Find that New or Used piece of equipment you've been looking for!

Features
Efficient
A mid sized 2 roller drive head designed for larger thinning and first cut applications. Two upper and one lower moveable delimbing knives proved a clean stem quality. Automatic chain tensioner with 24V programmable bar oiling helps extend bar and chain life.
Dependable and Productive
The 360.2 frame is designed for high strength and light weight with strong protected saw box. Removable rear cover provides full access to hydraulic valves and control system components. Komatsu designed ring and pinion rotator provides strong rotation power.
Application
Ideal for use with 911.4 and 931 harvesters in softwood thinning and harvesting applications. Weight from 2,745 lb; 7-17"-recommended diameter range; 26'6"- Maximum cut; 19'7"- Maximum tip to tip delimbing diameter
Specifications
Weight | From 2,745 lb (1,245 kg) |
Feed speed | 0-16.4 ft/s (0–5 m/s) |
Feed force, gross | 5,845-6,385 lbf (26-28.4 kN) (roller motor dependent) |
Feed wheel type | Steel or rubber rollers with anti-slip protection |
Delimbing knives, number | 4 |
Delimbing knives, opening, tip-to-tip | 19.7 in (500 mm) |
Bar | 29.5 in (75 cm) |
Saw motor | 1.16 cu in/rev (19 cm3/rev) |
Fell/cut diam. theor. max | 25.6 in (650 mm) |
Requisite max. hydraulic flow | 10.9 ft³/min (310 l/min) |
Requisite max. hydraulic pressure | 3,625 psi (25 MPa) |
0% Financing for 48 Months
Check out our financing special offering 0% for 48 months!