Gorman-Rupp T6A60S-4045D » General Equipment & Supplies, Inc.

Gorman-Rupp T6A60S-4045D

Double tap to zoom



Size: 6” x 6” NPT (152 mm x 152 mm) - Female.
Casing: Gray Iron No. 30. Maximum Operating Pressure 98 psi (675 kPa).*
Open Type, Two Vane Impeller: Ductile Iron No. 65-45-12. Handles 3” (76,2 mm) Diameter Spherical Solids.
Impeller Shaft: Stainless Steel No. 17-4 PH.
Replaceable Wear Plate: Carbon Steel No. 1015.
Removable Adjustable Cover Plate: Gray Iron No. 30; 50 lbs. (23 kg).
Flap Valve: Neoprene w/Steel Reinforcing.
Intermediate: Gray Iron No. 30.
Seal Plate: Gray Iron No. 30.
Shaft Sleeve: Alloy Steel No. 4130.
Seal: Cartridge Type, Mechanical, Oil-Lubricated, Double Floating, Self-Aligning. Silicon Carbide Rotating and Stationary Faces. Stainless Steel No. 316 Stationary Seat. Fluorocarbon Elastomers (DuPont VitonR or Equivalent). Stainless Steel No. 18-8 Cage and Spring. Maximum Temperature of Liquid Pumped 160_F (71_C).*
Radial Bearing: Open Single Ball.
Thrust Bearing: Open Double Ball.
Bearing and Seal Cavity Lubrication: SAE No. 30 Non-Detergent Oil.
Flanges: 125# Gray Iron No. 30.
Gaskets: Buna-N, Compressed Synthetic Fibers, PTFE, Vegetable Fiber, Cork, and Rubber.
O-Rings: Buna-N.
Hardware: Standard Plated Steel.
Brass Pressure Relief Valve.
Bearing and Seal Cavity Oil Level Sight Gauges.
Standard Equipment: Hoisting Bail. 90_ Discharge Elbow. Strainer. Single Level Actuated (Microswitch) Type Liquid Level Control System with 50 Ft. (15,2 M) of Cable (Double Float System and Alternate Cable Lengths Available; Consult the Factory).
Optional Equipment: Battery. G-R Hard Iron Impeller and Seal Plate. Hardened Steel Wear Plate. High Speed (55 MPH/89 KM/H) Wheel Kit w/ P225/75R15 Pneumatic Tires. Over-the-Road Trailer (Meets D.O.T. and Transport Canada Requirements) w/Electric Brakes (Hydraulic Surge Brakes Optional), Running Lights, Two Trailer Jack Stands and Safety Chains. EPS w/Submersible Transducer Liquid Level Sensor (50 Ft. [15,2 M] Cable Standard, Alternate Lengths Available).
*Consult Factory for Applications Exceeding Maximum Pressure and/or Temperature Indicated.


Suction 6" (152 mm)
Discharge 6" (152 mm)
Solids Handling 3" (76 mm)
Solids Handling Cast Iron
Impeller Material Ductile Iron
Seal Material Silicon Carbide
Flange ASA
Drive Type Diesel Engine