Generac Magnum MLT 5060KV

Double tap to zoom

 

Features

The 6kW MLT5060KV is powered with a reliable Tier 4 Kubota engine. The 79" wide wheel-base design and robust construction make off-road transport an easy ride.

Specifications

ENGINE
• Kubota® D1005-E3BG1-MGM-1 - liquid cooled, diesel engine
o Standby - 13.1 hp @ 1800 rpm
o Prime - 11.7 hp @ 1800 rpm
o 3 cylinder
o 1.0 L displacement
• Fuel consumption (prime) – 0.50 gph (1.89 lph)
• 60 Hz engine/generator
• Industrial engine exhaust system
• Rubber vibration dampers isolate engine/generator from frame
• Cooling system capable of operating at 120°F ambient
• Full flow oil filter, spin on type
• Fuel filter with replaceable element
• Dry type cartridge air filter
• Polyethylene fuel tank with large diameter opening
o 56 gal. capacity
o 112 hr. run capacity
o 3 ½” fill port
 
ENGINE CONTROLS
• Engraved, aluminum punched and anodized control panel
• Four position keyed switch – glow plugs (preheat, off, run, start)
• Hour meter
• Automatic low oil/high temperature shutdown system
 
GENERATOR
• Marathon Electric®
o Brushless
• 6 kW standby output
• 120/240 VAC – 50/25A
• +/-6% capacitor voltage regulation
 
ELECTRICAL SYSTEM AND CONTROLS
• Individual floodlight circuits with 15A breakers
• Ballast indicator lights
• Four cylindrical ballasts
• Individually canned transformers for proper heat dissipation
• 30A start limit breaker (assures no load condition exists before starting)
• Standard individually breakered convenience outlets:
o (1) 120 VAC 20 Amp GFCI duplex outlets (Nema 5-20R type)
o (1) 240 VAC 30 Amp twistlock outlets (Nema L6-30R type)
• 440 CCA wet cell battery
 
FLOODLIGHTS
• Four light fixtures – 1000 watts each - metal halide, quick disconnect
• Oval aluminum reflector
• Tempered glass lens
• Silicone gaskets for moisture and dust protection
• Individual floodlight On/Off switches
• Internal cabinet light storage
 
WIRING
• All wiring is sized to the amperage draw required
• AC & DC wiring diagrams are provided
 
MAST
• Light Tracking System - distinctive angle fixture design for common light distribution
• Mast stowed height: 9.25 ft.
• 25ft. maximum extension, 5-section, tubular steel
• Urethane guides on all sides of mast tubes
• Industrial black powder coat finish
• 950lb. automatic self-braking electric winch – easily raises mast vertically
• 360° ground level rotation with locking system
• Coiled mast cord
• Equipped with single lifting eye and fork pockets
 
ENCLOSURE
• Steel enclosure – 14-gauge
o UV& fade resistant, high temperature cured, white polyester powder paint
o 68 dB(A) at 23 feet – prime power
• Stainless steel hinges on doors
• Multi-lingual operating/safety decals
• License plate holder with light
• Manual holder with operating manual
 
TRAILER
• Front step platform for easy adjustment of light fixtures
• Mast support - 3” square tube, ¼” wall
• Removable tongue - 48” long
• Tubular steel frame - 3/16” wall
• Four, 2000 lb. adjustable leveling jacks – 4 point stance
• All jacks transport and lock in horizontal position for storage
• Side outriggers - 12’ 7” span
• Safety chains with spring loaded safety hooks
• Combo hitch – 2” ball hitch and 2 ½” pintle ring
• Single wall polyethylene fenders
• DOT approved tail, side, brake, and directional lights
o Recessed rear lights
• 3500 lb. leaf spring axle
• ST205/75R15 – 6 ply
• 68.5 in. axle span
 
WEIGHTS & DIMENSIONS
• Dry weight: TBA lbs (TBA kg)
• Operating weight: TBA lbs (TBA kg)
• Mast stowed: 120 x 79 x 111 in (3.05 x 2.01 x 2.82 m)

0.99% Financing for 48 Months

Check out our financing special offering 0.99% for 48 months!