2016 Superior P400RD Crusher - Cone For Sale

  • Description
  • P400 REAR DISCHARGE
  • Hours
  • 360.4
  • Inventory ID
  • E00048464
  • Serial
  • 913659
(800) 437-2924
General Equipment & Supplies, Inc.

Equipment is on rent
Contact your Salesperson for more information

Details

  • Inventory ID: E00048464
  • Status: On Rent
  • Make: Superior
  • Model: P400RD
  • Year: 2016
  • Serial#: 913659

Equipment Text

  • SUPERIOR PATRIOT P400RD REAR DISCHARGE CONE PLANT EQUIPPED AS PER BELOW:
  • CARRIER CHASSIS:
  • - MAIN FRAME CONSTRUCTED OF WIDE FLANGE STRUCTURAL STEEL BEAMS
  • - TRIPLE AXLE WITH (12) 11X22.5 RADIAL TIRES
  • - COMPLETE AIR BRAKE SYSTEM
  • - MUD FLAPS ON REAR AXLE
  • - TRAVEL LIGHTS WITH BRAKE AND DIRECTIONAL SIGNALS
  • - FIFTH WHEEL HITCH
  • - (6) FIXED STRUCTURAL STEEL CRIBBING LEGS
  • - GREASE PACKAGE CONSISTING OF 1-2 LOCATIONS FOR GREASING ENTIRE
  • PLANT
  • P400 CONE CRUSHER:
  • - P400 CONE CRUSHER ALL PERTINENT ITEMS AND COMPONENTS INCLUDING:
  • MOTOR SHEAVE CRUSHER SHEAVE V-BELT DRIVE GUARD LUBRICATION
  • SYSTEM FEED HOPPER
  • - STANDARD MEDIUM LINERS
  • - COUNTER SHAFT BLOWER
  • - VANTAGE AUTOMATION PACKAGE WITH 100- TETHER
  • - DRIVE SHEAVE: 10-GROOVE 8V CRUSHER SHEAVE
  • - 400 HP 1200 RPM 480V/3PH/60HZ
  • ADJUSTMENT RING:
  • - (10) CLAMPING CYLINDER
  • - (5) INDEXING PINS
  • - (3) VIBRATION SENSORS DETECT ADJUSTMENT RING MOVEMENT
  • STANDARD HYDRAULIC POWER UNIT:
  • - STEEL 50 GALLON TANK
  • -SKID TYPE MOUNT
  • - TOP COVER MOUNTED MOTOR
  • - SUBMERGED GEAR TYPE PUMP
  • - SOLENOID CONTROL VALVES
  • - BLADDER TYPE CLAMPING CYLINDER ACCUMULATOR
  • PACKAGE LUBE ASSEMBLY:
  • LUBE TANK:
  • - SKID MOUNTED 120 GALLON CAPACITY
  • - 6KW LUBE TANK HEATER
  • OIL PUMP:
  • - SUBMERGED GEAR TYPE 30-35GPM FLOWS
  • - 20 MICRON OIL FILTER WITH REPLACEABLE CARTRIDGE
  • - FILTER BYPASS RELIEF VALVE
  • - (2) PRESSURE DIFFERENTIAL SWITCHES FOR A DIRTY FILTER WARNING AND
  • FULL BYPASS ALARM
  • AIR COOLER:
  • - AIR TYPE LUBE SYSTEM OIL COOLER
  • - RELIEF VALVE AND RELATED COOLER PIPING
  • HOPPERS AND CHUTES:
  • - UNDER-CRUSHER GATHERING HOPPER CONSTRUCTED OF 3/8" AR400 STEEL
  • - DIRECTS MATERIAL ONTO THE REAR DISCHARGE CONVEYOR
  • - ADJUSTABLE RUBBER FLASHING FULL LENGTH OF HOPPER
  • - OVER-FLOW CHUTE CONSTRUCTED OF 1/4" MILD STEEL
  • - DIRECTS OVER-FLOW MATERIAL FROM FEED BASKET ONTO THE REAR
  • DISCHARGE CONVEYOR
  • 42" REAR DISCHARGE CONVEYOR"
  • - SCTRUCTURAL STEEL CHANNEL MAIN FRAME
  • - CLASS 2 DRIVE - 20 HP MOTOR V-BELTDRIVE SHAFT MOUNT REDUCER
  • - CAPACITY 500STPH OF 100 PCF MATERIAL 8- LIFT
  • - BELT SPEED - 200 FPM
  • - HEAD PULLEY - 14" DIAMETER CROWN FACE 3/8" HERRINGBONE LAGGED
  • DRUM
  • - TAIL PULLEY - 12" DIAMETER CHEVRON WING PULLEY
  • - REXNORD BEARINGS
  • - MANUAL SCREW TAKE-UPS
  • - LOAD AREA IDLERS - SUPERIOR SEAL SYSTEM
  • - CARRY IDLERS - C5 20 DEGREES TROUGH LOW PRO STD MOUNT SPACED 3.5- OC
  • - RETURN IDLERS - C5 FLAT STEEL ROLLS
  • - BELTING 3 PLY 3/16" X 1/16" 330 PIW
  • - VULCANIZED BELT SPLICE
  • - BELT CLEANER - EXTERRA PRIMARY BELT CLEANER
  • WALKWAY:
  • - 3/16" DIAMOND TREAD PLAT TWO-RAIL HAND RAIL TOE BOARD
  • - INSTALLED ON BOTH SIDES OF CRUSHER TO ACCESS LUBE SYSTEM AND
  • OBSERVATION PLATFORM
  • - ELEVATED PLATFORM TO OBSERVE CRUSHER FEED AREA
  • - TWO SLIDING LADDER ASSEMBLIES TO GAIN ACCESS TO LOWER PLATFORM
  • HYDRAULIC RUN-ON JACKS:
  • - (6) 6" X 18" HYDRAULIC CYLINDERS
  • - COUNTERBALANCE VALVE LOCKING SYSTEM THAT REQUIRES NO PINNING
  • - (6) MANUAL LEVER VALVES (1) FOR EACHCYLINDER
  • - 13 HP HONDA GASOLINE OVER HYDRAULIC PUMP UNIT
  • PAINT:
  • - (1) COAT PRIMER (1) FINISH COAT ENAMEL - PAINTED TEREX WHITE
  • GUARDING:
  • - GUARDING WE DO NOT GUARANTEE GUARDING WILL PASS EVERY
  • INSPECTORS CHECKLIST IT IS THE RESPONSIBILITY OF THE END USER TO
  • MAKE SURE THE EQUIPMENT MEETS MSHA REQUIREMENTS AND
  • REQUIREMENTS OF THE INDIVIDUAL OF THE INDIVIDUAL INSPECTOR.
  • ELECTRICAL SWITCHGEAR P400RD AS DESCRIBED BELOW:
  • - NEMA 4 ENCLOSURE CORD CAGE LEG KIT SETS ON GROUND FOR
  • OPERATIONS SETS OVER KINGPIN FOR TRANSPORT. MAIN BREAKER WITH
  • LOCKABLE OPERATOR.
  • - 400 HP SOFT STARTER
  • - FVNR 10 HP LUBE MOTOR
  • - FVNR 10 HP HYDRAULIC PUMP
  • - FVNR 5 HP COOLING FAN
  • - FVNR 1/3 HP COUNTERSHAFT BLOWER
  • - 6 KW 480V 3PH TANK HEATER FEED BREAKER
  • - 6 KW 480V 3 PH HYD TANK HEATER FEED BREAKER (MAY NOT BE ONE)
  • - FVNR 20 HP CRUSHER DISCHARGE (ON PLANT)
  • - FVNR 20 HP (INTERLOCKED) FEED CONVEYOR WITH 60 AMP HUBBELL RECEPT
  • - FVNR 20 HP RETURN CONVEYOR WITH 60 AMP HUBBELL RECEPT
  • - 100FT REMOTE PENDANT E-STOP HOUR METER SAFETY START HORN.
  • - VANTAGE AUTOMATED PLC INTERFACE FOR CRUSHER CONTROL AND
  • MONITORING.
  • - 100- OF PARALLEL 250W AND (1) 4/0 GROUND POWER CORDS

Make An Offer

INTERESTED IN THIS MACHINE? SEND US A MESSAGE.

Fields with asterisks* are required.

Send to a Friend

Fields with asterisks* are required.