Gorman-Rupp T4A60S-E20 3P

Double tap to zoom

 

Features

Size: 4” x 4” (101 mm x 101 mm) NPT ‐ Female.
Casing: Gray Iron 30. Maximum Operating Pressure 66 psi (455 kPa).*
Semi‐Open Type, Two Vane Impeller: Ductile Iron 65‐45‐12. Handles 3” (76,2 mm) Diameter Spherical Solids.
Flap Valve: Neoprene w/Nylon and Steel Reinforcing.
Removable Adjustable Cover Plate: Gray Iron 30; 41 lbs. (18 kg).
Replaceable Wear Plate: Carbon Steel 1015.
Seal Plate: Gray Iron 30.
Retainer Flange: Gray Iron 30.
Impeller Shaft: Alloy Steel 4150.
Shaft Sleeve: Alloy Steel 4130.
Lip Seals: Buna‐N.
Radial Bearing: Permanently Lubricated Single Row Ball.
Flanges: 125# Gray Iron 30.
Gaskets: Buna‐N w/Compressed Synthetic Fibers, PTFE, Cork and Rubber.
O‐Rings: Buna‐N.
Hardware: Standard Plated Steel.
Brass Pressure Relief Valve.
Seal Cavity Oil Level Sight Gauge.
Steel Motor Support Feet.
Optional Equipment: Strainer. 4” ASA or 100 mm DIN 2527 (PN 16) Gray Iron 30 Suction and Discharge Spool Flanges. Self‐Cleaning Wear Plate. Consult Factory for Additional Options.
MOTOR SPECIFICATIONS
Type: TEFC.
Horsepower: 20.
RPM: 1750.
Voltage: Three Phase ‐ 208‐230V/460V; 60 Hz; Frame 256T; 1.25 S.F.; 53.3‐48.2/24.1 Approx. Full Load Amps, 313/157 Locked Rotor Amps.
Standard Specifications Shown. Alternate Motors Available ‐ Consult Factory.

Specifications

Suction 4" (102 mm)
Discharge 4" (102 mm)
Solids Handling 3" (76 mm)
Solids Handling Cast Iron
Impeller Material Ductile Iron
Seal Material Silicon Carbide
Flange ASA
Drive Type Electric Motor

0.99% Financing for 48 Months

Check out our financing special offering 0.99% for 48 months!