Kobelco SK350DLC

Double tap to zoom

 

Features

SK350DLC Scrap Handling Machine
  • Two-pin Grapple (Bucket) for Neater Working -  Fixed with two pins, the grapple has four tilting teeth. With none of the shaking of the one-pin type, there’ s minimum spillage, and the load is swiftly and efficiently placed as desired. Also, dumping does not require so much boom raising, and so cycle times are reduced.
  • Unique Angled Shape of 8.2m Boom Makes Dumping Easier -  KOBELCO-designed “bend boom” covers an extensive working range. When dumping loads, it more easily negotiates the sides of a trailer flat bed or the hatch coaming of cargo shipping, for greater speed and efficiency

Parallel-link-type Elevating

High cab elevation gives eye point height of over 5 m for excellent view of operations, to boost safety and efficiency. Smooth and speedy cab elevation takes about 20 secs, with little shaking due to the high-precision parallel link motion design and rugged bracket construction. Helps reduce operator fatigue.


Eco Mode

Now there’ s a choice of three operating modes. Besides S mode, which strikes a balance between fuel costs and work volumes, and H mode, which prioritizes work volumes, the new ECO mode makes fuel economy the priority. With a new multi-display monitor, ECO mode operation can be checked at a glance.


KOMEXS Remote Monitoring

With the advanced remote monitoring system, machine operational status data and maintenance data can now be managed from a remote laptop, and security is also enhanced. The system shows data on fuel consumption and CO2 emissions.


Specifications

Model Name SK350DLC
Machine Type SK350DLC-9
Operating Weight 100,500 {45,600}
Swing speed 6.6 rpm {6.6 min>sup>-1}
Travel speed LOW (1st) speed 2.0mph {3.2 km/h} / HIGH (2nd) speed speed 3.4 mph {5.4 km/h}
Gradeability 70% {32°}
Engine Model HINO J08E-UV
Rated power output 270 HP {201 kW} / 2,100 rpm
Fuel tan 153.2 gal
Hydraulic oil tank Hydraulic system 109.1 (Inside tank 64.7)
Cab Dimension Elevating method Hydraulic Link type elevator
Elevation stroke 8'7" ft-in {2,610 mm}
Eye point height 17'11" ft-in {5,450 mm}
Overall length 40'3" ft-in {12,260 mm}
Overall width 10'6" ft-in {3,190 mm}
Overall height (to top of cab) 10'11" ft-in {3,330 mm}
Tail swing radius 12'0" ft-in {3,670 mm}

0.99% Financing for 48 Months

Check out our financing special offering 0.99% for 48 months!