2017 FABTEC V400RD VSI Crusher - Impact For Sale

  • Price
  • $395,000 USD
  • Description
  • IMPACTOR PLANT
  • Hours
  • 195.3
  • Inventory ID
  • E00050884
  • Serial
  • PC-V400-169-17
(800) 437-2924
Machine Location:
View Google Map
General Equipment & Supplies, Inc.
3500 Apple Creek Road
Bismarck, North Dakota 58504

Details

  • Inventory ID: E00050884
  • Status: On Yard
  • Make: FABTEC
  • Model: V400RD VSI
  • Year: 2017
  • Serial#: PC-V400-169-17

Equipment Text

  • PORTABLE FABTEC/SUPERIOR V400 VSI WITH 42" UNDER VSI REAR DISCHARGE
  • CONVEYOR EQUIPPED AS DESCRIBED BELOW:
  • - SUPERIOR V400 VALOR VSI WITH ROTOR AND ANVIL RING CONFIGURATION
  • - PINION GEAR DRIVE
  • - INTERCHANGEABLE CHAMBER FOR APPLICATION CHANGE
  • - HYDRAULIC LID LIFTING AND SWING CAPABILITY
  • - ANIT-VIBRATION MOUNTS FOR INCREASED MACHING PERFORMANCE
  • AND LIFESPAN
  • - DEEP HIGH CAPACITY NO HARDFACE REVERSIBLE THREE PORT ROTOR
  • DESIGN FOR INCREASED PRODUCTION
  • - MONITORSVIBRATION OIL TEMPERATURE AND OIL FLOW
  • - ASTRALLOY MAIN SHAFT IS THREE TIMES STRONGER THAN 4340
  • - DIRECT CRUSHING CHAMBER ACCESS FOR EASIER/SAFER MAINTENANCE
  • - STANDARD SAFETY SHUTDOWN CIRCUITS PROVIDED
  • - CONTROL CABINET WITH TACH/HOUR METER OIL PUMP OIL HEATER AND
  • 15 HP CONV. CONTACTORS AND WARNING STROBE
  • - ROLLED AR STEEL ONE PIECE TUB LINER CAST DRIVE TUNNEL LINERS
  • - ELECTRIC HEATER WITH INTERNAL THERMOSTAT CONTROL
  • - SYMMETRY ROTOR: SUPERIOR WILL ALSO SUPPLY (1) SYMMETRY ROTOR
  • AND SYMMETRY ANVIL RING - NOT INCLUDED IN PRICE OF THIS MACHINE
  • - 400 HP @1200 RPM VSI MOTOR DRIVE AND ENCLOSED DRIVE GUARD.
  • - HEAVY DUTY VSI MOUNT AND AR LINED UNDER VSI DISCHARGE HOPPER
  • WITH 1/2"X6" ADJUSTABLE WIPERS.
  • - ACCESS DOOR FOR UNDER VSI INSPECTION.
  • - WALKWAYS AROUND VSI WITH DIAMOND PLATE FLOOR AND 5" TOE
  • BOARDS 42" TUBESTEEL HANDRAILS AND ACCESS LADDER.
  • - 42" UNDER VSI CONVEYOR DISCHARGING OVER REAR OF CARRIER WITH FULL
  • LENGTH SKIRTBOARD WIPER AND COVER FOR DUST CONTROL:
  • - VULCANIZED LAGGED HEAD PULLEY SELF CLEANING WING TAIL PULLEY.
  • - 3 PLY BELT 1/4" COVER; OPTIONAL VULCANIZED SPLICE ~VS~ CLIPS.
  • - DODGE SCM BEARINGS.
  • - 15 HP TEFC 5207 FALK REDUCER.
  • - CLOSE SETTING ON CEMA C IDLERS UNDER VSI THEN 36" SPACING.
  • - PROVISION FOR WATER JETS FOR DUST CONTROL AT UNDER-VSI HOPPER DISCHARGE END.
  • - TANDEM AXLE CARRIER 21" WF 68# BEAMS:
  • - 9700 HUTCH SUSPENSION.
  • - 22 500# AXLES AND 11:00RX22.5 TIRES.
  • - AIR BRAKES BRAKE LIGHTS MARKER LIGHTS REFLECTIVE TAPE AND MUD FLAPS.
  • - FOUR GROUND SUPPORT STANDS WITH FRONT FOLDING LEGS.
  • - SAFETY GUARDS SANDBLASTED CHASSIS RUST INHIBITOR PRIMER AND TWO FINISH
  • COATS.
  • - GUARDS MAY NOT MEET ALLLOCAL CODES; CUSTOMER IS RESPONSIBLE TO
  • HAVE GUARDING INSPECTED AND CUSTOMER HOLDS RESPONSIBILITY TO
  • COMPLY.
  • INCLUDED OPTIONS:
  • - 4 LEG PLANT MOUNTED FAB TEC HYDRAULIC STABILIZING SYSTEM:
  • 12 VOLT HYDRAULIC PACKAGE WITH SAFETY LOK CIRCUIT.
  • 70 000 LB CAPACITY HYDRAULIC LEGS WITH HEAVY DUTY FOOT PADS.
  • - TOOL BOX MOUNTED ON CARRIER:
  • - VULCANIZED SPLICE ~VS~ STANDARD CLIPS.
  • - MOTOR SHEAVE.
  • ELECTRICAL SWITCHGEAR FOR A CANICA 300 HP VSI EQUIPPED AS PER BELOW:
  • - 60 X60 HOFFMAN NEMA 4 RATED ENCLOSURE WITH 800 AMP LOCKABLE
  • OPERATOR
  • - 400 HP ALTIVAR OR ABB VFD WITH LINE REACTOR
  • - MOUNTED WITH SUPERIOR SUPPLIED AUX ELECTRICAL CONTROL PANEL
  • WITH RPM GUAGE VIBRATION DETECTOR (WARNING LIGHT) HOUR METER
  • OPEN LID SAFETY CUT OFF 2 HP LUBE STARTER OIL SYSTEM HEATER
  • STARTER AND 15 HP SPARE STARTER (UNDER CRUSHER) WITH TERMINATION
  • POINTS FOR ALL SAFETY SHUTOFF SWITCHES
  • - (1) SIZE #2 FOR INTERLOCKED FEED CONVEYOR AND (1) SPARE 20 HP BOTH
  • WITH 60 AMP RECEPTACLES
  • - LEG KIT SAFETY START UP HORN
  • - BUTTONS IN DOOR E-STOP AMP METER HZ METER VOLT METER SPEED POT
  • - 900 CFM AIR TO AIR EXCHANGER WITH WEATHER COVER
  • - 5 KVA TRANSFORMER WITH 120V 20A SERVICE OUTLET
  • - SG SETS OF PLANT 30- FOR OPERATION
  • - 100- OF POWER CORD

Make An Offer

INTERESTED IN THIS MACHINE? SEND US A MESSAGE.

Fields with asterisks* are required.

Send to a Friend

Fields with asterisks* are required.