power cable; LESS power cable – 460 volt,
3 phase, 60 hertz power required

Options:
Impact Idlers (3)
Rubber disc return idlers
CEMA C idlers
Self training idlers
3 ply, 330 PIW belting
Vulcanized belt splice
Wizard Touch Automated Control System
Remote Control – wireless operates within 1,000’
Hydraulic fold-down cylinders for Gullwing axle
Manual landing jacks
Material flow switch
1,000 TPH Upgrade

Physical / Operating Characteristics:
Overall Length: fully extended ............................ 150’ [45.7m]
Travel Length; kingpin to tail .............................. 82’-2”[25.0m]
Travel Width ........................................................ 11’-5”[3.5m]
Travel Height: .................................................... 13’-10”[4.2m]
Feed Height: ........................................................ 9’-10”[3.0m]
Minimum Discharge Height: .................................. 20’5”[6.2m]
Maximum Discharge Height: ............................ 54’-10”[16.7m]
Kingpin Travel Weight: ........................................... 26,000 lbs
Axle Travel Weight: ................................................ 40,000 lbs

Stockpile Capacities (in tons/yd3):
                                              Fully Desegregated              Full Pile
Conical Pile                        4,569/3,384                            13,452/9,964
1° Pile Segment                190/141                                   511/380
90° Pile                               21,669/16,056                        59,442/44,164
180° Pile                            38,769/28,728                        105,432/78,364

Specifications

Model

Size
(in x ft / mm x cm)

Conveyor Length
Retracted (ft / cm)

Conveyor Length
Extended (ft / cm)

Motor (HP)
Main Conveyor / Extended Conveyor

Capacity
(TPH / MTPH)

33-36150

36 x 150 / 914 x 4572

80 / 2438

150 / 4572

30 / 30

850 / 771

0.99% Financing for 48 Months

Check out our financing special offering 0.99% for 48 months!