2018 Superior 7203-38 Screening Plant For Sale

2018 Superior 7203-38 Screening Plant For Sale
  • Price
  • $292,500 USD
  • Description
  • SUPERIOR SCREEN PLANT
  • Hours
  • 1.2
  • Inventory ID
  • E00052111
  • Serial
  • 1197132
(800) 437-2924
Machine Location:
View Google Map
General Equipment & Supplies, Inc.
3500 Apple Creek Road
Bismarck, North Dakota 58504

Details

  • Inventory ID: E00052111
  • Status: On Yard
  • Make: Superior
  • Model: 7203-38
  • Year: 2018
  • Serial#: 1197132

Equipment Text

  • SUPERIOR 7X20 3D SCREEN PLANT EQUIPPED AS DESCRIBED BELOW:
  • CARRIER CHASSIS:
  • - MAIN FRAME CONSTRUCTED OF WIDE FLANGE STRUCTURAL STEEL BEAMS
  • - TANDEM AXLE WITH (8) 11X22.5 RADIAL TIRES
  • - COMPLETE AIR BRAKE SYSTEM
  • - MUDFLAPS ONREAR AXLE
  • - TRAVEL LIGHTS WITH BRAKE AND DIRECTIONAL SIGNALS
  • - FIFTH WHEEL HITCH
  • - (4) FIXED STRUCTURAL STEEL CRIBBING LEGS
  • - GREASE PACKAGE - CONSISTING OF 1-2 LOCATIONS TO GREASE ENTIRE PLANT
  • SUPERIOR GUARDIAN 7203 HORIZONTAL VIBRATINGSCREEN:
  • - SUPPLY AND INSTALLATION FOR A 7X20 3-DECK ALL PERTINENT ITEMS AND COMPONENTS
  • INCLUDING:
  • - ADJUSTABLE MOTOR BASE MOTOR SHEAVE SCREEN SHEAVE V-BELTS DRIVE GUARD
  • - SCREEN AND ALL PERTINENT ITEMS AND COMPONENTS ARE SUPPLIED BY SUPERIOR
  • - PRICE INCLUDES THE FOLLOWING ITEMS:
  • - 50 HP TEFC 1200 RPM 480 VOLT 3 PHASE 60 HZ SCREEN DRIVE MOTOR
  • - SCREEN SUBFRAME
  • - SCREEN MOTOR MUST BE REMOVED FOR TRANSPORT STORAGE LOCATION ON PLANT
  • - SCREEN IS INSTALLED TO OPERATE INTHE HORIZONTAL POSITION
  • - RIGHT HAND DRIVE
  • - END TENSION ON BOTTOM DECK
  • - MOTOR TO BE REMOVED FOR TRAVEL
  • ROLL AWAY SCREEN DISCHARGE CHUTES AND BLENDING GATES:
  • - ROLLERS MOUNTED UNDER CHUTE SUPPORT STRUCTURE
  • - CONSTRUCTED OF 1/4" MILD STEEL WITH 1/4" AR400 LINER
  • - DESIGNED TO MOVE DISCHARGE CHUTES AWAY FROM THE SCREEN
  • - ALLOWS FOR ACCESS TO THE FRONT OF SCREEN FOR MAINTENANCE
  • - (4) FLOP GATES IN EACH CHUTE; EACH GATE MANUALLY OPERATED BY A LEVER OUTSIDE
  • THEIR RESPECTIVECHUTE
  • - CONSTRUCTED OF 1/4" MILD STEEL WITH 1/4" AR LINERS
  • - TOP DECK CHUTE DISCHARGES OVER THE KINGPIN END OF THE CHASSIS OR ONTO
  • MIDDLE DECK
  • CROSS CONVEYOR 25% BLENDING GATES:
  • - MIDDLE DECK CHUTE DISCHARGES ONTO MIDDLE OR BOTTOM DECKCROSS CONVEYOR
  • 25% BLENDING GATES
  • - BOTTOM DECK CHUTES DISCHARGES ONTO BOTTOM OR "BLENDS UP" TO MIDDLE DECK
  • CROSS CONVEYOR 25% BLENDING GATES
  • - AR LINERS ON BOTH SIDES OF BLENDING GATES
  • FINES HOPPER:
  • - 1/4" AR PLATE STEEL SIDES
  • - ADJUSTABLE RUBBER FLASHING FULL LENGTH
  • 2) 30" WIDE X 12- LONG REVERSING CROSS CONVEYORS:
  • - STRUCTURAL STEEL CHANNEL MAIN FRAME
  • - MOUNTED ON ROLLERS TO MANUALLY MOVE TO DISCHARGE FROM EITHER SIDE OF CHASSIS
  • - RECEIVE OVERSIZE MATERIAL FROM RESPECTIVE MIDDLE AND BOTTOM DECKS
  • - CLASS II HEAD END DRIVE
  • - 7.5 HP MOTOR V-BELT DRIVE WITH DRIVE GUARD
  • - DODGE SHAFT MOUNT REDUCER
  • - HEAD PULLEY - 10" DIAMETER DRUM CROWN FACE 3/8" DIAMOND LAGGING
  • - TAIL PULLEY - 10" DIAMETER WING PULLEY
  • - SHAFTS - TURNED AND POLISHED
  • - DODGE BEARINGS
  • - MANUAL SCREW TAKE-UPS
  • - CARRY IDLERS - C5 20 DEGREES TROUGH CHANNEL MOUNT SPACED 26" OC
  • - BELTING - 3 PLY 3/16" X 1/16" PIW
  • - BELT SPLICE: VULCANIZED
  • 60" X 29- FINES CONVEYOR:
  • - STRUCTURAL STEEL CHANNEL MAIN FRAME
  • - CLASS II HEAD END DRIVE
  • - 15 HP MOTOR V-BELT DRIVE
  • - DODGE SHAFT MOUNT REDUCER
  • - HEAD PULLEY - 12" DIAMETER DRUM CROWN FACE 3/8" HERRINGBONE LAGGING
  • - TAIL PULLEY - 12" DIAMETER CHEVRON® WING PULLEY
  • - SHAFTS - TURNED AND POLISHED
  • - DODGE BEARINGS
  • - MANUAL SCREW TAKE-UPS
  • - CARRY IDLERS - C5 20 DEGREES PICKING CHANNEL MOUNT SPACED APPROXIMATELY 27"
  • OC
  • - RETURN IDLERS - C5 FLAT ROLLS SPACED 10- OC
  • - BELTING - 3 PLY 3/16" X 1/16" 330 PIW
  • - BELT SPLICE VULCANIZED
  • WALKWAY:
  • - 3/16" DIAMOND TREAD PLATE ALONG BOTH SIDES AND FEED END OF SCREEN
  • - 3/16" DIAMOND TREAD PLATE ALONG DISCHARGE CHUTE FOR EASIER ACCESS TO THE
  • BLENDING GATES AND DISCHARGE CHUTE:
  • - INCLUDESTOE BOARD AND TWO-RAIL HANDRAIL
  • - WALKWAY ACCESS ON BOTH SIDES OF THE CHASSIS WITH (1) ACCESS LADDER
  • HYDRAULIC "RUN-ON" LEVELING JACKS:
  • - (4) 6" X 18" HYDRAULIC CYLINDERS
  • - COUNTERBALANCE VALVES BUILT INTO HEAD OF CYLINDER NO PINNING REQUIRED
  • - (4) MANUAL LEVER VALVES; (1) FOR EACH CYLINDER
  • - 9HP HONDA GASOLINE OVER HYDRAULIC PUMP UNIT
  • TOOLBOX:
  • - CONSTRUCTED OF ALUMINUM AND MOUNTED ON CHASSIS
  • - TWO LATCHES ON HINGED COVER
  • - 18" X 18" X 36" LONG
  • CRIBBING STORAGE - MUSTHAVE HORIZONTAL FINES CONVEYOR
  • - STORAGE COMPARTMENT FOR CRIBBING MATERIALS DRIVE GUARD SCREEN CLOTH ETC
  • VOLTAGE:
  • - REQUIRED POWER IS 480 V/ 3 PH / 60 HZ
  • GUARDING:
  • - PRICE INCLUDES STANDARD GUARDING
  • - CUSTOMER IS RESPONSIBLE TO HAVE GUARDING CHECK BY LOCAL INSPECTORS
  • - PAINT: GRAPHITE GRAY
  • - (1) COAT PRIMER; (1) FINISH COAT ENAMEL
  • OWNER-S MANUAL:
  • - (1) COPY INCLUDED FOR OPERATION AND MAINTENANCE
  • INCLUDED OPTIONS:
  • EXTENDED FRONT WALKWAY:
  • - 3/16" DIAMOND TREAD PLATE ALONG DISCHARGE CHUTE FOR EASIER ACCESS TO THE
  • BLENDING GATES AND DISCHARGE CHUTE
  • - INCLUDES TOE BOARD AND TWO-RAIL HANDRAIL
  • - WALKWAY ACCESS ON BOTH SIDES OF THE CHASSIS
  • AES ELECTRICAL SWITCHGEAR FOR 7203 SCREENING PLANT:
  • - 50 HP SCREEN
  • - 15 HP UNDERSCREEN CONVEYOR
  • - 7.5 HP CROSS 1
  • - 7.5 HP CROSS 2
  • - 5 HP SIRC TO 20 AMP RECEPTACLE
  • - (2) 20 HP SPARE SIZE #2 TO 60 AMP RECEPTACLES
  • - (1) 60 AMP FEED BREAKER TO 60 AMP RECEPTACLE
  • - (1) 100 AMP FEED BREAKER TO 100 AMP RECEPTACLE
  • - BUTTONS ON DOOR PANEL STAND TRANSPORTS ON PLANT ON GROUND FOR OPERATION
  • - HOUR METER E-STOP SAFETY START HORN (MANUAL)
  • - 100FT POWER CORD

Make An Offer

INTERESTED IN THIS MACHINE? SEND US A MESSAGE.

Fields with asterisks* are required.

Send to a Friend

Fields with asterisks* are required.

0.99% Financing for 48 Months

Check out our financing special offering 0.99% for 48 months!