Photo Count: 4-
Price:
$1,608,750 USD -
Location:
Shakopee, Minnesota - (800) 437-2924
Interested in this machine? Send us a message
PriceWatch
Subscribe to be notified of price changes on this item.
2024 Other Crusher - Cone 1313
Fields with asterisks * are required.
Print This Page
Description
JCI/FABT CONE PLANT
Inventory ID
E00069709
Serial
PCS-4-536-24
Machine Location
Details
- Inventory ID: E00069709
- Status: On Yard
- Make: Other
- Model: 1313
- Year: 2024
- Serial#: PCS-4-536-24
Notes
- FABTEC 1313 STYLE PORTABLE CLOSE CIRCUIT PLANT WITH 300HP CONE AND 720 3 DECK SCREEN EQUIPPED PER THE BELOW:
- - 7- X 20- - 3 DECK SCREEN 50 HP 1200 TEFC
- JCI K350+ 300 HP ROLLER CONE:
- PROVISIONS FOR MOUNTING LUBE PACKAGE
- 300 HP 1200 RPM TEFC CRUSHER DUTY MOTOR
- JCI 7203 3 DECK SCREEN
›¼À“ RIGHT HAND DRIVE
- END TENSION BOTTOM DECK
- COIL SPRINGS
- 4›¼À™ PANELS
- GENERAL CUSTOM LP REVERSED JACKSHAFT COGGED BELT CONE DRIVE WITH PARAFLEX
COUPLING - MODULAR
- 4 AXLE CARRIER (TANDEM ›¼À“ TANDEM)
- 24" WF 76# BEAMS
- RIDE WELL AIR RIDE SUSPENSION
- 25K AXLES 10›¼À™ WIDE TANDEM-TANDEM STYLE
- 22 500# STANDARD FORGE AXLES 11:00R X 22.5 TIRES
- SIX GROUND SUPPORT STANDS WITH JACKING PADS
- AIR BRAKES
- LED BRAKE LIGHTS
- LED MARKER LIGHTS
- LED STROBE LIGHT
- REFLECTIVE TAPE AND MUD FLAPS
- FRONT FOLD-DOWN LEGS
- FRONT TOW HOOKS
- SWITCH GEAR MOUNTING PROVISIONS ON SIDE OF CHASSIS
- HEAVY DUTY CONE MOUNT WITH AR LINED DISCHARGE HOPPER WITH ADJUSTABLE SKIRT
BOARD WIPERS & MAINTENANCE DOOR FOR INSPECTION AND CLEAN-OUT
- CONE FEED RING WITH EXPANDED METAL WINDOWS
- DESIGNED WITH HOLD-DOWN BRACKETS FOR CONE ADJUSTMENT - 42" UNDER CONE CONVEYOR:
-SEW KA87 15 HP RIGHT ANGLE DRIVE
- 12" C/C ON IDLERS UNDER CONE THEN 36" C/C ON CEMA C SEALED IDLERS
- DODGE SCM BEARINGS
- VULCANIZED LAGGED HEAD PULLEY SELF-CLEANING WING TAIL PULLEY
- EXTENDED SKIRT BOARD FULL LENGTH OF UNDER CONECONVEYOR
- SKIRTBOARD WIPE FIRST 15›¼À™
- 3-PLY 1/4›¼À COVER BELT WITH VULCANIZED SPLICE
- ORANGE GUM RUBBER FLASHING
- RUBBER DISC RETURNS
- HYDRAULIC RAISE AND LOWERING HINGED LOWER SECTION OF UNDER CONE CONVEYOR FOR
MAINTENANCE - 36" X 10- REAR TRANSFER CONVEYOR:
- SEW KA77 5 HP RIGHT ANGLE DRIVE
- INCLUDES TYPE ›¼ÀœE›¼À BEARINGS ON HEAD PULLEY
- DODGE SCM BEARINGS ON TELO TAKE-UPS
- 18" SPACING ON CHANNEL INSET IDLERS
- FULL LENGTH FORMED SKIRT BOARD WITH ADJUSTABLE WIPERS
- 3-PLY 3X1 BELT WITH VULCANIZED SPLICE
- ORANGE GUM RUBBER FLASHING
- RUBBER DISC RETURNS
- HYDRAULIC SLIDE OF REAR TRANSFER CONVEYOR
- (2) REVERSIBLE 18" X 12- FAB TEC SPECIAL DESIGNED PRODUCT CROSS CONVEYOR WITH
5 HP SEW RIGHT ANGLE DRIVES
- FULL LENGTH FORMED SKIRT BOARD
- VULCANIZED LAGGED HEAD PULLEY AND SELF-CLEANING WING TAIL PULLEY
- CHANNEL INSET IDLERS
- 2-PLY 3X1 BELT WITH VULCANIZED SPLICE
- ORANGE GUM RUBBER FLASHING
- RUBBERDISC RETURNS
- MOUNTED ON SLIDERS - 42" OVERHEAD FEED CONVEYOR WITH 25 HP HEAVY DUTY S-DRIVE:
- HEAVY DUTY S-DRIVE WITH 16›¼À LAGGED DRIVE PULLEY AND WINGED BEND PULLEY MOUNTED
WITH 2 15/16›¼À DODGE TYPE E PILLOW BLOCK BEARINGS
-SELF-CLEANING 14›¼À WING TAIL PULLEY WITH DODGE SCM BEARINGS
- 14›¼À HEAD PULLEY WITH DODGE SCM BEARINGS
- NEW FAB TEC HEAVY DUTY STYLE IMPACT AREA ~VS~ IMPACT IDLERS OF FEED CONVEYOR
- IMPACT BARS ON THE SIDE AND IMPACT ROLLERS IN THE CENTER
- INCLUDES ADDITIONAL IMPACT IDLER WHERE TRANSFER CONVEYOR FEEDS ONTO FEED
CONVEYOR
- FORMED SKIRT BOARD 1ST 15-
- 3-PLY BELT WITH VULCANIZED SPLICE
- ORANGE GUM RUBBER FLASHING
- RUBBER DISC RETURNS
- HYDRAULIC FEED CONVEYOR LIFT & LOWER
- HYDRAULIC FEED CONVEYOR SLIDE OVER SECTION FOR EASE IN CONE MAINTENANCE
- CERAMIC LAGGED DRIVE PULLEY
- TIE OFF CABLES INSTALLED ON UPPER SECTION OF FEED CONVEYOR ON BOTH SIDES OF
FEED CONVEYOR
- SCREEN FEEDING1ST AND 2ND DECK INTO CONE WITH OPTION OF 2ND DECK DISCHARGING
INTO PRODUCT CHUTE OR OPTIONAL CROSS CONVEYOR
- 1/4" PL UNDER SCREEN COLLECTION HOPPER WITH ADJUSTABLE SKIRT BOARD WIPERS
ACCESS PANEL AT THE REAR OF THE UNDER-SCREEN HOPPER FOR CLEANOUT. - 60" X 24- UNDER SCREEN CONVEYOR:
- SEW KA87 15 HP RIGHT ANGLE DRIVE
- INCLUDES TYPE ›¼ÀœE›¼À BEARINGS ON HEAD PULLEY
- 3 PLY BELT 36" SPACING ON CEMA C PRECISION IDLERS
- VULCANIZED LAGGED HEAD PULLEY SELF-CLEANING WING TAIL PULLEY
- DODGE SCM BEARINGS: 2 15/16 HEAD & 2 7/16›¼À TAIL
- RUBBER DISC RETURNS
- VULCANIZED SPLICE
- 60›¼À SUPERIOR X-TERRA BELT SCRAPER
- 20" FOLD DOWN WALKWAYS BOTH SIDES OF SCREEN & 48" BACK PLATFORM WITH DIAMOND-
PLATE FLOOR 42" TUBE STEEL HANDRAILS & ACCESS LADDER WALKWAYS RAISED 18›¼À ON
EACH SIDE OF SCREEN
- BACK PLATFORM WILL REMAIN AT NORMAL LOWER POSITION
- TOE BOARD ON BOTH SIDES OF WALKWAYS
- REQUIRES ADDITIONAL SUPPORTS & BRACKETS
- INCLUDES STEPS BETWEEN WALKWAYS AND REAR PLATFORM
- EXTRA LOWER PLATFORMS AT SCREEN GEAR BOX FOR SCREEN MAINTENANCE
- ADDITIONAL BELT GUARDING FOR FEED CONVEYOR
- ADDITIONAL LADDER AND LADDER OPENING ON SCREEN SUBFRAME
- OPPOSITE SIDES
- INCLUDES ADDITIONAL GUARD DOG GATE
- WALKWAYS BOTH SIDE OF CONE WITH LADDER
- SELF CLOSING SAFETY GATES AT ALL LADDER OPENINGS - PROVISION FOR SLIDE-IN REJECT CONVEYOR:
- SIMPLE FLAT BAR STYLE
- CONVEYOR NOT INCLUDED - 6-LEG FAB TEC 70K RUN-ON SYSTEM KIT:
- 18›¼À STROKE CYLINDERS 70 000 LB. CAPACITY (AT 2500 PSI) WITH SAFETY-LOK
CIRCUIT
- (1) SPOOL VALVE~ NUMBER OF BANKS TO MATCH LEG QUANTITY
- CYLINDER MOUNTING PLATES & HARDWARE
- HEAVY DUTY FOOTPADS
- (2) - FAB TEC 48K RUN-ON LEG KIT WITH SWIVEL MOUNTS ON FRONT OF CHASSIS
- 5 X 24" CYLINDERS 48 000 LB CAPACITY (AT 2500 PSI) WITH SAFETY-LOK CIRCUIT
- 24›¼À STROKE
- SWIVEL MOUNTING PLATE
- CYLINDER MOUNTING HARDWARE
- HEAVY DUTY FOOT PADS
- HYDRAULIC CYLINDER FOR SWIVEL UP AND DOWN OF LEG
- WORKS WITH 70K RUN ON LEG KIT - SELF CONTAINED HONDA 8 HP HYD. POWER PACKAGE ~VS~ HPX 200 12V:
- ELECTRIC START
- 12 GALLON HYDRAULIC RESERVOIR WITH FILTER PROTECTION
- 2 1/2 GPM PUMP - - SAFETY GUARDS SAND BLASTED CHASSIS RUST INHIBITOR PRIMER AND TWO FINISH
COATS OF PAINT INCLUDED. - - GUARDING - WE DO NOT WARRANT THAT MANUFACTURERS›¼À™ GUARDING WILL MEET ALL LOCAL
CODES. IT IS THE RESPONSIBILITY OF THE END USER TO HAVE GUARDING CHECKED BY A
LOCAL INSPECTOR PRIOR TO STARTUP OF EQUIPMENT OPERATIONS CORRECTIVE ACTIONS
AND ASSOCIATED EXPENSE ARE THE RESPONSIBILITY OF THE END USER.