Gorman-Rupp T8A60S-4045H » General Equipment & Supplies, Inc.

Gorman-Rupp T8A60S-4045H

Double tap to zoom



Size: 8" x 8" NPT (203 mm x 203 mm) - Female.
Casing: Gray Iron No. 30 Maximum Operating Pressure 80 psi (5,6 kg/cm2)*
Open Type, Two Vane Impeller: Ductile Iron No. 60-40-18. Handles 3" (76,2 mm) Diameter Spherical Solids.
Impeller Shaft: Alloy Steel No. 4140.
Replaceable Wear Plate: Gray Iron No. 30.
Removable Cover Plate: Gray Iron No. 30; 66 lbs. (30 kg).
Bearing Housing: Gray Iron No. 30.
Seal Plate: Gray Iron No. 30.
Seal: Mechanical, Oil-Lubricated, Double Floating, Self-Aligning. Silicon Carbide Rotating and Stationary Faces. Stainless Steel No. 316 Stationary Seat. Fluorocarbon Elastomers (DuPont Viton or Equivalent). Stainless Steel No. 18-8 Cage and Spring. Maximum Temperature of Liquid Pumped, 160 F (71 C)*
*Consult Factory for Applications Exceeding Maximum Pressure and/or Temperature Indicated.
Flap Valve: Neoprene w/Steel Reinforcement
Shaft Sleeve: Alloy Steel No. 4130
Radial/Thrust Bearing: Open Double Ball
Bearing Lubrication: Oil
Flanges: 125# Gray Iron No. 30
Gaskets: Buna-N, Compressed Synthetic Fibers, PTFE, Cork, and Rubber
O-Rings: Buna-N
Hardware: Standard Plated Steel.
Pressure Relief Valve: Brass
Oil Level Sight Gauge.
CE8A60-B-4045D-A Only: Liquid Level Controls: Submersible Transducer* and Electronic Pressure Switch (EPS) Control with Start/Stop Set Point Adjustments for Automatic Filling/Emptying.
*50 Ft.(15m) Standard Length; 150 Ft. (46 m) Maximum; Specify Length at Time or Order.


Suction 8" (203 mm)
Discharge 8" (203 mm)
Solids Handling 3" (76 mm)
Solids Handling Cast Iron
Impeller Material Ductile Iron
Seal Material Silicon Carbide
Flange ASA
Drive Type Diesel Engine