2019 Generac MTP6DZV Pump For Sale » General Equipment & Supplies, Inc. ND, SD, MN, IA

2019 Generac MTP6DZV Pump For Sale

2019 Generac MTP6DZV Pump For Sale
  • Description
  • 6" DRY PRIME PUMP ON TRAILER
  • Hours
  • 0.3
  • Inventory ID
  • E00056320
  • Serial
  • 7FSBP1314KB552458
(800) 437-2924
General Equipment & Supplies, Inc.

Equipment is on rent
Contact your Salesperson for more information

Details

  • Inventory ID: E00056320
  • Status: On Rent
  • Make: Generac
  • Model: MTP6DZV
  • Year: 2019
  • Serial#: 7FSBP1314KB552458

Equipment Text

  • 2019 MTP6DZV 6" DRY PUMP EQUIPPED WITH:
  • ENGINE
  • - DEUTZ TD 2.9 L4 ›œV WATER-COOLED TURBO-CHARGED DIESEL ENGINE O 75 HP @ 2600
  • RPM
  • - 4 CYLINDER
  • - 2.9 LITER DISPLACEMENT
  • - DOC ONLY FOR EXHAUST AFTER TREATMENT
  • - EPA FINAL TIER 4 APPROVED STEEL SINGLE WALL FUEL TANK **113 GAL. (428 L)
  • CAPACITY / 100 GAL. (379 L) USABLE
  • - FUEL CONSUMPTION AT PRIME: 100% - 3.60 GPH (13.6 LPH)
  • - COOLING SYSTEM CAPABLE OF OPERATING AT 120ºF (49ºC) AMBIENT
  • - DISPOSABLE AIRFILTER ›œV PAPER ELEMENT
  • - 950 CCA WET CELL BATTERY
  • - 95 AMP ALTERNATOR
  • - LOW COOLANT WARNING/SHUTDOWN
  • PUMP
  • - CORNELL 6NNT; VENTURI DRY PRIME CENTRIFUGAL PUMP
  • - BENDIX COMPRESSOR FLOW UP TO 13.2 CFM
  • - 6 IN. NPTF ›œV SUCTION & DISCHARGE CONNECTION
  • - CAST IRON ASTM A48 CLASS 30 PUMP CASING
  • - CAST IRON ASTM A48 CLASS 30 IMPELLER
  • - 2 VANE ENCLOSED IMPELLER
  • - IMPELLER DESIGN INCORPORATED WITH DEFLECTOR VANES AND PUMPOUT VANES
  • - SINGLE MECHANICAL SEAL JOHN CRANE TYPE 1 & 2 WITH TUNGSTEN CARBIDE VS
  • - SILICON CARBIDE FACES
  • - REPLACEABLE WEAR RING
  • - RUN-DRY SYSTEM FOR CONTINUOUS OPERATIONS WITHOUT NEED FOR EXTERNAL FLUSH
  • WATER OR VENTING
  • - PUMP SHAFT - 1144 STRESS PROOF STEEL
  • PUMP PERFORMANCE
  • - PUMP OUTPUT ›œV 2750 GPM (10409 LPM)
  • - LIFT SUCTION ›œV 28 FT. (8.5 M)
  • - MAXIMUM DIAMETER OF SOLIDS ›œV 3 IN. (76.2 MM)
  • - IMPELLER DIAMETER: 10.09 IN. (25.63 CM)
  • - MAXIMUM EFFICIENCY (BEP PERCENT) ›œV 80% BEP FLOW; 1900 GPM (7192 LPM)
  • - TOTAL DYNAMIC HEAD ›œV 150 FT. (45.72 M)
  • - INTAKE/DISCHARGE HEIGHT ›œV 30 IN. (0.76M)
  • - DUTY POINTS: O 1400 GPM (5300 LPM) @ 69.8 FT. (21.3 M) TDH @ 1800 RPM 80%
  • EFFICIENCY NPSHR 8.2 FT. (2.5 M)
  • - 2000 GPM (7571 LPM) @ 72.8 FT. (22.2 M) TDH @ 2000 RPM 80% EFFICIENCY NPSHR
  • 15.2 FT. (4.6 M)
  • SYSTEM CONTROLS
  • - WHITE LED LIGHTING CONTROL PANEL LIGHTING
  • - STANDARD CONTROLLER ›œV LOFA CP750 O LARGE BACKLIT 4.3 IN. (109 MM) LCD
  • - DISPLAY **DISPLAYS ENGINE TEMP ENGINE SPEED FUEL LEVEL ENGINE HRS.
  • COOLANT TEMP AND OIL PRESSURE
  • - ADVANCED AUTOMATIC START/STOP CONTROL FOR USE WITH TWO-SWITCH INPUTS AND 4-
  • 20MA TRANSDUCER
  • - CONFIGURABLE HIGH AND LOW SET POINTS CONTROL START/STOP OPERATION
  • - ALARM OUTPUT TO SIGNAL START WARNING OR SHUTDOWN CONDITIONS
  • - HEAVY-DUTY IP64 WATER-RESISTANT KEY SWITCH WITH BOOTED KEY
  • - RS485 SERIAL INTERFACE FOR AUXILIARY EQUIPMENT
  • - ELECTRONIC E-STOP WITH RED LED ENGAGEMENT INDICATOR LIGHT
  • TRAILER
  • - FLIP-TONGUE DESIGN
  • - BOLT-ON REPLACEABLE FRONT TONGUE MOUNTING PLATE
  • - DOT APPROVED LED TAIL SIDE BRAKE AND DIRECTIONAL LIGHTS
  • - (4) TRANSPORTATION TIE DOWNS CAPABLE OF HANDLING 3 IN. ( 76.2 MM) TRAILER
  • STRAPS
  • - SAFETY CHAINS WITH SPRING LOADED SAFETY HOOKS
  • - 2 IN. (50.8 MM) ADJUSTABLE BALL HITCH
  • - 6000 LB. (2722 KG) TORSION AXLE WITH SURGE BRAKES
  • - 2000 LB. (907 KG) TONGUE JACK WITH FOOTPLATE
  • - (2) 2000 LB. (907 KG) TOP WIND JACKS WITH OPTION TO ADD UP TO (4)
  • - ST225/75R15 TUBELESS TIRES ›œV 8 PLY
  • - UV & FADE RESISTANT HIGH TEMPERATURE CURED BLACK POLYESTER POWER PAINT
  • - CENTRAL LIFTING POINT
  • - DOCUMENT HOLDER WITH OPERATING MANUAL INCLUDING THE AC/DC WIRING DIAGRAMS
  • WEIGHT & DIMENSIONS
  • - TRAILER MOUNTED
  • - DRY WEIGHT: 3 841 LBS. (1 742 KG)
  • - OPERATING WEIGHT: 4 655 LBS. (2 111 KG)
  • - DIMENSIONS: 150.12 X 75.00 X 73.88 IN. (3.81 X 1.91 X 1.88 M)
  • SKID MOUNT
  • - DRY WEIGHT: 3 221 LBS. (1 461 KG)
  • - OPERATING WEIGHT: 4 035 LBS. (1 830 KG)
  • - DIMENSIONS: 91.16 X 66.60 X 61.50 IN. (2.32 X 1.91X 1.88 M)

Make An Offer

INTERESTED IN THIS MACHINE? SEND US A MESSAGE.

Fields with asterisks* are required.

Send to a Friend

Fields with asterisks* are required.