Photo Count: 9-
Price:
$950,500 USD -
Location:
Duluth, Minnesota - (800) 437-2924
Interested in this machine? Send us a message
PriceWatch
Subscribe to be notified of price changes on this item.
2022 Other Crusher - Cone P500RD
Fields with asterisks * are required.
Print This Page
Description
P500 REAR DISCHARGE CONE PLANT
Inventory ID
E00062540
Serial
PC-3-513-22
Machine Location
Details
- Inventory ID: E00062540
- Status: On Yard
- Make: Other
- Model: P500RD
- Year: 2022
- Serial#: PC-3-513-22
Notes
- NEW FABTEC/SUPERIOR PORTABLE PATRIOT P500 CONE PLANT WITH 60" REAR DISCHARGE CONVEYOR EQUIPPED AS DESCRIBED BELOW:
- HEAVY DUTY CONE MOUNT AND AR LINED UNDER CONE DISCHARGE HOPPER WITH 1/2" X 6"
ADJUSTABLE WIPERS. - CONE FEED RING WITHEXPANDED METAL WINDOWS.
- WALKWAYS AROUND CONE WITH DIAMOND PLATE FLOOR TOE BOARDS AND42" TUBESTEEL
- HANDRAILS EXTENDED TO FRONT OF MOTORS.
- 60" OVER REAR AXLE UNDER CONE CONVEYOR 20 HP TEFC:
- 5207 FALK SHAFT MOUNT REDUCER ON ALLOY SHAFT.
- VULCANIZED LAGGED HEAD PULLEY SELF-CLEANING WING TAIL PULLEY.
- 3 PLYBELTING WITH 1/4" COVER.
- DODGE SCM BEARINGS.
- CLOSE SETTING ON CEMA C IDLERS UNDER CONE THEN 36" SPACING
- VULCANIZE SPLICE 60" BELT
- 60" SUPERIOR X-TERRA BELT SCRAPER
3 AXLE CARRIER 24" WF 76# BEAMS:
- 9700 HUTCH SUSPENSION 10- SPAN.
- 10- WIDE 22 500# AXLES AND 11:00RX22.5 TIRES.
- AIR BRAKES LIGHTS REFLECTIVE TAPE MARKER LIGHTS AND MUD FLAPS.
- FOUR GROUND SUPPORT STANDS WITH JACKING LEGS.
- QTY. (2) TOOL BOXES PROVIDED (1) FOR CRUSHER TOOLS (1) FOR VANTAGE
AUTOMATION SYSTEM
SAFETY GUARDS SANDBLASTED CHASSIS RUST INHIBITOR PRIMER AND TWO FINISH COATS
OF PAINT INCLUDED. - - SELF SUPPORTING OVERSIZED HEX STYLE FEED RING WITH OVERFLOW CHUTE
- FAB TEC PLANT MOUNTED 70K RUN-ON SYSTEM:
- SPOOL VALVE~ NUMBER OF BANKS TO MATCH LEG QUANTITY .HYDRAULIC HONDA UNIT.
- (6)5" X 24" CYLINDERS 48 000 LB. CAPACITY (AT 2500 PSI) WITH SAFETY-LOK
CIRCUIT.
- HEAVY DUTY FOOT PADS
OBSERVATION STAND INCORPORATED INTO WALK-IN DRIVE GUARD:
- FOR EASY CONE DRIVE MAINTENANCE AND CONE FEED OBSERVATION.
PLATFORM IN FRONT OF CHASSIS WITH HANDRAILS:
- DIAMOND PLATE DECK.
- FULLLENGTH FORMED 3/16" SKIRTBOARD TO HEAD PULLEY:
- RUBBER DISC RETURNS - SPECIAL JACK SHAFT DRIVE FOR SINGLE 500 HP MOTOR:
- DODGE PX200 ELASTOMERIC COUPLING.
- (2) 3 15/16 TYPE -E- BEARINGS.
- 3 15/16" ALLOY SHAFT.
- ADDED STEEL FOR LOWER BEARING/ SHEAVE MOUNT.
- ADDED GUARDING.
- OBSERVATION DECK INCORPORATED INTO GUARDING. - HINGED UNDER CONE CONVEYOR FOR MAINTENANCE:
- HYDRAULIC RAISE AND LOWER OF UNDER CONE CONVEYOR
- REMA AB 50 FLASHING
- SINGLE POINT GREASESTATION FOR UNDER CONE CONVEYOR
- EXTRA PANEL STYLE GUARDING AROUND UNDER CONE CONVEYOR TAIL PULLEY SECTION
- LED LIGHTS AND STROBE LIGHTS. - FABTEC DESIGNED MAINTENANCE ACCESS PLATFORM WITH RAILINGS AND WALKWAYS.
BAG HOUSE STAND FOR UNDER CONE CONVEYOR:
-BAG HOUSE NOT INCLUDED.
-BLANKING PLATE FOR FUTURE INSTALL OF BAGHOUSE - EXTRA WALKWAYS TO EXTEND ON EACH SIDE OF BAG HOUSE
FULL LENGTH BOLT-ON DUST COVER ON TOP OF SKIRT BOARD OVER CONVEYOR - UNDER CONE CONVEYOR DISCHARGE HOOD WITH FOG NOZZLE SPRAY BAR INCLUDES MANIFOLD WITH GATE VALVE.
- GUARDING: IT IS THE RESPONSIBILITY OF THE END USER TO VERIFY AND PROVIDE PROPER
GUARDING AND ELECTRICAL INSPECTION ON ALL EQUIPMENT PRIOR TO STARTUP AND TO
REQUEST MSHA/OSHA INSPECTION. ALL EQUIPMENT COMES WITH BASIC OEM GUARDING
(UNLESS OTHERIWISE SPECIFIED) THAT MAY NOT MEET THE END USER-S SPECIFIC
REQUIREMENTS NOR THOSE OF LOCAL MSHA OR LOCAL OSHA INSPECTORS.