Fields with asterisks* are required. Your friend will receive an email that contains a reference to this page. Please send this email only to people you know who would be interested in this information.
Hopper Feeder: The Series 12 Feed Hopper has a 10 cubic yard capacity. The top opening of the hopper is 12’ long by 6’ wide. Its sidewalls are made of 3/16” steel plate. An 8 foot long belt feeder is located underneath the hopper. The feeder has a belt speed of 100 fpm, and it is powered with a gear reducer drive. The head pulley has grooved rubber lagging and the tail pulley is a self cleaning steel wing type. The rate at which material discharges from the hopper feeder is controlled by either a manually adjustable hopper gate or an optional variable frequency drive for the belt feeder.
Conveyor: The conveyor being fed by the hopper feeder has a 24” deep lattice frame. The conveyor is supported by an adjustable height, manual telescoping pin lock undercarriage on a single axle. The conveyor is powered with an electric head end v-belt drive. The conveyor belt speed is approximately 350 fpm.
Chassis: The Hopper Feeder and Conveyor are supported by a heavy duty channel type chassis. A king pin hitch is located on the feed end of the chassis below the belt feeder.
Paint: One coat of primer, finish coat of Beige acrylic.
Options: Belt Cleaners Undercarriage Lift Cylinder 7.5 Electric/Hydraulic Power Pack CEMA C Idlers Feeder Impact Idlers Conveyor Impact Idlers Rubber Disc Returns
Hopper Capacity (cu yards / cu meters)
Top Opening (ft / cm)
Feeder Size (in x ft / mm x cm)
Feeder Motor (HP)
Capacity (TPH / MTPH)
10 / 9
12 x 6 / 366 x 183
36 x 8 / 914 x 244
600 / 544
0% Financing for 48 Months
Check out our financing special offering 0% for 48 months!