2017 Superior 6203-32OF Screening Plant For Sale

2017 Superior 6203-32OF Screening Plant For Sale
  • Price
  • $324,500 USD
  • Description
  • SCREEN PLANT W/ OVERHEAD FEED CONVEYOR
  • Inventory ID
  • E00050503
  • Serial
  • 1078601
(800) 437-2924
Machine Location:
View Google Map
General Equipment & Supplies, Inc.
4300 Main Ave
Fargo, North Dakota 58103

Details

  • Inventory ID: E00050503
  • Status: On Yard
  • Make: Superior
  • Model: 6203-32OF
  • Year: 2017
  • Serial#: 1078601

Equipment Text

  • SUPERIOR 6203-32OF OVERHEAD FEED SCREEN PLANT EQUIPPED AS PER BELOW:
  • CARRIER CHASSIS:
  • - MAIN FRAME CONSTRUCTED OF WIDE FLANGE STRUCTURAL STEEL BEAMS
  • - TANDEM AXLE WITH (8) 11X22.5 RADIAL TIRES
  • - COMPLETE AIR BRAKE SYSTEM
  • - MUDFLAPS ON REARAXLE
  • - TRAVEL LIGHTS WITH BRAKE AND DIRECTIONAL SIGNALS
  • - FIFTH WHEEL HITCH
  • - 1-2 GREASE POINTS FOR GREASING THE PLANT
  • - (8) FIXED STRUCTURAL CRIBBING LEGS
  • SUPERIOR 6203-32 HORIZONTAL (FLAT) SCREEN:
  • - RIGHT HAND DRIVE COIL SPRINGS BASEFRAME 5- PANELS END TENSION
  • BOTTOM DECK
  • - 40 HP TEFC 1200 RPM 480 VOLT 3 PHASE 60 HZ SCREEN DRIVE MOTOR
  • - ADJUSTABLE MOTOR MOUNT MOTOR AND SCREEN DRIVE SHEAVE V-BELT
  • DRIVE AND DRIVE GUARD
  • SCREEN DISCHARGE CHUTES:
  • - CHUTES ARE IN FIXED POSITION
  • - CONSTRUCTED OF 1/4" MILD STEEL WITH 1/4" AR400 STEEL LINER
  • - TOP DECK CHUTE DISCHARGES ONTO TOP OR MIDDLE DECK CROSS CONVEYOR
  • - (4) FLOP GATES
  • - MIDDLE DECK CHUTE DISCHARGES ONTO MIDDLE OR BOTTOM DECK CROSS
  • CONVEYOR
  • -(4) FLOP GATES
  • - BOTTOM DECK CHUTES DISCHARGE ONTO CROSS CONVEYOR
  • FINES HOPPER:
  • - 1/4" AR CONSTRUCTION
  • - FULL LENGTH RUBBER ADJUSTABLE FLASHING
  • (1) 42" SCREEN FEED CONVEYOR:
  • - STRUCTURAL STEEL CHANNEL MAIN FRAME
  • - ROCK BOX HOPPER RECEIVES FEED MATERIAL FOR SCREEN
  • - ADJUSTABLE RUBBER FULL LENGTH OF ROCK BOX HOPPER
  • - FULL LENGTH STEEL SKIRTING (NO FLASHING PAST HOPPER)
  • - CLASS II HEAD END DRIVE
  • - 25 HP MOTOR V-BELT DRIVE WITH DRIVE GUARD
  • - DODGE SHAFT MOUNT REDUCER
  • - HEAD PULLEY: 14" DIAMETER DRUM CROWN FACE 3/8" DIAMOND LAGGING
  • - TAIL PULLEY: 14" DIAMETER WING PULLEY
  • - SHAFTS TURNED AND POLISHED
  • - DODGE BEARINGS
  • - MANUAL SCREW TAKE-UPS
  • - C5 IMPACT IDLERS IN LOAD ZONE
  • - CARRY IDLERS: C5 20 DEGREE TROUGH CHANNEL MOUNT SPACED 26" ON
  • CENTER
  • - BELTING 3 PLY 1/4" X 1/16" 330 PIW
  • - VULCANIZED BELT SPLICE
  • - HYDRAULIC CYLINDERS RAISE CONVEYOR FROM TRAVEL TO OPERATING
  • POSITION
  • - EXTERRA PRIMARY BELT CLEANER
  • (3) 30" WIDE X 11- LONG REVERSING CROSS CONVEYORS:
  • - STRUCTURAL STEEL CHANNEL MAIN FRAME
  • - MOUNTED ON ROLLERS TO MANUALLY MOVE TO DISCHARGE FROM EITHER
  • SIDE OF CHASSIS
  • - RECEIVE OVERSIZE MATERIAL FROM RESPECTIVE MIDDLE AND BOTTOM
  • DECKS
  • - CLASS II HEAD END
  • - 7.5 HP MOTOR V-BELT DRIVE WITH DRIVE GUARD
  • - DODGE SHAFT MOUNT REDUCER
  • - HEAD PULLEY: 10" DIAMETER DRUM CROWN FACE 3/8" DIAMOND LAGGING
  • - TAIL PULLEY: 10" DIAMETER WING PULLEY
  • - SHAFTS TURNED AND POLISHED
  • - DODGE BEARINGS
  • - MANUAL SCREW TAKE-UPS
  • - CARRY IDLERS: C5 20 DEGREES TROUGH CHANNEL MOUNT SPACED 26" ON
  • CENTER
  • - BELTING 3-PLY 3/16" X 1/16" 440 PIW
  • - VULCANIZED BELT SPLICE
  • - EXTERRA PRIMARY BELT CLEANER
  • (1) 60" FINES CONVEYOR:
  • - STRUCTURAL STEEL CHANNEL MAIN FRAME 6- DISCHARGE HEIGHT
  • - CLASS II HEAD END DRIVE
  • - 15 HP MOTOR V-BELT DRIVE
  • - DODGE SHAFT MOUNT REDUCER
  • - HEAD PULLEY: 12" DIAMETER DRUM CROWN FACE 3/8" HERRINGBONE
  • LAGGING
  • - TAIL PULLEY: 12" DIAMETER CHEVRON WING PULLEY
  • - SHAFTS TURNED AND POLISHED
  • - DODGE BEARINGS
  • - MANUAL SCREW TAKE-UPS
  • - CARRY IDLERS: C5 20 DEGREES PICKING CHANNEL MOUNT SPACED
  • APPROXIMATELY 27" ON CENTER
  • - RETURN IDLERS: C45 FLAT ROLLS SPACED 10- ON CENTER
  • - BELTING 3-PLY 3/16" X 1/16" 440 PIW
  • - VULCANIZED BELT SPLICE
  • - EXTERRA PRIMARY BELT CLEANER
  • HYDRAULIC RUN-ON LEVELING JACKS:
  • - (4) 6" X 18" HYDRAULIC CYLINDERS WITH HYDRAULIC LOCK (COUNTER
  • BALANCE VALVES BUILT INTO CYLINDER HEADS)
  • - (4) MANUAL LEVER VALVES; (1) FOR EACH CYLINDER
  • - 9 HP HONDA MOTOR GAS OVER HYDRAULIC ENCLOSED CABINET
  • WALKWAYS:
  • - 3/16" DIAMOND TREAD PLATE ALONG BOTH SIDES AND FEED END OF SCREEN
  • WITH DRAIN HOLES
  • - INCLUDES TOE BOARD AND TWO-RAIL HANDRAIL
  • - WALKWAY ACCESS ON BOTH SIDES OF THE CHASSIS WITH (2) STEEP ANGLE
  • STAIR ACCESS LADDERS
  • PAINT:
  • - (1) COAT PRIMER; (1) COAT ENAMEL; PAINTED GRAPHITE GRAY ( CARRIER
  • AND SCREEN) HANDRAILS LADDERS AND GUARDING PAINTED ORANGE
  • - GUARDING FOR DRIVE AND TAIL PULLEYS V-BELT DRIVE AND RETURN IDLERS.
  • GUARDS MAY NOT MEET ALL LOCAL CODES; CUSTOMER IS RESPONSIBLE TO
  • HAVE GUARDING INSPECTED.
  • ELECTRICAL ENCLOSURE WITH SHORT LEGS - WILL SET ON FRAME FOR TRAVEL - REMOVE
  • TO OPERATE;
  • - MAIN BREAKER
  • - 50 HP SCREEN
  • - 25 HPOVERHEAD FEED CONVEYOR
  • - 20 HP UNDERSCREEN PRODUCT CONVEYOR
  • - (3) 5 HP CROSS CONVEYOR
  • - (1) SPARE 50 HP STARTER AND BREAKER - CUSTOMER TO SUPPLY AND
  • INSTALL RECEPT.
  • - (2) SPARE 20 HP STARTERS AND BREAKERS - CUSTOMER TO SUPPLY AND
  • INSTALL RECEPT.
  • - (1) 5 HP SPARE FOR FUTURE SLIDE IN REJECT CONVEYOR
  • - 110 OUTLET ON PANEL SIDE
  • - BUTTONS IN THE PANEL DOOR - UPPER LEFT CORNER
  • - NO POWER CORD
  • - ALL MOTORS WIRED TO PANEL LOCATED ON LEFT REAR OF PLANT WITH
  • ENOUGH CORD TO LOCATE PANEL 30- AWAY

Make An Offer

INTERESTED IN THIS MACHINE? SEND US A MESSAGE.

Fields with asterisks* are required.

Send to a Friend

Fields with asterisks* are required.