2021 Other 7203-38MSOF Screening Plant For Sale Stock E00060590

Interested in this machine? Send us a message

Fields with asterisks * are required

PriceWatch

Subscribe to be notified of price changes on this item.

2021 Other Screening Plant 7203-38MSOF

Fields with asterisks * are required.
Print This Page
Description
MEDIUM SCALPER OVERHEAD FEED SCREEN PLANT
Inventory ID
E00060590
Serial
P-7-20-3-564-21
  • Email a friend

    Send to a Friend

    Fields with asterisks * are required
  • Loan Calculator

    Loan Calculator

    Use the Loan Calculator to help you determine the financing and payment options that are best for you.

    Amount Financed ($)
    Interest Rate (%)
    Loan Term in Months
    Monthly Payment Calculated

    **The accuracy of this calculator and its applicability to your circumstances is not guaranteed. You should obtain personal advice from qualified professionals. This information is provided for illustrative purposes only and does not constitute an application. This notice does not guarantee loan approval, nor is it an offer or commitment to make a loan to you on the above terms.

Details

  • Inventory ID: E00060590
  • Status: On Yard
  • Make: Other
  • Model: 7203-38MSOF
  • Year: 2021
  • Serial#: P-7-20-3-564-21

Notes

  • MINE DUTY PORTABLE 7- X 20- - 3 DECK TSV CR SCREEN PLANT WITH (3) CROSS CONVEYORS AND 48" FEED CONVEYOR:
  • CEDARAPIDS TSV7203-38 MEDIUM SCALPING SCREEN:
    - 50 HP 1200 RPM
    - 5 DEGREE SLOPE
    - MEDIUM SCALPER TOP DECK
    - SIDE TENSION MIDDLEDECK
    - SIDE TENSION BOTTOM DECK
    - 4- CLAMP BARS
    - RIGHT HAND DRIVE
    - COIL SPRINGS
  • 3 AXLE CARRIER:
    - 18" WF BEAM 60#.
    - HUTCH 61" SPAN EQUALIZING SUSPENSION.
    - 22 500# STANDARD FORGE AXLES 11:00R X 22.5 TIRES.
    - AIR BRAKES BRAKE LIGHTS MARKER LIGHTS REFLECTOR TAPE AND MUD FLAPS.
  • 60" X 30- UNDER SCREEN CONVEYOR 20 HP TEFC:
    - 42" SPACING ON CEMA C IDLERS.
    - VULCANIZED LAGGED HEAD PULLEY SELF-CLEANING WING TAIL PULLEY.
    - 3 PLY BELT; VULCANIZED SPLICE
    - SUPERIOR BELT SCRAPER
    - SEW RIGHT ANGLE DRIVE
  • 1/4" PLATE UNDER SCREEN HOPPER WITH WEAR STRIPS & ADJUSTABLE SKIRT BOARD WIPERS.
  • PRODUCT CHUTES:
    - 2ND DECK OVERS:
    BUILT OF 1/4" PLATE W/HEAVY DUTY 9" X 18" RUBBER LINERS IN WEAR AREA (FLOOR). WITH 1/3-2/3 REMOVABLE PANELS TO TAKE PRODUCT TO 3RD DECK CROSS CONVEYOR.
  • 3RD DECK OVERS:
    - BUILT OF 1/4" PLATE W/HEAVY DUTY 9" X18" RUBBER LINERS) IN IMPACT WEAR AREA
    (FLOOR) AND 3/8" AR ON SIDE WEAR AREAS.
  • SCREEN DISCHARGE CHUTE WITH HEADY DUTY 9" X 18" RUBBER LINERS. IN FLOOR AND 3/8" AR ON SIDE OF WEAR AREAS.
  • 30" X 13-6" MINE DUTY CROSS CONVEYOR FOR TOP DECK OVERS:
    - 7.5 HP SEW RIGHT ANGLE DRIVE
    - BUILT IN A FASHION TO ACCEPT CANOE LINERS. (CANOELINERS INCLUDED)
    - 3 PLY BELTING.
    - CLOSE SPACING CEMA C5 RUBBER IMPACT CHANNEL INSERT IDLERS.
    - VULCANIZE SPLICE
    - XTERRA WIPER
  • 30" X 13-6" CROSS CONVEYOR FOR 2ND DECK OVERS:
    - 7.5 HP SEW RIGHT ANGLE DRIVE
    - CEMA C4 STEEL CAN CHANNEL INSET IDLERS AT 30" CENTERS.
    - 3 PLY BELTING
    - DODGE SCM BEARINGS.
    - VULCANIZED SPLICE
    - XTERRA WIPER
  • 30" X 13-6" CROSS CONVEYOR FOR 3RD DECK OVERS:
    - 7.5 HP SEW RIGHT ANGLE DRIVE
    - CEMA C4 STEEL CAN CHANNEL INSET IDLERS AT30" CENTERS.
    - 3 PLY BELTING
    - DODGE SCM BEARINGS.
    - VULCANIZED SPLICE
    - XTERRA WIPER
  • 48" FEED CONVEYOR W/ HEAVY DUTY S-DRIVE WITH ADJUSTABLE FEED HEIGHT:
    - HEAVY DUTY S-DRIVE WITH 16" CERAMIC LAGGED DRIVE PULLEY AND SPECIAL
    HERRINGBONE WINGED BEND PULLEY MOUNTED WITH 2 15/16" DODGE TYPE E PILLOW BLOCK
    BEARINGS.
    - SELF-CLEANING 14" WING TAIL PULLEY WITH DODGE SCM BEARINGS.
    - 14" HEAD PULLEY WITH DODGE SCM BEARINGS.
    - 3 PLY BELT
    - FORMED SKIRT BOARD 1ST 15-.
    - VULCANIZE SPLICE.
    - SUPERIOR XTERRA BELT SCRAPER.
    - CERAMIC HEAD PULLEY
    - HD PPI IMPACT SYSTEM IN LOAD ZONE OF FEED CONVEYOR
    - 25 HP SEW RIGHT ANGLE DRIVE.
  • 20" DIAMOND PLATE FOLD DOWN WALK WAYS BOTH SIDES OF SCREEN 48" BACK PLATFORM TOE BOARDS 42" TUBESTEEL HANDRAILS AND ACCESS LADDER.
  • SAFETY GUARDS SANDBLASTED CHASSIS RUST INHIBITOR PRIMER AND TWO FINISH COATS OF PAINT INCLUDED.
  • OPTIONS INCLUDED:
    HYDRAULIC LIFT AT HEAD END OF FEED CONVEYOR:
    HYDRAULIC LIFT AT TAIL END OF FEED CONVEYOR:
    PIN LOCATIONS AT DIFFERENT LEVELS.
  • PRECISION 16" XT35 CERAMIC HEAD PULLEY VS STD. XT 35 RUBBER LAGGED.
  • 6-LEG FAB TEC PLANT MOUNTED 31K RUN-ON SYSTEM:
    - 12V HYDRAULIC PACKAGE AND SPOOL VALVE~ NUMBER OF BANKS TO MATCH LEG QUANTITY.
    - 4" X 24" CYLINDERS 31 400 LB. CAPACITY (AT 2500 PSI) WITH SAFETY-LOK CIRCUIT.
    - HEAVY DUTY FOOT PADS.
  • SELF CONTAINED HONDA 8 HP HYD. POWER PACKAGE ~VS~ HPX 200 12V:
    ELECTRIC START.
    - 12 GALLONHYDRAULIC RESERVOIR WITH FILTER PROTECTION.
    2 1/2 GPM PUMP.
  • - VULCANIZED SPLICE ON ALL CONVEYORS. (1)60" (1) 42" (3)30"
    - GE STYLE MOUNTING FOR REJECT CONVEYOR.
    - RUBBER DISC RETURNS ~VS~ STEEL CANS.
    - TOOL BOX MOUNTED ON CHASSIS.
    - 3 PLY ~VS~ 2 PLY ON 60" UNDER SCREEN CONVEYER.
    - 3 PLY ~VS~ 2 PLY ON BOTTOM CROSS CONVEYORS.
    - MINE DUTY TAIL PULLY ON FEED CONVEYOR.
    - 3/8" TIE OFF CABLES INSTALLED ON UPPER SECTION OF FEED CONVEYOR ON
    BOTH SIDES AND ON TOP DECK CROSS CONVEYER ON BOTH SIDES.
    - 48" SUPERIOR X-TERRA BELT SCRAPER ON FEED CONVEYOR.
    - 60" SUPERIOR X-TERRA BELT SCRAPER ON UNDER-SCREEN CONVEYOR
    - 48" ~VS~ 42" FEED CONVEYOR:
    - 25 HP SEW RIGHT ANGLE DRIVE.
    - HD PPI IMPACT SYSTEM IN LOAD ZONE OF FEED CONVEYOR
    - LED LIGHTS
    - FABTEC BASE FRAME
  • ELECTRICAL SWITCHGEAR WITH 150FT POWER CORD.
    MAIN BREAKER WITH LOCKABLE OPERATOR
    50 HP FVNR FOR SCREEN
    20 HP FVNR FOR UNDER SCREEN CONVEYOR
    (3) 7.5 HP FVNR FOR CROSS CONVEYORS
    (1) 3 HP FVNR FOR REJECT WITH 20 AMP RECEPTACLE
    (1) 25 HP FVNR FOR OVERHEAD FEED
    (2) 20 HP SPARES WITH 60 AMP HUBBELL RECEPTACLES
    (1) 100 AMP FEED BREAKER WITH 100 AMP HUBBELL RECEPTACLE
    PANEL STAND HOUR METER SAFETY START HORN E-STOP SAFETY PLACARDS.
    PENDANT CORD WITH PUSH BUTTONS. PANEL SETS OFF THE PLANT 30- FOR OPERATION
  • GUARDING - WE DO NOT WARRANT THAT MANUFACTURERS›¼À™ GUARDING WILL MEET ALL LOCAL CODES. IT IS THE RESPONSIBILITY OF THE END USER TO HAVE GUARDING CHECKED BY A LOCAL INSPECTOR PRIOR TO STARTUP OF EQUIPMENT OPERATIONS CORRECTIVE ACTIONS AND ASSOCIATED EXPENSE ARE THE RESPONSIBILITY OF THE END USER.