Double tap to zoom

 

Features

MAIN TANK & COLLECTING FLUME
– Main tank - 1/4” (sides, ends, overflow launder & feed  box) and 3/8”
(bottom plate) welded plate steel construction
– Integral feed box with 1/4” AR curved liner and nominal 2’ x 6’ feed opening
– 56’ of adjustable weir boards
– Integral overflow launder with 14” dia. discharge
– Ladder rungs located near the feed end of the tank for internal tank access
– Self-support tank design with external stiffeners only - no internal stiffeners
– Three-cell collecting flume - 3/16” welded plate construction (unlined)
– Center discharge box - 3/16” and 1/4” welded plate construction (unlined)

WALKWAY & MECHANISM SUPPORT
– 24” wide diamond deck walkway across the feed end and down the center of the tank
– 1-1/2” O.D. posts, top and intermediate handrails
– 4” toeboards
– Removable/hinged door sections at each station
– Walkway support structure also houses and supports the electric/hydraulic
operating mechanism

VALVES, VALVE SEATS, DOWNPIPES & DISCHARGE ELBOWS
– Self-aligning urethane dart valves
– “Snap-in” urethane valve seats
– 6” schedule 40 UV rated PVC downpipes
– Urethane discharge elbows with rectangular discharge

OPERATING MECHANISM
– 3 HP electric/hydraulic power pack with nominal 3 micron filtration
– 750-psi (adjustable to 1,000-psi) hydraulic system
– 10-gal. hydraulic reservoir
– Accumulator
– Nine (9) settling stations each including:
* One (1) 24-volt DC adjustable height sensing paddle assembly
* Three (3) discharge valves with adjustable down rods operated by hydraulic cylinders
* Hydraulic manifold block with cartridge valves and 24-volt DC coils
* Individual ball and check valves
* Stainless steel hydraulic plumbing with o-ring face seal fittings
– All stations prewired to a bridge mounted NEMA 4 junction box which also houses
the PLC (programmable logic controller)
– All wiring in the form of “plug and receptacle” type cords
– Controller: Standard Dell PC HMI (human-machineinterface) including CPU,
monitor, keyboard, optical mouse and WindowsTM based programming. An
optional industrial PC HMI with touch screen housed in a NEMA 4 enclosure
is available for outdoor installations

PHYSICAL/OPERATING CHARACTERISTICS
– Feed Material Size - minus 3/8”
– Capacity - TPH dependent on water requirements for proper feed material dilution
and desired material retention
– Water Requirements - up to 3,500 gpm
– Operational Dim. (when installed on standard stationary structure) - 35’10” L x 12’3” W x 30’3” H
– Loads (when installed on standard stationary structure)
Approx. Dead Load = 42,300 lbs.
Approx. Live Load = 148,000 lbs.
Approx. Tank Volume = 8,258 gallons

Specifications

Model

Tank Width
(ft / m)

Tank Length
(ft / m)

Overflow Capacity
(GPM at #100 Mesh)

Overflow Capacity
(GPM at #150 Mesh)

Overflow Capacity
(GPM at #200 Mesh)

7008-32

8 / 2.4

32 / 9.8

3500

1800

950

0.99% Financing for 48 Months

Check out our financing special offering 0.99% for 48 months!