Gorman-Rupp T3A60S-E15 3P

Double tap to zoom

 

Features

Size: 3” x 3” (76 mm x 76 mm) NPT ‐ Female.
Casing: Gray Iron 30. Maximum Operating Pressure 57 psi (393 kPa).*
Semi‐Open Type, Two Vane Impeller: Ductile Iron 65‐45‐12.
Handles 2 1/2” (63,5 mm) Diameter Spherical Solids.
Flap Valve: Neoprene w/Nylon and Steel Reinforcing.
Removable Adjustable Cover Plate: Gray Iron 30; 35 lbs. (16 kg).
Replaceable Wear Plate: Carbon Steel 1015.
Seal Plate: Gray Iron 30.
Retainer Flange: Gray Iron 30.
Impeller Shaft: Alloy Steel 4150.
Shaft Sleeve: Alloy Steel 4130.
Lip Seals: Buna‐N.
Radial Bearing: Permanently Lubricated Single Row Ball.
Flanges: Gray Iron No. 30.
Gaskets: Buna‐N w/Compressed Synthetic Fibers, PTFE, Cork and Rubber.
O‐Rings: Buna‐N.
Hardware: Standard Plated Steel.
Brass Pressure Relief Valve.
Seal Cavity Oil Level Sight Gauge.
Steel Motor Support Feet.
Optional Equipment: Strainer. 3” ASA or 80 mm DIN 2527 (PN 16) Gray Iron 30 Suction and Discharge Spool Flanges. Self‐Cleaning Wear Plate. Consult Factory for Additional Options.
MOTOR SPECIFICATIONS
Type: TEFC.
Horsepower: 15.
RPM: 1750.
Voltage: Three Phase ‐ 208‐230V/460V; 60 Hz; Frame 254TC; 1.15 S.F.; 38.14‐35.5/17.3 Approx. Full Load Amps; 256‐232/116 Locked Rotor Amps.
Standard Specifications Shown. Alternate Motors Available ‐ Consult Factory.

Specifications

Suction 3" (76 mm)
Discharge 3" (76 mm)
Solids Handling 2.5" (64 mm)
Solids Handling Cast Iron
Impeller Material Ductile Iron
Seal Material Silicon Carbide
Flange ASA
Drive Type Electric Motor

0.99% Financing for 48 Months

Check out our financing special offering 0.99% for 48 months!