2019 Canica CRV2000 Crusher - Impact For Sale » General Equipment & Supplies, Inc. ND, SD, MN, IA

2019 Canica CRV2000 Crusher - Impact For Sale

  • Price
  • $447,500 USD
  • Description
  • IMPACTOR CRUSHING PLANT
  • Hours
  • 325.3
  • Inventory ID
  • E00055196
  • Serial
  • TRX2000VJOKKC1255
(800) 437-2924
Machine Location:
View Google Map
General Equipment & Supplies, Inc.
4600 Valley Industrial Blvd S
Shakopee, Minnesota 55379

Details

  • Inventory ID: E00055196
  • Status: On Yard
  • Make: Canica
  • Model: CRV2000
  • Year: 2019
  • Serial#: TRX2000VJOKKC1255

Equipment Text

  • CANICA CRV2000 IMPACTOR CRUSHING PLANT EQUIPPED AS PER BELOW:
  • - TEREX CANICA 2000 VERTICAL SHAFT IMPACTOR WITH AUXILIARY
  • ELECTRICAL CONTROL CABINET WITH RPM GUAGE VIBRATION DETECTOR
  • (WARNING) LIGHT HOUR METER OPEN-LID CRUSHERSAFETY CUT-OFF 2 HP
  • LUBE SYSTEM STARTER OIL SYSTEM HEATER STARTER AND 15 HP SPARE
  • STARTER. CONTAINS TERMINATION POINTS FOR ALL SAFETY SHUT-OFF
  • SWITCHES.
  • - PANTENTED "HYDRALID" HYDRAULIC LID LIFTER & MODULAR OIL LUBE
  • SYSTEM
  • - 48" (1219MM) WIDE COVERED PRODUCT CONVEYOR AND HOOD WITH 15 HP (11
  • KW) ELECTRIC MOTOR
  • - EXTERNALLY ADJUSTABLE FEED TUBE SYSTEM FEED HOPPER WITH BANG
  • BOARD
  • - SERVICE PLATFORMS AROUND CRUSHER WITH INCLINED ACCESS LADDER TO
  • GROUND
  • - EASY MAINTENANCE FEATURES; REMOTE GREASE LINES GROUND ACCESS
  • CONE LUBRICATION MODULE
  • - EMERGENCY STOP BUTTONS ON BOTH SIDES OF THE FRAME
  • - TANDEM AXLE SPRING SUSPENSION WITH EIGHT (8) 295/75 R22.5 TIRES
  • - 48" (1219MM) LONG LOCKABLE SIDE-MOUNTED STORAGE BOX
  • - 2000 HEAVY DUTY SAND (HDS) VSI SINGLE DRIVE WITH OPEN TABLE AND
  • ANVILS - UP TO 250 STPH FEED RATE AND UP TO 1" (25MM) FEED SIZE
  • - 460 VOLT 3 PHASE 60 HERTZ
  • - 300 HP 1200 RPM 460/60 HERTZ SINGLE DRIVE ELECTRIC MOTOR
  • - SET OF FOUR (4) 6" X 24" STROKE DUAL PINNED HYDRAULIC RUN-ON JACKS
  • AND GAS POWER
  • - PAINTED GRAPHITE GRAY (RAL 7024) WITH SAFETY YELLOW HANDRAILS
  • LADDERS AND GUARDING
  • - AES ELECTRICAL SWITCHGEAR PANEL EQUIPPED AS PER BELOW:
  • - 60X60 NEMA 3R/4 ENCLOSURE
  • - DRIP SHIELD CORD CAGE
  • - MANUALLY OPERATED SAFETY START UP ALARM
  • - 800 AMP MAIN CIRCUIT BREAKER WITH LOCKABLE OPERATOR - ADJUSTED TO
  • 700 AMPS
  • - IMPACTOR AMP METER AND HOUR METER
  • -PLANT HZ METER
  • - PLANT VOLT METER
  • - ACS880 ABB BRAND VFD
  • - POTENTIOMETER FOR SPEED CONTROL
  • - 900 CFM HEAT EXCHANGER ON A SWITCH
  • - CONTROL BUTTONS IN THE DOOR
  • - 25 HP FEED CONVEYOR NEMA/IEC RATED SIZE 2 STARTER - 60 AMP
  • RECEPTACLE AND PLUG - INTERLOCKED
  • - 20 HP SPARE 1 CONVEYOR - SIZE 2 STARTER - 60 AMP RECEPTACLE AND PLUG
  • - 20 HP SPARE 2 CONVEYOR - SIZE 2 STARTER - 60 AMP RECEPTACLE AND PLUG
  • - 20 HP SPARE 3 CONVEYOR - SIZE 2 STARTER - 60 AMP RECEPTACLE AND PLUG
  • - 5 KVA TRANSFORMER WITH (1) 120 VAC 20 AMP GFCI DUPLEX -
  • WEATHERPROOF
  • - 60 AMP FEED BREAKER FOR CANICA POWER PANEL
  • - VIBRATION SWITCH AND WIRING
  • - VIBRATION INDICATOR LIGHT
  • - HOUR METER
  • - RPM GUAGE
  • - LUBE STARTER AND CONTROLS
  • - UNDER CRUSHER STARTER AND CONTROLS
  • - 100- OF POWER CORD CONSISTING OF (2) PARALLEL RUNS OF 4/0 TYPE W PER
  • PHASE QTY. (1) 4/0 TYPE W GROUND
  • - SG PANEL SETS OFF THE GROUND 30- FOR OPERATION
  • - GUARDING - WE DO NOT WARRANT THATOUR GUARDS WILL MEET ALL
  • LOCAL CODES.IT IS THE RESPONSIBILITY OF THE END USER TO HAVE THEM
  • CHECKED BY A LOCAL INSPECTOR
  • S/N# OF CANICA CRUSHER 2000188-19

Make An Offer

INTERESTED IN THIS MACHINE? SEND US A MESSAGE.

Fields with asterisks* are required.

Send to a Friend

Fields with asterisks* are required.