2018 Superior 6203-ADWP Washing Equipment For Sale

2018 Superior 6203-ADWP Washing Equipment For Sale
  • Price
  • $445,000 USD
  • Description
  • SUPERIOR AGGREDRY WASH PLANT
  • Hours
  • 509.4
  • Inventory ID
  • E00052158
  • Serial
  • 1197115
(800) 437-2924
Machine Location:
View Google Map
General Equipment & Supplies, Inc.
4300 Main Ave
Fargo, North Dakota 58103

Details

  • Inventory ID: E00052158
  • Status: On Yard
  • Make: Superior
  • Model: 6203-ADWP
  • Year: 2018
  • Serial#: 1197115

Equipment Text

  • (1) - SUPERIOR 6203-ADWP AGGREDRY WASH PLANT EQUIPPED AS PER BELOW:
  • CARRIER CHASSIS:
  • - MAIN FRAME CONSTRUCTED OF WIDE FLANGE STRUCTURAL STEEL BEAMS
  • - QUAD AXLE WITH (16) 11X22.5 RADIAL TIRES SPRING SUSPENSION
  • - COMPLETE AIRE BRAKE SYSTEMWITH MUDFLAPS TRAVEL LIGHTS WITH BRAKE AND
  • DIRECTIONAL SIGNALS
  • - FIFTH WHEEL HITCH
  • - CRANK-DOWN LANDING GEAR 2-SPEED
  • - (6) FIXED STRUCTURAL STEEL CRIBBING LEGS
  • - GREASE PACKAGE - CONSISTING OF 1-2 LOCATION TO GREASE ENTIRE PLANT
  • SUPERIOR GUARDIAN 6203 HORIZONTAL VIBRATING SCREEN:
  • - 40 HP TEFC 1200 RPM 480 VOLT 3 PHASE 60 HZ SCREEN DRIVE MOTOR
  • - COIL SPRINGS
  • - RIGHT HAND DRIVE
  • - 5- PANELS
  • - SUBFRAME
  • - SPRAY SYSTEM
  • - FEED BOX WITH 1/4" AR LINERS
  • SUPERIOR 36" TWIN FINE MATERIAL WASHER:
  • - (2) 15 HP TEFC 1800 RPM 480 VOLT 3 PHASE 60 HZ ELECTRIC MOTORS
  • - 1/4" ASTM A36 STEEL
  • - OUTBOARD PILLOW BLOCK BEARINGS
  • - OVER-FLOW FLUME WITH ADJUSTABLE WEIR
  • - MATERIAL DISCHARGE CHUTE
  • - TAIL END FEED HOPPER AND TUBBAFFLE
  • - VARIABLE SPEED
  • - URETHANE WEAR SHOES
  • - SPIRAL TYPE SHAFT HALF PITCH FLIGHTED FOR HICH CAPACITY WITH ADJUSTABLE
  • MOUNTS
  • - WEIR WATER OVERFLOW DOWNSPOUT ON EACH SIDE OF FINE MATERIAL WASHER
  • - V-BELT DRIVE WITH GUARD
  • - DODGE SHAFTMOUNT GEAR BOX
  • SUPERIOR 5- X 10- SINGLE DECK DEWATERING SCREEN:
  • - (2) 11.4 HP 1800 RPM ELECTRIC VIBRATORS WITH ADJUSTABLE COUNTER WEIGHTS
  • 230/480V/3PH/60HZ
  • - ADJUSTABLE FROM 3.2G TO 6.4G AT 60HZ
  • - ADJUSTABLE MOTOR SLIDE TO FIND CENTEROF GRAVITY FOR VARIOUS BED ANGLES
  • - RIGID WELDED FRAME CONSTRUCTED OF 1/2 A36 STEEL
  • - SINGLE-MEMBER WELDMENT UTILIZING HEAVY PIPE CROSS MEMBERS FOR A BASE WHICH
  • SUPPORTS REINFORCED STEEL U-CHANNELS
  • - HEAVY STEEL COMPRESSION SPRINGS
  • - ADJUSTABLE FROM -5 TO +5 DEGREES
  • - 1- X 2- REPLACEABLE URETHANE 0.25MM APERATURE SNAP-DECK
  • - 1- X 4- X 1.25" RUBBER BOLT-ON SIDE (TO FIT LENGTH)
  • ROLL-AWAY SCREEN DISCHARGE CHUTES WITH BLENDING GATES:
  • - ROLLERS MOUNTED UNDER CHUTE SUPPORT STRUCTURE
  • - CONSTRUCTED OF 1/4" MILD STEEL WITH 1/4" AR400 LINER
  • - DESIGNED TO MOVE DISCHARGE CHUTES AWAY FROM THE SCREEN
  • - ALLOWS FOR ACCESS TO THE FRONT OF SCREEN FOR MAINTENANCE
  • - (4) FLOP GATES IN EACH CHUTE; EACH GATE MANUALLY OPERATED BYA LEVER OUTSIDE
  • THEIR RESPECTIVE CHUTE
  • - TOP DECK CHUTE DISCHARGES OVER THE KINGPIN END OF THE CHASSIS OR ONTO MIDDLE
  • DECK CROSS CONVEYOR 25% BLENDING GATES
  • - MIDDLE DECK CHUTE DISCHARGES ONTO MIDDLE OR BOTTOM DECK CROSS CONVEYOR 25%
  • BLENDING GATES
  • - BOTTOM DECK CHUTES DISCHARGES ONTO BOTTOM OR "BLENDS UP" TO MIDDLE DECK CROSS
  • CONVEYOR 25% BLENDING GATES
  • - AR LINERS ON BOTH SIDES OF BLENDING GATES
  • (2) 30" X 12- LONG REVERSING CROSS CONVEYORS:
  • - 7.5 HP MOTOR V-BELT DRIVE WITH DRIVE GUARD
  • - STRUCTURAL STEEL CHANNEL MAIN FRAME
  • - MOUNTED ON ROLLERS TO MANUALLY MOVE TO DISCHARGE FROM EITHER SIDE OF CHASSIS
  • - RECEIVE OVERSIZE MATERIAL FROM RESPECTIVE MIDDLE AND BOTTOM DECKS
  • - CLASS II HEAD END DRIVE
  • - DODGE SHAFT MOUNT REDUCER
  • - HEAD PULLEY - 10" DIAMETER DRUM CROWN FACE 3/8" DIAMOND LAGGING
  • - TAIL PULLEY - 10" DIAMETER WING PULLEY
  • - SHAFTS TURNED AND POLISHED
  • - DODGE BEARINGS
  • - MANUAL SCREW TAKE UPS
  • - CARRY IDLERS - C5 20 DEGREESTROUGH CHANNEL MOUNT SPACED 26"OC
  • - BELTING - 3-PLY 3/16" X 1/16" 330 PIW
  • - VULCANIZED BELT SPLICE
  • - SUPERIOR EXTERRA PRIMARY BELT CLEANER
  • UNDERSCREEN FLUME:
  • - 1/4" AR CONSTRUCTION
  • - SPRAY BAR AT FEED AND DISCHARGE END
  • - DIRECTS FINESMATERIAL FROM SCREEN INTO FMW
  • SPRAY BARS:
  • - (16) 1.5" GALVANIZED SPRAY BARS AND ELBOWS BRASS NOZZLES
  • - FLEXIBLE RUBBER HOSING FROM MANIFOLD TO SPRAY BARS
  • - MANUALLY ADJUSTABLE SPRAY BAR FOR EACH SPRAY BAR MOUNTED BELOW WALKWAY
  • WATER MANIFOLD:
  • - 8" BOLT FLANGE AT GROUND LEVEL FOR FRESH WATER HOOKUP
  • - FRESH WATER FEEDS IN FROM END
  • - DISTRIBUTES WATER TO: SPRAY BARS SLURRY HOPPER FMW WASH BACK FINES HOPPER
  • AND BOOST PUMP
  • BOOST PUMP:
  • - 7.5 HP ELECTRIC MOTOR 480V 3 PHASE
  • - 3" CAST IRON WATER PUMP
  • WYE STRAINER:
  • - BOLT-ON WYE STRAINER FOR FRESH WATER SUPPLY TO PREVENT DEBRIS FROM ENTERING
  • WASH SYSTEM
  • SLURRY HOPPER:
  • - HYDRAULICALLY FOLDS FROM TRANSPORT TO OPERATING POSITION
  • - ACCEPTS FEED FROM CONVEYORAND FEEDS ONTO FEEDBOX OF SCREEN LINED FOR WEAR
  • PROTECTION
  • - SPRAY BARS MOUNTED INSIDE HOPPER
  • - DOUBLE ROW OF HIGH FLOW SPRAY NOZZLES TO SLURRY MATERIAL
  • WALKWAY:
  • - 3/16" DIAMOND TREAD PLATE ALONG BOTH SIDES AND FEED END OF SCREEN
  • - 3/16" DIAMOND TREAD PLATE ALONG DISCHARGE CHUTE FOR EASIER ACCESS TO THE
  • BLENDING GATES AND DISCHARGE CHUTE
  • - INCLUDES TOE BOARD AND TWO-RAIL HANDRAIL BOLT ON
  • - WALKWAY ACCESS ON BOTH SIDES OF THE CHASSIS WITH STEEP ANGLE STAIR ACCESS
  • -DRAIN HOLES
  • HYDRAULIC "LIFT ONLY" LEVELING JACKS:
  • - (4) 6" X 20" HYDRAULIC CYLINDERS
  • - (4) MANUAL LEVER VALVES; (1) FOR EACH CYLINDER
  • - 12 VOLT HYDRAULIC PUMPING UNIT
  • ADDITIONAL SPECIFICATIONS:
  • - PAINT: STANDARD SUPERIOR PAINT - WINDOW GRAY (RAL 7040) FOR SCREEN WINDOW
  • GRAY (RAL 7040) FOR AGGRE-DRY CHASSIS PAINTED GRAPHITE GRAY (RAL 7024)
  • ORANGE GUARDING CATWALKS HANDRAILS AND LADDERS
  • - GUARDING: FOR DRIVE AND TAIL PULLEYS V-BELT DRIVE AND RETURN IDLERS. GUARDS
  • MAY NOT MEET ALL LOCAL CODES; CUSTOMER IS RESPONSIBLE TO HAVE GUARDING
  • INSPECTED
  • AES ELECTRICAL SWITCHGEAR FOR 6X20 AGGREDRY WASH PLANT:
  • - 60X48 NEMA 4 ENCLOSURE WITH BACK PANEL EQUIPPED AS FOLLOWS:
  • - 400 AMP MAIN CIRCUIT BREAKER WITH ROTARY OPERATOR LOCKABLE
  • - CUSTOM LEG KIT AND WELDED UPPER LEG SECTIONS
  • - DRIP SHIELD
  • - ILLUMINATED E-STOP OPERATOR
  • - MANUALLY OPERATED SIGNAL START UP HORN
  • - HOUR METER
  • - ALL CONTROLS INSTALLED IN ENCLOSURE DOOR
  • - (3) 100 FOOT LENGTH RUNS OF 250W POWER SUPPLY CABLE
  • - (1) 100 FOOT LENGTH RUN OF 4/0W EQUIPMENT GROUND
  • - (1) NEMA SIZE 3 FVNR MOTOR STARTER SCREEN MOTOR - 40HP
  • - (2) NEMA SIZE #2 (OR #1) FOR 11.4 HP DEWATER SCREEN MOTORS- SINGLE BUTTON
  • START
  • - (1) ABBACS850 30 HP VARIABLE FREQUENCY DRIVE TO OPERATE TWIN 15 HP SCREW
  • MOTORS WITH POTENTIOMETER SPEED CONTROL
  • - (4) NEMA SIZE 2 FVNR MOTOR STARTERS SPARE 1-4- 20HP EACH WIRED TO 60 AMP
  • HUBBELL RECEPTACLES.
  • - (2) NEMA SIZE 1 FVNR MOTORSTARTERS CROSS CONVEYOR 1 AND 2 7.5HP EACH
  • - (1) NEMA SIZE #1 7.5 HP FVNR-BOOST PUMP
  • - (1) 100 AMP FEED BREAKER WIRED TO A 100 AMP HUBBELL RECEPTACLE.
  • - (1) 60 AMP FEED BREAKER WIRED TO A 60 AMP HUBBELL RECEPTACLE.
  • - 5 KVA TRANSFORMER EXTERNALLY MOUNTED.
  • - (1) 120 VOLT 20 AMP GFCI DUPLEX RECEPTACLE INSTALLED IN WEATHERPROOF BOX AND
  • COVER

Make An Offer

INTERESTED IN THIS MACHINE? SEND US A MESSAGE.

Fields with asterisks* are required.

Send to a Friend

Fields with asterisks* are required.

0.99% Financing for 48 Months

Check out our financing special offering 0.99% for 48 months!