Double tap to zoom

 

Features

Size: 6” (152 mm) Victaulic Suction x 4”(102 mm)
Petroleum Discharge Flange.
Casing: (06C1) Aluminum 356‐T6;
(06C3) Ductile Iron 60‐40‐18.
Maximum Operating Pressure 200 psi (1379 kPa).*
Enclosed Type, Six Vane Impeller: Aluminum 356‐T6.
11/16” (17,4 mm) Diameter Spherical Solids.
Impeller/Pinion Shaft: Alloy Steel 8620.
Replaceable Wear Rings: (2) Gray Iron 30.
Suction Head: (06C1) Aluminum 356‐T6;
(06C3) Ductile Iron 80‐55‐06.
Gearbox Housing: Gray Iron 30.
Gear Lubrication: SAE 90 Gear Oil.
Gears: Alloy Steel 8620 and Carbon Steel 12L14.
Gear Ratio: 2.56:1 Increase.
Bearings: Open Single Row Ball, Roller and Tapered Roller.
Gaskets: Buna‐N, Resistant Synthetic Rubber and Cork.
Hardware: Standard Plated Steel.
Standard Equipment: Mounting Cross Member and Trunnion
Assembly. Air Shift. 1800 Series Dana Flanges.
Optional Equipment: Bronze Impeller. Bronze Wear Rings.
Auxiliary P.T.O. Stub Shaft. Speedometer Adaptor.
Victaulic is a Registered Trademark of Victaulic Company of America.
Dana is a Registered Trademark of Dana Corporation.
*Consult Factory for Applications Exceeding
Maximum Pressure and/or Temperature Indicated

Specifications

Suction 6" (152 mm)
Discharge 4" (102 mm)
Solids Handling 0.69" (18 mm)
Material Ductile Iron
Impeller Material Aluminum
Seal Material Carbon/Ni-Resist
Flange ASA
Drive Type PTO

0.99% Financing for 48 Months

Check out our financing special offering 0.99% for 48 months!