Double tap to zoom

 

Features

PRIMARY SCREEN
Model #1892P & #1892S:
− KPI-JCI 3-deck, single shaft, 10° wet vibrating screens ranging from
5’ x 14’ to 6’ x 20’ units on portable plants and up to 8’ x 20’ screens on
the skid mounted or stationary plants.
Model #1892PH & #1892SH:
− KPI-JCI 3-deck, triple shaft, horizontal wet vibrating screens ranging
from 6’ x 16’ to 6’ x 20’ units on portable plants and up to 8’ x 20’ units
on skid mounted or stationary plants.
− All screens include complete drive assemblies, coil spring suspension
and are available set-up for wire cloth or urethane screen media.
− Consult your authorized dealer or the factory for additional details.

CYLONES
− Available cyclones include dewatering cyclones ranging from 6" to 32" dia.
and classifying cyclonesranging from 1.6" to 32" dia..
− Consult your authorized dealer or the factory for additional details.

DEWATERING SCREEN
− Available dewatering screens include units ranging from 2’ x 7’ up to 8’ x 16’.
Note – not all sizes available on portable plants.
− Screens feature molded rubber buffers, adjustable incline, adjustable stroke,
curved sieve like feed section, dual Vimarc vibrating motors and many other
features.
− Consult your authorized dealer or the factory for additional details.

SLURRY PUMPS
− Linatex rubber lined horizontal centrifugal slurry pumps ranging in size
from 1-1/2" x 1-1/2" to 10" x 10".
− Complete drive assembly including 1800 RPM, TEFC, 3/60/230-460 motor,
v-belts, sheaves, bushings and guards as required.
− Consult your authorized dealer or the factory for additional details.

CHASSIS or STRUCTURE
− Portable plants include heavy duty I-beam construction, fifth wheel king pin,
air brakes, travel lights, mudflaps and cribbing locations.
− Skid mounted and stationary plants are broken down for shipment and match
marked for ease of identification and assembly in the field.
− All plants include complete fresh & waste water systems including control valves,
spray bars and manifolds as required.
− All chutes, sumps, flumes, feed boxes, etc. are fabricated of 3/16" A36 plate steel
and are available with many liner options.
− The primary screen overs chutes allow for the positioning of three (3) radial
stackers maximizing stockpiling capacity.
− Access platforms with ladder or stair access from grade are available for both
sides of either screen, across the feed end of the primary screen and across
the discharge end of the dewatering screen.
− Slurry sumps include all necessary level controls, drains and emergency overflow ports.
− Consult your authorized dealer or the factory for additional details.

PHYSICAL/OPERATING CHARACTERISTICS
− Feed Material Size – typically 6" minus
− Capacity – will vary dependent upon components.  Components are typically sized to
match the desired application parameters. Consult the factory for specific details.
− Water Requirements – will vary dependent on the application parameters. Consult
the factory for specific details.

Specifications

Model

Screen Size
(ft x ft / m x m)

Fine Material Washer Size
(in x ft / mm x m)

Blademill Size
(in x ft / mm x m)

Water Requirements
(USGPM)

1892

Varies

N/A

N/A

Varies

0.99% Financing for 48 Months

Check out our financing special offering 0.99% for 48 months!