Find that New or Used piece of equipment you've been looking for!

Features
Size: 6" (152 mm) Victaulic Suction x 4"(102 mm)
Petroleum Discharge Flange.
Casing: (06D1) Aluminum 356-T6;
(06D3) Ductile Iron 60-40-18.
Maximum Operating Pressure 293 psi (2020 kPa).*
Enclosed Type, Eight Vane Impeller: Aluminum 356-T6.
Handles 7/8" (22,2 mm) Diameter Spherical Solids.
Impeller Shaft: Alloy Steel 8620.
Replaceable Wear Rings: (2) Gray Iron 30.
Suction Head: (06D1) Aluminum 356-T6;
(06D3) Ductile Iron 80-55-06.
Gearbox Housing: Gray Iron 30.
Gearbox Lubrication: SAE 90 Gear Oil.
Gears: Alloy Steel 8620 and Carbon Steel 12L14.
Gear Ratio: 2.56:1 Increase.
Bearings: Open Single Row Ball, Roller and Tapered Roller.
Gaskets: Buna-N, Resistant Synthetic Rubber and Cork.
Hardware: Standard Plated Steel.
Standard Equipment: Mounting Cross Member and Trunnion
Assembly. Air Shift. 1800 Series Dana Flanges.
Optional Equipment: Bronze Impeller. Bronze Wear Rings.
Auxiliary P.T.O. Stub Shaft. Speedometer Adaptor.
Victaulic is a Registered Trademark of Victaulic Company of America.
Dana is a Registered Trademark of Dana Corporation.
*Consult Factory for Applications Exceeding
Maximum Pressure and/or Temperature Indicated.
Specifications
Suction | 6" (152 mm) |
Discharge | 4" (102 mm) |
Solids Handling | 0.88" (22 mm) |
Material | Ductile Iron |
Impeller Material | Aluminum |
Seal Material | Carbon/Ni-Resist |
Flange | ASA |
Drive Type | PTO |
0% Financing for 48 Months
Check out our financing special offering 0% for 48 months!