2016 Superior 2000 VSI Crusher - Impact For Sale

  • Price
  • $336,500 USD
  • Description
  • IMPACTOR PLANT
  • Hours
  • 166.4
  • Inventory ID
  • E00048798
  • Serial
  • 934977
(800) 437-2924
Machine Location:
View Google Map
General Equipment & Supplies, Inc.
4600 Valley Industrial Blvd S
Shakopee, Minnesota 55379

Details

  • Inventory ID: E00048798
  • Status: On Yard
  • Make: Superior
  • Model: 2000 VSI
  • Year: 2016
  • Serial#: 934977

Equipment Text

  • SUPERIOR/CANICA 2000 VSI IMPACTOR PLANT EQUIPPED AS PER BELOW:
  • CARRIER CHASSIS:
  • - MAIN FRAME CONSTRUCTED OF WIDE FLANGE STRUCTURAL STEEL BEAMS
  • - TANDEM AXLE WITH (8) 11 X 22.5 RADIAL TIRES
  • - COMPLETE AIR BRAKE SYSTEM
  • - MUD FLAPS ON REAR AXLE
  • - TRAVEL LIGHTS WITH BRAKE AND DIRECTIONAL SIGNALS
  • - FIFTH WHEEL HITCH
  • - CRANK DOWN LANDING GEAR
  • - (4) FIXED STRUCTURAL STEEL CRIBBING LEGS
  • HOPPERS AND CHUTES:
  • - UNDER-CRUSHER GATHERING HOPPER CONSTRUCTED OF 3/8" AR400 STEEL
  • - DIRECTS MATERIAL ONTO THE REAR DISCHARGE CONVEYOR
  • - ADJUSTABLE RUBBER FLASHING FULL LENGTH OF HOPPER
  • 48" X 36- REAR DISCHARGE CONVEYOR:
  • - STRUCTURAL STEEL CHANNEL MAIN FRAME
  • - CLASS 2 DRIVE - 20 HP MOTOR V-BELT DRIVE SHAFT MOUNT REDUCER
  • - CAPACITY400 STPH OF 100 PCF MATERIAL 8- LIFT
  • - BELT SPEED 200 FPM
  • - HEAD PULLEY 14" DIAMETER CROWN FACE 3/8" HERRINGBONE LAGGED DRUM
  • - TAIL PULLEY 12" DIAMETER CHEVRON WING PULLEY
  • - REXNORD BEARINGS
  • - MANUAL SCREW TAKE-UPS
  • - LOAD AREA IDLERS C5 20 DEGREE TROUGH SPACED 12"
  • - CARRY IDLERS C5 20 DEGREE TROUGH SPACED 3-
  • - RETURN IDLERS C5 FLAT STEEL ROLLS
  • - 3 PLY BELTING 3/16" X 1/16" 330 PIW
  • - VULCANIZED BELT SPLICE
  • - EXTERRA PRIMARY BELT CLEANER
  • - FULL LENGTH SKIRTING
  • - FLAT COVERS ENTIRE LENGTH
  • WALKWAY:
  • - 3/16" DIAMOND TREAD PLATE TWO-RAIL HAND RAIL TOE BOARD
  • - INSTALLED ON BOTH SIDES OF CRUSHER AND OBSERVATION PLATFORM
  • - ELEVATED PLATFORM TO OBSERVE CRUSHER FEED AREA
  • - (1) LADDER TO BE USED FOR ACCESS ON EITHER SIDE OF CHASSIS
  • - WALKWAY TO COVER ENTIRE FIFTH WHEEL SECTION WITH REMOVEABLE
  • RAILING
  • HYDRAULIC LIFT ONLY JACKS:
  • - (4) 5" X 16" HYDRAULIC CYLINDERS
  • - (4) MANUAL LEVER VALVES (1) FOR EACH CYLINDER
  • - 12 VOLT HYDRAULIC PUMPING UNIT
  • TEREX/CANICA 2000 VSI IMPACT CRUSHER:
  • - 2000 HEAVY DUTY (HD) CLAD ENCLOSED ROTOR
  • - TECO 300 HP 1200 RPM 586/7UZ FRAME WITH STAINLESS STEEL BREATHER
  • DRAINS INSTALLED FOR SHAFT DOWN OPERATION
  • - LARGE ROLLER BEARINGS
  • - ASTRALLOY MAIN SHAFT WITH NON GREASE FLYWHEEL SEAL
  • - CAST CHROME PEDESTAL PROTECTION
  • - CAST TUB AND LID LINERS
  • - MODULAR OIL LUBE SYSTEM
  • - PATENTED "HYDRALID" HYDRAULIC LID LIFTER
  • - EXTERNALLY ADJUSTABLE FEED TUBE SYSTEM
  • - FEED HOPPER WITH BANG BOARD
  • - ROCK LINEDFEED HOPPER
  • - HEAVY-DUTY MOTOR MOUNTS WITH COVERS AND ADJUSTABLE TAKE-UPS
  • - VIBRATIONS SHUT-OFF SWITCH
  • - LID SAFETY SWITCH AND LID SAFETY FOOT
  • - BELT GUARDS
  • - HEAVY DUTY TABLE
  • - CAST LINED FLYWHEEL
  • - PATENTED VAULTED ANVIL RING WITH INDEXING ADJUSTMENT OR DROP-IN
  • STOB TYPE ANVIL RING
  • - DRIVE BELTS AND SHEAVES
  • - ROCK BOX CRUSHING CHAMBER
  • - INSPECTION DOOR WITH SAFETY LCOK
  • - AUXILIARY ELECTRICAL CONTROL CABINET WITH R.P.M GUAGE VIBRATION
  • DETECTOR (WARNING LIGHT) HOUR METER OPEN-LID CRUSHER SAFETY
  • CUT-OFF 2 HP LUBE SYSTEM OIL SYSTEM HEATER STARTER AND 15 HP SPARE
  • STARTER.
  • - SANDBLASTED CHASSIS RUST INHIBITOR PRIMER AND ONE FINISH COAT
  • PAINTED TEREX WHITE (RAL1013)
  • - GUARDING: FOR DRIVE AND TAIL PULLEYS V-BELT DRIVE AND RETURN IDLERS.
  • GUARDS MAY NOT MEET ALL LOCAL CODES; CUSTOMER IS RESPONSIBLE TO
  • HAVE GUARDING INSPECTED.
  • ELECTRICAL SWITCHGEAR FOR A CANICA 300 HP VSI EQUIPPED AS PER BELOW:
  • - 60 X 60 HOFFMAN NEMA 12 RATEDENCLOSURE WITH 800 AMP LOCKABLE
  • OPERATOR
  • - 400 HP ALTIVAR 71 SERIES VFD WITH LINE REACTOR
  • - VFD MOUNTED TO CANICA SUPPLIED AUX ELECTRICAL CONTROL PANEL
  • WITH RPM GUAGE VIBRATION DETECTOR (WARNING LIGHT) HOUR METER
  • OPEN LID SAFETY CUT OFF 2 HP LUBE STARTER OIL SYSTEM HEATER
  • STARTER AND 15 HP SPARE STARTER (UNDER CRUSHER) WITH TERMINATION
  • POINTS FOR ALL SAFETY SHUTOFF SWITCHES
  • - (1) SIZE #2 FOR INTERLOCKED FEED CONVEYOR AND (3) SPARE 20 HP
  • - LEG KIT SAFETY STARTUP HORN
  • - BUTTONS IN DOOR E-STOP AMP METER VOLT METER HZ METER SPEED POT
  • - 900 CFM AIR TO AIR EXCHANGER WITH WEATHER COVER
  • - 5 KVA TRANSFORMER WITH 120V 20A SERVICE OUTLET
  • - SG SETS OF PLANT 30- FOR OPERATION
  • - 100- OF POWER CORD

Make An Offer

INTERESTED IN THIS MACHINE? SEND US A MESSAGE.

Fields with asterisks* are required.

Send to a Friend

Fields with asterisks* are required.