Double tap to zoom

 

Features

For a complete custom engineered fines recovery or specialty sand production plant, KPI-JCI offers dewatering screens, classifying cyclones, dewatering cyclones, pumps, attrition cells, density classifiers & sieve bend screens.  Building on KPI-JCI’s tradition of being a single source supplier, the addition of these products to the traditional washing & classifying product line gives KPI-JCI the ability to provide the equipment necessary to meet virtually any processing goals.

Specifications

DEWATERING CYCLONES
Model #DWC 6/6, 6/10, 10/10 & 16/10
– Heavy duty, fibre reinforced plastic (FRP) casing
– Concave, convex 360° spiral inlet head liner
– Inlet pressure diaphragm and gauge
– Snap fit, replaceable elastomer (i.e. – rubber) liners
– Stainless steel quick release clamp fasteners
– Replaceable urethane vortex finder
– Replaceable rubber apex/spigot
– Flexible rubber “fishtail” dewatering discharge boot and siphon control valve
– Extended steel overflow pipe
Model #DWC 20/10, 26/13 & 32/13
– Heavy duty fabricated steel or cast iron casing
– Concave, convex 360° spiral inlet head liner
– Inlet pressure diaphragm and gauge
– Replaceable elastomer (i.e. – rubber) liners
– Bolt together cone sections
– Replaceable rubber lined vortex finder
– Replaceable rubber apex/spigot
– Flexible rubber “fishtail” dewatering discharge boot and siphon control valve

DEWATERING SCREENS:
- Predominately bolted screen frame assembly
- Integral stiffener tubes with lifting lugs
- Steel coil springs
- Adjustable incline (0° to 5°)
- Sloped feed section
- Adjustable discharge dam
- Bolt-in UHMW pan side liners
- Highly abrasion resistant 1’ square x 30 mm thick modular urethane screen media with slotted apertures
- Stress relieved, fabricated motor bridge
- Engineered motor mounting studs
- Dual 3/60/230-460 vibrating motors
- Adjustable stroke
- Horizontal main frame
- Paint – std. KPI beige
– Extended steel overflow pipe

CLASSIFYING CYCLONES
Model #CC 1.6/6 & 4/6
– Solid polyurethane cyclones
– Replaceable urethane vortex finder
– Replaceable urethane apex/spigot
– Victaulic feed and overflow connections
Model #CC 6/6, 6/10, 10/10 & 16/10
– Heavy duty, fibre reinforced plastic (FRP) casing
– Concave, convex 360° spiral inlet head liner
– Snap fit, replaceable elastomer (i.e. – rubber) liners
– Stainless steel quick release clamp fasteners
– Replaceable urethane vortex finder
– Replaceable rubber apex/spigot
Model #CC 20/10, 26/13 & 32/13
– Heavy duty fabricated steel or cast iron casing
– Concave, convex 360° spiral inlet head liner
– Replaceable elastomer (i.e. – rubber) liners
– Bolt together cone sections
– Replaceable rubber lined vortex finder
– Replaceable rubber apex/spigot

SLURRY PUMPS:
- Warman horizontal centrifugal slurry pumps
- Large diameter shaft with short overhang minimizes deflection and contributes to long bearing life.
- Easily replaceable rubber liners are bolted, not glued, to the casing for positive attachment and
  ease of maintenance.
- Casing halves of cast or ductile iron with external reinforcing ribs provide high operating pressure
  capabilities and an extra measure of safety.
- Molded rubber impeller with front and rear shrouds have pump out vanes that reduce recirculation and
  seal contamination.
- A very robust one-piece frame cradles the cartridge type bearing and shaft assembly. An external impeller
  adjustment mechanism is provided below the bearing housing for easy adjustment of impeller clearance.
- Complete drive assembly including 1800 RPM, TEFC, 3/60/230-460 motor, overhead motor mount, v-belts,
  sheaves, bushings and v-belt guard.

0.99% Financing for 48 Months

Check out our financing special offering 0.99% for 48 months!