Gorman-Rupp T10A60S-6068T » General Equipment & Supplies, Inc.

Gorman-Rupp T10A60S-6068T

Double tap to zoom



Size: 10” x 10” (254 mm x 254 mm) NPT ‐ Female.
Casing: Gray Iron 30. Maximum Operating Pressure 114 psi (786 kPa).*
Semi‐Open Type, Two Vane Impeller: Ductile Iron 65‐45‐12. Handles 3” (76,2 mm) Diameter Spherical Solids.
Impeller Shaft: Stainless Steel 17‐4 PH.
Replaceable Front Wear Plate: Ductile Iron 80‐55‐06.
Replaceable Rear Wear Plate: Carbon Steel M1026.
Removable Clean‐Out Cover Plate: Gray Iron 30; 9 lbs. (4 kg).
Flap Valve: Neoprene w/Steel Reinforcing.
Seal Plate: Gray Iron 30.
Shaft Sleeve: Alloy Steel 4130.
Seal: Cartridge Type, Mechanical, Oil‐Lubricated, Double Floating, Self‐Aligning. Silicon Carbide Rotating and Stationary Faces. Stainless Steel 316 Stationary Seat. Fluorocarbon Elastomers (DuPont Viton or Equivalent). Stainless Steel 18‐8 Cage and Spring. Maximum Temperature of Liquid Pumped 160F (71C).*
Bearing Housing: Gray Iron 30.
Radial/Thrust Bearings: Open Double Ball.
Bearing and Seal Cavity Lubrication: SAE 30 Non‐Detergent Oil.
Flanges: Gray Iron 30.
Suction Head: Gray Iron 30.
Gaskets: Buna‐N, PTFE, Cork, and Rubber.
O‐Rings: Buna‐N.
Hardware: Standard Plated Steel.
Brass Pressure Relief Valve.
Bearing and Seal Cavity Oil Level Sight Gauges.
Standard Equipment: Hoisting Bail. 90 Discharge Elbow. Strainer. Single
Ball Type Float Switch.**
**50 Ft. (15 m) Standard Length; Dual Switches and Alternate Cable Lengths Available From the Factory.
Optional Equipment: Battery. G‐R Hard Iron Impeller, Seal Plate and Wear Plate. High Speed (55 MPH/89 KM/H) Single Axle Pneumatic‐Tired Wheel Kit w/wo DOT‐Approved Lights and Electric Brakes.Tandem Axle Over‐the‐Road Trailer (Meets DOT Requirements) Available w/Either Electric or Hydraulic Surge Brakes, Running Lights, Jack Stands and Safety Cables/Chains. EPS w/Submersible Transducer Liquid Level Sensor (50 Ft. [15,2 M] Cable Standard, Alternate Lengths Available).
*Consult Factory for Applications Exceeding Maximum Pressure and/or Temperature Indicated.


Suction 10" (254 mm)
Discharge 10" (254 mm)
Solids Handling 3" (76 mm)
Solids Handling Cast Iron
Impeller Material Ductile Iron
Seal Material Silicon Carbide
Flange ASA
Drive Type Diesel Engine