Fields with asterisks* are required. Your friend will receive an email that contains a reference to this page. Please send this email only to people you know who would be interested in this information.
MAIN TANK & COLLECTING FLUME – Main tank - 5/16” (sides, ends, overflow launder & feed box) and 3/8” (bottom plate) welded plate steel construction – Integral feed box with 1/4” AR curved liner and nominal 2’ x 6’ feed opening – 80’ of adjustable weir boards – Integral overflow launder with 24” dia. discharge – Ladder rungs located near the feed end of the tank for internal tank access – Self-support tank design with external stiffeners only - no internal stiffeners – Three-cell collecting flume - 1/4” welded plate construction (unlined) – Center discharge box - 1/4” welded plate construction (unlined)
WALKWAY & MECHANISM SUPPORT – 24” wide diamond deck walkway across the feed end and down the center of the tank – 1-1/2” O.D. posts, top and intermediate handrails – 4” toeboards – Removable/hinged door sections at each station – Walkway support structure also houses and supports the electric/hydraulic operating mechanism
OPERATING MECHANISM – 3 HP electric/hydraulic power pack with nominal 3 micron filtration – 750-psi (adjustable to 1,000-psi) hydraulic system – 10-gal. hydraulic reservoir – Accumulator – Eleven (11) settling stations each including: * One (1) 24-volt DC adjustable height sensing paddle assembly * Three (3) discharge valves with adjustable down rods operated by hydraulic cylinders * Hydraulic manifold block with cartridge valves and 24-volt DC coils * Individual ball and check valves * Stainless steel hydraulic plumbing with o-ring face seal fittings – All stations prewired to a bridge mounted NEMA 4 junction box which also houses the PLC (programmable logic controller) – All wiring in the form of “plug and receptacle” type cords – Controller: Standard Dell PC HMI (human-machineinterface) including CPU, monitor, keyboard, optical mouse and WindowsTM based programming. An optional industrial PC HMI with touch screen housed in a NEMA 4 enclosure is available for outdoor installations
PHYSICAL/OPERATING CHARACTERISTICS – Feed Material Size - minus 3/8” – Capacity - TPH dependent on water requirements for proper feed material dilution and desired material retention – Water Requirements - up to 8,100 gpm – Operational Dim. (when installed on standard stationary structure) - 53’2” L x 18’11” W x 34’ H – Loads (when installed on standard stationary structure) Approx. Dead Load = 74,500 lbs. Approx. Live Load = 278,000 lbs. Approx. Tank Volume = 15,648 gallons
Tank Width (ft / m)
Tank Length (ft / m)
Overflow Capacity (GPM at #100 Mesh)
Overflow Capacity (GPM at #150 Mesh)
Overflow Capacity (GPM at #200 Mesh)
12 / 3.6
48 / 14.6
0.99% Financing for 48 Months
Check out our financing special offering 0.99% for 48 months!