Komatsu PC290LC-10 » General Equipment & Supplies, Inc.

Komatsu PC290LC-10

Double tap to zoom



A new boom and arm design increases the working range of the machine for more digging reach.

New engine and hydraulic pump control technology improves operational efficiency and lowers fuel consumption.

A powerful Komatsu SAA6D107E-2 engine provides a net output of 147 kW 196 HP. This engine is EPA Tier 4 Interim and EU stage 3B emissions certified.

Komatsu Variable Geometry Turbocharger (KVGT) uses a hydraulic actuator to provide optimum air flow under all speed and load conditions.

Komatsu Diesel Particulate Filter (KDPF) captures 90% of particulate matter and provides automatic regeneration that does not interfere with daily operation.

Large displacement high efficiency pumps provide higher flow output and efficient operation.

Enhanced working modes are designed to match engine speed, pump delivery, and system pressure to the application.

Komatsu Closed Center Load Sensing (CLSS) hydraulic system provides quick response amd smooth operation to maximize productivity.

Large LCD color monitor panel:
■ 7" high resolution screen
■ Provides "Eco-Guidance" for fuel efficient operation
■ Enhanced attachment control

Rearview monitoring system (standard)

Equipment Management Monitoring System (EMMS) continuously monitors machine operation and vital systems to identify machine issues and assist with troubleshooting.

Enhanced working environment
■ High back, heated, and air suspension operator seat
■ Integrated ROPS cab design (ISO 12117-2)
■ Cab meets ISO Level 1 Operator Protective Guard (OPG) top guard (ISO 10262)

Komatsu designed and manufactured components

Guardrails (standard) located on the machine upper structure provide a convenient work area in front of the engine.

Swing out cooler design provides easy access to service and clean the cooler assembly.

Battery disconnect switch allows a technician to disconnect the power supply before servicing the machine.

Robust undercarriage design uses many of the same components that are used on larger machines.

KOMTRAX® equipped machines can send location, SMR and operation maps to a secure website utilizing wireless technology. Machines also relay error codes, cautions, maintenance items, fuel levels, and much more.


Model   Komatsu SAA6D107E-2*
Type   Water-cooled, 4-cycle, direct injection
Aspiration   Turbocharged, aftercooled, cooled EGR
Number of cylinders   6
Bore 4.21'' 107 mm
Stroke 4.88'' 124 mm
Piston displacement 408 in³ 6.69 ltr
SAE J1995 : Gross 213 HP 159 kW
ISO 9249/SAE J1349 : Net 196 HP 147 kW
Rated rpm   2050 rpm
Fan drive type   Mechanical
Governor   All-speed control, electronic.
*EPA Tier 4 Interim and EU stage 3B emissions certified    
Type . . HydrauMind (Hydraulic Mechanical Intelligence New Design) system, closed-center system with load sensing valves and pressure compensated valves    
Number of selectable working modes   6
Main pump:    
Type   Variable displacement piston type
Pumps for   Boom, arm, bucket, swing, and travel circuits
Maximum flow 126.5 U.S. gal/min 479 ltr/min
Supply for control circuit   Self-reducing valve
Hydraulic motors:    
Travel   2 x axial piston motor with parking brake
Swing   1 x axial piston motor with swing holding brake
Relief valve setting:    
Implement circuits 5,400 psi 380 kgf/cm²/ 37.3 MPa
Travel circuit 5,400 psi 380 kgf/cm² / 37.3 MPa
Swing circuit 4,190 psi 295 kgf/cm²/ 28.9 MPa
Pilot circuit 470 psi 33 kgf/cm² / 3.2 MPa
Hydraulic cylinders:    
Number of cylinders Bore x Stroke x Rod Diameter Bore x Stroke x Rod Diameter
Boom / 2 5.5" x 51.2" x 3.9" 140 mm x 1300 mm x 100 mm
Arm / 1 5.9" x 64.3" x 4.3" 150 mm x 1635 mm x 110 mm
Bucket / 1 5.5" x 39.7" x 3.9" 140 mm x 1009 mm x 100 mm
Drives and Brakes    
Steering control   Two levers with pedals
Drive method   Hydrostatic
Maximum drawbar pull 56,000 lb 249 kN / 25400 kg
Gradeability 35° 70%
Maximum travel speed: (Auto-Shift)    
High 3.4 mph 5.5 km/h
Mid 2.5 mph 4.1 km/h
Low 1.9 mph 3.0 km/h
Service brake   Hydraulic lock
Parking brake   Mechanical disc brake
Swing System    
Drive method   Hydrostatic
Swing reduction   Planetary gear
Swing circle lubrication   Grease-bathed
Service brake   Hydraulic lock
Holding brake/Swing lock   Mechanical disc brake
Swing speed   10.5 rpm
Swing torque 64,292 ft lbs 8889 kg•m
Center frame X-frame  
Track frame Box-section  
Seal of track Sealed track  
Track adjuster Hydraulic  
Number of shoes 48 each side  
Number of carrier rollers 2 each side  
Number of track rollers 8 each side  
Coolant & Lubricant Capacity (refilling)    
Fuel tank 105.7 U.S. gal 400 ltr
Coolant 9.5 U.S. gal 36 ltr
Engine 6.1 U.S. gal 23.1 ltr
Final drive, each side 2.2 U.S. gal 8.5 ltr
Swing drive 1.9 U.S. gal 7.2 ltr
Hydraulic tank 34.9 U.S. gal 132 ltr
Hydraulic system 66.0 U.S. gal 250 ltr
Operating Weight (approximate)    
Operating weight, including 6150 mm / 20'2" one-piece boom, 3200 mm / 10'6" arm, SAE heaped 1.41 m³ / 1.85 yd³ backhoe bucket*, rated capacity of lubricants, coolant, full fuel tank, operator, and standard equipment.    
Shoes 28" 700 mm
Operating Weight 67,396 lb 30570 kg
Ground Pressure 7.17 psi 0.50 kg/cm²
Shoes 31.5'' 800 mm
Operating Weight: 68,234 lb 30950 kg
Ground Pressure 6.36 psi 0.45 kg/cm²
Shoes 33.5" 850 mm
Operating Weight: 68,654 lb 31141 kg
Ground Pressure 6.01 psi 0.42 kg/cm²
Component Weights    
Arm including bucket cylinder and linkage    
3200 mm / 10'6" arm assembly 3,157 lb 1432 kg
3500 mm / 11'6" arm assembly 3,316 lb 1504 kg
One piece boom including arm cylinder    
6150 mm / 20'2" boom asssembly 5,397 lb 2448 kg
Boom cylinders x 2 509 lb 231 kg
Counterweight 12,148 lb 5510 kg
1.41 m³ / 1.85 yd³ bucket - 48" width 2,399 lb 1088 kg