Photo Count: 8-
Price:
$1,050,000 USD -
Location:
Fargo, North Dakota - (800) 437-2924
Interested in this machine? Send us a message
PriceWatch
Subscribe to be notified of price changes on this item.
2023 Other Screening Plant 6203-T
Fields with asterisks * are required.
Print This Page
Description
TWIN SCREEN PLANT SUPE/FABT
Inventory ID
E00067306
Serial
PT-6-20-3-587-23
Machine Location
Details
- Inventory ID: E00067306
- Status: On Yard
- Make: Other
- Model: 6203-T
- Year: 2023
- Serial#: PT-6-20-3-587-23
Notes
- FABTEC PORTABLE 6- X 20- 3-DECK SUPERIOR GUARDIAN TWIN SCREENING PLANT WITH OVERHEAD FEED CONVEYOR 5-PACK EQUIPPED PER THE BELOW:
- (2) 6- X 20- - 3 DECK SUPERIOR GUARDIAN SCREENS:
- 40 HP 1200 RPM TEFC SCREEN MOTOR
- HUCK BOLTED SCREEN BOX
- ADJUSTABLE OVAL STROKE ANGLE STROKE LENGTH AND SPEED
- SELF-ALIGNING SPHERICAL BEARINGS
- SPLASH TYPE LUBRICATION SYSTEM
- COIL SPRINGS
- (1) LH AND (1) RH DRIVE
- BOTH SCREENS 2.5 DEGREES
- BOTH SCREENS END TENSIONEDBOTTOM DECKS
- 5- CLAMP BARS - (1) INDIVIDUAL 48" X 13-6›¼À CROSS CONVEYOR ON 1ST DECK (4) 30" X 13-6›¼À CROSS
CONVEYORS FOR 2ND AND 3RD DECKS 7.5 HP (RIGHT ANGLE DRIVE):
- VULCANIZED LAGGED HEAD PULLEYS SELF-CLEANING WING TAIL PULLEYS
- DODGE SCM BEARINGS
- 7.5HP SEW RIGHT ANGLE DRIVES
- 24" SPACING ON CEMA B4 CHANNEL INSET 20 DEGREE IDLERS FOR 30"
CONVEYORS
- TOP CROSS CONVEYOR BUILT WITH CANOE LINERS FLASHING ~VS~ STANDARD FLASHING
- (6) EXTRA C5-20CIT-48SB CEMA C5 RUBBER IMPACT IDLERS FOR 48" TOP CONVEYOR
- FULL LENGTH FORMED SKIRT BOARDS
- MOUNTED ON SLIDER FRAMES WITH HOLD-DOWNS AND CAN BE REVERSED
- 3-PLY 1/4" COVER BELT FOR 30" CONVEYORS AND 3 PLY ›¼¼ COVER BELT FOR 48" TOP
CONVEYOR
- ALL WITH VULCANIZED SPLICES
- ORANGE GUM RUBBER FLASHING ON LOWER (4) CROSS CONVEYORS
- STD FABTEC COMBI WIPERS - CROSS CONVEYOR CONFIGURATION - NEW FROM FACTORY SET UP:
- TOP OUT THE PASSENGER SIDE
- MIDDLE TWO OUT THE PASSENGER SIDE
- BOTTOM TWO OUT THE DRIVERS SIDE - (2) 60" UNDER SCREEN CONVEYORS RUN OPPOSITE OR RUN TOGETHER:
- 15 HP SEW RIGHT ANGLE DRIVES DODGE SCM BEARINGS 2-15/16 SHAFTS
- 3-PLY BELT 1/4" COVER VULCANIZED SPLICES
- 32" SPACING ON CEMA C IDLERS
- UNDER SCREEN HOPPERS WITH WEAR STRIPS AND ADJUSTABLE SKIRT BOARD
WIPERS
- VULCANIZED LAGGED HEAD PULLEYS AND SELF-CLEANING WING TAIL
PULLEYS
- FULL LENGTH FORMED SKIRT BOARDS
- ORANGE GUM RUBBER FLASHING
- 60" NAVIGATOR ROLLERS ON (2) UNDERSCREEN BELTS
- 60" SUPERIOR X-TERRA BELT SCRAPER - QTY (3) ON UNDERSCREEN CONVEYORS
36" X 46- OVER HEAD FEED CONVEYOR 15 HP TEFC:
- SEW RIGHT ANGLE SHAFT MOUNT REDUCER
- DODGE SCM BEARINGS AND TYPE E BEARING ON HEAD END
- 3-PLY BELT 1/4" COVER; CEMA C CHANNEL INSET IDLERS
- VULCANIZED LAGGED HEAD PULLEY & WING TAIL PULLEY
- FORMED SKIRT BOARD FULL LENGTH
- HYDRAULIC RAISE AND LOWER OF FEED CONVEYOR
- LIGHTER MANUALLY REMOVED 2 PIECE STYLE SPLITTER BOX WITH EXTENSIONS
- CANOE LINER SKIRTING IN FEED HOPPER OF OVERHEAD
- V-PLOW ON RETURN SIDE
- ELEVATED 20" FOLD DOWN WALKWAYS WITH DIAMOND PLATE FLOOR BOTH SIDES OF SCREENS
AND BACK PLATFORMS 42" TUBE STEEL HANDRAILS AND ACCESS LADDERS
WALKWAYS RAISED 18›¼À ON EACH SIDE OF SCREENS
- BACK PLATFORM WILL REMAIN AT NORMAL LOWER POSITION
- TOE BOARD ON BOTH SIDES OF WALKWAYS
- REQUIRES ADDITIONAL SUPPORTS & BRACKETS
- INCLUDES STEPS BETWEEN WALKWAYS AND REAR PLATFORM
- EXTRA LOWER PLATFORMS AT SCREEN GEAR BOX FOR SCREEN MAINTENANCE
- ADDITIONAL BELT GUARDING FOR FEED CONVEYOR. (PVC CURTAIN MOUNTED ON CONVEYOR)
- WALKWAYS FOLD FOR SHIPPING - -1/4" PLATE UNDER SCREEN HOPPER WITH WEAR STRIPS & ADJUSTABLE SKIRT BOARD
WIPERS
- AR LINED PRODUCT DISCHARGE CHUTES TO DISCHARGE ONTO PRODUCT CROSS CONVEYORS
- 1/3 - 2/3 -PANEL STYLE BLENDING FOR 2ND TO 3RD DECK - 4 AXLE CARRIER DROP CENTER STYLE (TANDEM / TANDEM):
- 24" WF 68# BEAMS
- RIDE-WELL AIR RIDE SUSPENSION
- 25 000 # AXLES. MAX AIR BAG STOPS
- AIR BRAKES BRAKE LIGHTS MARKER LIGHTS REFLECTIVE TAPE AND MUD
FLAPS
- LED AND STROBE LIGHTS
- GROUNDSUPPORT STANDS
- FRONT TOW HOOKS
- TRAIL KING 9FT BOOSTER CONNECTION POINT WITH AIR AND ELECTRICAL (NO BOOSTER) - - SAFETY GUARDS SANDBLASTED CHASSIS RUST INHIBITOR PRIMER AND TWO FINISH
COATS OF PAINT INCLUDED: PAINTED RAL 7024 GRAPHITE GRAY. - OPTIONS INCLUDED:
- FABTEC 70K 6 LEG RUN-ON SYSTEM KIT:
- 12V HYDRAULIC PACKAGE AND SPOOL VALVE~ NUMBER OF BANKS TO MATCH LEG QUANTITY.
- 18" STROKE CYLINDERS 70 000 LB. CAPACITY (AT 2500 PSI) WITH SAFETY-LOK
CIRCUIT
- HEAVY DUTY FOOT PADS - (2) - FAB TEC 48K RUN-ON LEG KIT WITH SWIVEL MOUNTS ON FRONT OF CHASSIS:
- 5 X 24" CYLINDERS 48 000 LB CAPACITY (AT 2500 PSI) WITH SAFETY-LOK CIRCUIT.
- 24›¼À STROKE
- SWIVEL MOUNTING PLATE
- CYLINDER MOUNTING HARDWARE
- HEAVY DUTY FOOT PADS
- HYDRAULIC CYLINDER FOR SWIVEL UP AND DOWN OF LEG
- WORKS WITH 70K RUN ON LEG KIT - SELF CONTAINED HONDA 8 HP HYD. POWER PACKAGE ~VS~ HPX 200 12V:
- ELECTRIC START
- 12 GALLON HYDRAULIC RESERVOIR WITH FILTER PROTECTION
- 2 1/2 GPM PUMP
- (2) TOOL BOX MOUNTED ON CHASSIS
- SLIDE IN REJECT CONVEYOR CAPABILITY OVER AXLE SCREEN
- RUBBER DISC RETURNS ON ALL CONVEYORS ~VS~ STEEL CANS
- REMOTE GREASE LINES FOR UNDER SCREENS TAIL PULLEY BEARINGS
- SAFETY TIE-OFF CABLES -STAND ALONE- BOTH SIDES OF BOTH SCREENS - - GUARDING - WE DO NOT WARRANT THAT MANUFACTURERS›¼À™ GUARDING WILL MEET ALL LOCAL
CODES. IT IS THE RESPONSIBILITY OF THE END USER TO HAVE GUARDING CHECKED BY A
LOCAL INSPECTOR PRIOR TO STARTUP OF EQUIPMENT OPERATIONS CORRECTIVE ACTIONS
AND ASSOCIATED EXPENSE ARE THE RESPONSIBILITY OF THE END USER.