2017 FABTEC 1313 Crusher - Cone For Sale

  • Description
  • JCI/CR/FABT CONE PLANT
  • Inventory ID
  • E00050141
  • Serial
  • PCS-4-465-17
(800) 437-2924
General Equipment & Supplies, Inc.

Equipment is on rent
Contact your Salesperson for more information

Details

  • Inventory ID: E00050141
  • Status: On Rent
  • Make: FABTEC
  • Model: 1313
  • Year: 2017
  • Serial#: PCS-4-465-17

Equipment Text

  • 1313 STYLE FABTEC/JCI/TEREX 6203 K300S PORTABLE CLOSE CIRCUIT CRUSHING/SCREENING
  • PLANT EQUIPPED AS DESCRIBED BELOW:
  • - TEREX-MPS TSV 6-X20- 3 DECK SCREEN 40 HP 1200 TEFC. BASE FRAME
  • END-TENSIONED BOTTOM DECK RH DRIVE COIL SPRINGS.
  • - K300S CONE CRUSHER:
  • - AGGRESSIVE STROKE MAXIMUM PRODUCTION CONE CRUSHER WITH
  • PATENTED TRAMP IRON RELIEF SYSTEM WITH PRESSURE RELIEF VALVES FOR
  • RELIEVING CRUSHER DURING TRAMP IRON EVENTS. LARGE BORE H-D RELIEF
  • CYLINDERSREQUIRE LOWER PRESSURE WITH HIGH HOLD DOWN FORCE.
  • HYDRAULIC THREAD ADJUSTMENT FOR QUICK EASY SETTING CHANGES
  • AND EVEN BOWL LINER WEAR. HYDRAULIC CHAMBER CLEARING AND
  • PATENTED HYDRAULIC THREAD LOCKING RING. INTERCHANGEABLE
  • CHAMBER CONFIGURATIONS. CONE HEAD ANTI-SPIN BRAKE. BASE FRAME
  • WEAR LINERS V-SEAT BRASS WEAR LINERS. SKID MOUNTED REMOTE
  • ADJUST HYDRAULIC POWER UNIT WITH 15 HP MOTOR PLC HYDRAULIC
  • RESERVOIR AND ELECTRICAL JUNCTION BOX. LUBE PANEL WITH 3 HP
  • ELECTRIC MOTOR PUMP AND RESERVOIR WITH OIL HEATER. CONTROL
  • PANEL WITH 50- CORD. INCLUDES CHOICE OF CRUSHER MANGANESE
  • (INSTALLED) CRUSHER SHEAVE AND CRUSHER TOOLS.
  • - HYDRAULIC CONE BRAKE
  • - CONTROL PANEL W/ REAL TIME CRUSHER DIAGNOSTICS DISPLAY:
  • - PLC BASED CONTROL SYSTEM. SEQUENTIAL START-UP AND SHUT-DOWN OF
  • CONE CRUSHER. SUPPORT DEVICES INCLUDE WARNING HORN LUBE OIL
  • COOLER HYDRAULIC PUMP LUBE PUMP LUBE HEATER. CONTROL
  • FUNCTIONS INCLUDE BOWL UPPER ASSEMBLY ROTATE UP/DOWN BOWL
  • CRUSHING CHAMBER CLEARING AUTOMATED CLOSED-SIDE-SETTING
  • ADJUSTMENT. CLOSED -SIDE-SETTING VALUE CRUSHER MOTOR CURRENT(S)
  • HYDRAULIC PUMP PRESSURE HYDRAULIC BOWL CLAMP PRESSURE
  • HYDRAULIC TRAMP IRON RELIEF PRESSURE BOWL ROTATION LIMIT
  • DETECTION HYDRAULIC TEMPERATURES LUBRICATION OIL AT SUMP AND
  • RETURN TEMPERATURES LUBRICATION OIL FLOW RATE LOW LUBE OIL
  • LEVEL WARNING AND EMERGENCY STOP DETECTION. HIGH BRIGHTNESS
  • MONOCHROME DISPLAY.
  • - PAINTED CEDARAPIDS STONE GRAY
  • - 100- PANEL CABLES
  • - MANTLE P/N 04800-300-24-01; LINER P/N 04800-300-67
  • - PRODUCT RANGE 3/4" TO 3" MINUS; PINION SPEED 750RPM
  • - 300 HP 1200 RPM TEFC TECO MOTOR.
  • - COGGED BELT DRIVE SYSTEM ON 300 HP CRUSHER MOTOR.
  • - 4 AXLE CARRIER.
  • - 24" WF 76# BEAMS.
  • - HUTCH 9700 SERIES SUSPENSION: 10- WIDE TANDEM-TANDEM STYLE.
  • - 22 500# STANDARD FORGE AXLES 11:00R X22.5 TIRES.
  • - SIX GROUND SUPPORT STANDS WITH JACKING PADS.
  • - STANDARD 5TH WHEEL PLATE AIR BRAKES BRAKE LIGHTS MARKER LIGHTS
  • & MUD FLAPS.
  • - FRONT FOLD-DOWN LEGS.
  • - OPTIONAL 3 AXLE WITH BOOSTER ATTACHMENT PROVISION.
  • - HEAVY DUTY CONE MOUNT WITH AR LINED DISCHARGE HOPPER WITH
  • ADJUSTABLE SKIRT BOARD WIPERS & MAINTENANCE DOOR FOR INSPECTION
  • AND CLEAN-OUT.
  • - CONE FEED RING WITH EXPANDED METAL WINDOWS.
  • - DESIGNED WITH HOLD-DOWN BRACKETS FOR CONE ADJUSTMENT ON MVP
  • CONE.
  • -42" UNDER CONE CONVEYOR 15 HP TEFC:
  • - 5207 FALK SHAFT MOUNT REDUCER.
  • - 3 PLY BELT 1/4" COVER.
  • - IDLERS ON CLOSE CENTERS UNDER CONE THEN 36" C/C ON CEMA C SEALED
  • IDLERS.
  • - DODGE SCM BEARINGS.
  • - VULCANIZED LAGGED HEAD PULLEY SELF-CLEANING WING TAIL PULLEY.
  • - PRODUCT DISCHARGE CHUTES W/ AR LINERS DISCHARGING TO EITHER SIDE.
  • - OPTION FOR PRODUCT CROSS CONVEYOR.
  • - 42" OVERHEAD FEED CONVEYOR W/ HEAVY DUTY S-DRIVE 25 HP TEFC:
  • - HEAVY DUTY S-DRIVE WITH 16" LAGGED DRIVE PULLEY AND WINGED BEND
  • PULLEY MOUNTED WITH 2 15/16" DODGE TYPE E PILLOW BLOCK BEARINGS
  • WITH REMOTE LUBRICATION.
  • - SELF-CLEANING 14" WING TAIL PULLEY WITH DODGE SCM BEARINGS.
  • - 14" HEAD PULLEY WITH DODGE SCM BEARINGS.
  • - 3 PLY BELT IMPACT IDLERS IN FEED AREA THEN 36" SPACING ON CEMA C
  • IDLERS.
  • - FORMED SKIRT BOARD 1ST 15-.
  • - STANDARD RETURN ROLLERS.
  • - OPTION OF SLIDE-OVER SECTION FOR CONE MAINTENANCE.
  • - OPTION FOR HYDRAULIC RAISE AND LOWER.
  • - OPTIONAL CERAMIC LAGGEDDRIVE PULLEY.
  • - CLOSE CIRCUIT CHUTE BETWEEN CONE & FEED CONVEYOR WITH AR LINER.
  • - OPTION FOR TRANSFER CONVEYOR.
  • - SCREEN FEEDING 1ST AND 2ND DECK INTO CONE WITH OPTION OF 2ND DECK
  • DISCHARGING
  • - INTO PRODUCT CHUTE OR OPTIONAL CROSS CONVEYOR.
  • - 1/4" PL UNDER SCREEN COLLECTION HOPPER WITH ADJUSTABLE SKIRT BOARD
  • WIPERS.
  • - 54"X24- UNDER SCREEN CONVEYOR 10 HP TEFC:
  • - 2 PLY BELT 36" SPACING ON CEMA C PRECISION IDLERS.
  • - VULCANIZED LAGGED HEAD PULLEY SELF-CLEANING WING TAIL PULLEY.
  • - DODGE SCM BEARINGS: 2 15/16 HEAD & 2 7/16" TAIL.
  • - 20" FOLD DOWN WALKWAYS BOTH SIDES OF SCREEN & 48" BACK PLATFORM
  • WITH DIAMOND PLATE FLOOR 42" TUBESTEEL HANDRAILS & ACCESS
  • LADDER WALKWAYS BOTH SIDE OF CONE WITH LADDER.
  • -SAFETY GUARDS SAND BLASTED CHASSIS RUST INHIBITOR PRIMER AND
  • TWO FINISH COATS INCLUDED.
  • INCLUDED OPTIONS:
  • - OPTION OF 36"X10- REAR TRANSFER CONVEYOR ~VS~ TRANSFER CHUTE:
  • - 5 HP TEFC 3 PLY BELT
  • - DODGE SCM BEARINGS ON TELO TAKE-UPS.
  • - 18" SPACING ON CHANNEL INSET IDLERS.
  • - FULL LENGTH FORMED SKIRT BOARD WITH ADJUSTABLE WIPERS.
  • - PLANT MOUNTED RUN-ON HYDRAULIC STABILIZING SYSTEM:
  • - (6) BRUTE 70 000 LB RUN-ON CAPACITY HYDRAULIC LEGS WITH HEAVY DUTY
  • FOOT PADS.
  • - HONDA 8 HP POWER KIT ELECTRIC START 12 GALLON RESERVOIR WITH
  • FILTER PROTECTION 2.5 G.P.M. PUMP ~VS~ 12V POWER UNIT FOR HYD. LEGS
  • - (1) REVERSIBLE 18"X12- FAB TEC SPECIAL DESIGNED PRODUCT CROSS
  • CONVEYOR WITH SEW RIGHT ANGLEDRIVE
  • - FULL LENGTH FORMED SKIRT BOARD.
  • - VULCANIZED LAGGED HEAD PULLEY AND SELF-CLEANING WING TAIL
  • PULLEY.
  • - CHANNEL INSET IDLERS AND 2 PLY 3/16 COVER BELT.
  • - HYDRAULIC FEED CONVEYOR LIFT & LOWER.
  • - HYDRAULIC SCREEN LIFT &LOWER FEATURE FOR TRANSPORTATION
  • AVAILABLE WITH FEED CONVEYOR LIFT ONLY IF 2 1/2° SCREEN IS USED.
  • - HYDRAULIC FEED CONVEYOR SLIDE OVER SECTION FOR EASE IN CONE
  • MAINTENANCE.
  • THIS IS A RECOMMENDED OPTION.
  • - 2 PIECE SCREEN CHUTE.
  • - 1/3-2/3 BLENDING FOR 3RD DECK TO UNDER SCREEN CONVEYOR.
  • - FRONT TOW HOOKS ON CARRIER.
  • - TOOL BOX.
  • - (2) ADDITIONAL IMPACT ROLLERS IN FEED AREA OF FEED CONVEYOR.
  • - VULCANIZE SPLICE ALL BELTS (EXCEPT 2 18" CROSS CONVEYORS):
  • - TURNBUCKLE SCREEN TIE-DOWNS.
  • - REJECT CONVEYOR PROVISION.
  • - CERAMIC LAGGED DRIVE PULLEY ~VS~ STANDARD VULCANIZED RUBBER
  • LAGGED DRIVE.
  • - AES ELECTRICAL SWITCHGEAR:
  • - 60X60 ENCLOSURE WITH MAIN AND OPERATOR - LOWER RH REVERSE
  • FEED
  • - 300 HP ABB SOFTSTART WITH BYPASS CONNECTOR
  • - NEMA RATED FVNR STARTERS WITH CIRCUIT BREAKERS
  • - 40 HP SCREEN
  • - 25 HP OVERHEAD FEED
  • - 20 HP SPARE 1 WITH 60 AMP CONNECTOR
  • - 20 HP SPARE 2 WITH 60 AMP CONNECTOR
  • - 60 AMP FEED BREAKER WITH 60 AMP CONNECTOR
  • - 100 AMP FEED BREAKER WITH 100 AMP CONNECTOR
  • - 10 HP UNDERSCREEN
  • - 15 HP UNDER CRUSHER DISCHARGE
  • - 7.5 SLIDE IN REJECT WITH 20 AMP CONNECTOR
  • - 5 HP CROSS 1
  • - 5 HP CROSS 2
  • - 5 HP REAR CROSS - REVERSING STARTER
  • - STARTERS FOR JCI CONE LUBE (3HP) COOLING (1HP) HYD (15HP) AND MILO
  • INTERLOCKS
  • - 7.5 KVA TRANSFORMER WITH 20 A 110V SERVICE HOUR METER SAFETY
  • STARTUP HORN (MANUAL) E-STOP 100FT REMOTE PENDANT
  • - 100 FT POWER CORD
  • - GUARDING - WE DO NOT WARRANT THAT OUR GUARDS WILL MEET ALL
  • LOCAL CODES. IT IS THE RESPONSIBILITY OF THE END USER TO HAVE THEM
  • CHECKED BY A LOCAL INSPECTOR
  • OPTIONS TO BE ADDED:
  • - MASTER MAG 12 PSM 6 MAGNET
  • - METAL DETECTION SYSTEM

Make An Offer

INTERESTED IN THIS MACHINE? SEND US A MESSAGE.

Fields with asterisks* are required.

Send to a Friend

Fields with asterisks* are required.