Find that New or Used piece of equipment you've been looking for!
Super T Series® T3A60S-E5 3P
Features
Size: 3” x 3” (76 mm x 76 mm) NPT ‐ Female.
Casing: Gray Iron 30. Maximum Operating Pressure 25 psi (172 kPa).* Semi‐Open Type, Two Vane Impeller: Ductile Iron 65‐45‐12.
Handles 2 1/2” (63,5 mm) Diameter Spherical Solids.
Flap Valve: Neoprene w/Nylon and Steel Reinforcing.
Removable Adjustable Cover Plate: Gray Iron 30; 35 lbs. (16 kg).
Externally Adjustable, Replaceable Wear Plate: Carbon Steel ASTM A36.
Seal Plate: Gray Iron 30.
Retainer Flange: Gray Iron 30.
Impeller Shaft: Alloy Steel 4150.
Shaft Sleeve: Alloy Steel 4130.
Lip Seals: Buna‐N.
Radial Bearing: Permanently Lubricated Single Row Ball.
Flanges: Gray Iron 30.
Gaskets: Buna‐N w/Compressed Synthetic Fibers, PTFE, Cork and Rubber.
O‐Rings: Buna‐N.
Hardware: Standard Plated Steel.
Brass Pressure Relief Valve.
Seal Cavity Oil Level Sight Gauge.
Steel Motor Support Feet.
Optional Equipment: Strainer. 3” ASA or 80 mm DIN 2527 (PN 16) Gray Iron 30 Suction and Discharge Spool Flanges. Self‐Cleaning Wear Plate. Consult Factory for Additional Options.
MOTOR SPECIFICATIONS
Type: TEFC.
Horsepower: 5.
RPM: 1150.
Voltage: Single Phase ‐ 208‐230V/460V; 60 Hz; Frame 215TC; 1.15 S.F.; 23.3‐22.0/11.0 Approx. Full Load Amps; 176.0/88.0 Locked Rotor Amps. Three Phase ‐ 208‐230V/460V; 60 Hz; Frame 215TC; 1.25 S.F.; 15.1‐13.7/6.83 Approx. Full Load Amps; 90.1/45.0 Locked Rotor Amps. Standard Specifications Shown. Alternate Motors Available ‐ Consult Factory.
Specifications
| Suction | 3" (76 mm) |
| Discharge | 3" (76 mm) |
| Solids Handling | 2.5" (64 mm) |
| Solids Handling | Cast Iron |
| Impeller Material | Ductile Iron |
| Seal Material | Silicon Carbide |
| Flange | ASA |
| Drive Type | Electric Motor |
0% Financing for 48 Months
Check out our financing special offering 0% for 48 months!