2018 Superior 7203-38 Screening Plant For Sale » General Equipment & Supplies, Inc. ND, SD, MN, IA

2018 Superior 7203-38 Screening Plant For Sale

  • Description
  • SUPERIOR SCREEN PLANT
  • Hours
  • 795
  • Inventory ID
  • E00052111
  • Serial
  • 1197132
(800) 437-2924
General Equipment & Supplies, Inc.

Equipment is on rent
Contact your Salesperson for more information

Details

  • Inventory ID: E00052111
  • Status: On Rent
  • Class: Used
  • Make: Superior
  • Model: 7203-38
  • Year: 2018
  • Serial#: 1197132

Equipment Text

  • SUPERIOR 7X20 3D SCREEN PLANT EQUIPPED AS DESCRIBED BELOW:

    CARRIER CHASSIS:
    - MAIN FRAME CONSTRUCTED OF WIDE FLANGE STRUCTURAL STEEL BEAMS
    - TANDEM AXLE WITH (8) 11X22.5 RADIAL TIRES
    - COMPLETE AIR BRAKE SYSTEM
    - MUDFLAPS ON REAR AXLE
    - TRAVEL LIGHTS WITH BRAKE AND DIRECTIONAL SIGNALS
    - FIFTH WHEEL HITCH
    - (4) FIXED STRUCTURAL STEEL CRIBBING LEGS
    - GREASE PACKAGE - CONSISTING OF 1-2 LOCATIONS TO GREASE ENTIRE PLANT
  • SUPERIOR GUARDIAN HORIZONTAL 7203-TH38 SCREEN EQUIPPED AS PER BELOW:
    UNIT SPECIFICATIONS:
    - SCREEN SIZE: 7- X 20- THREE DECK TRIPLE SHAFT HORIZONTAL SCREEN
    - SLOPE ANGLE: SET AT TRUE HORIZONTAL (0 DEGREES)
    - MOVEMENT: HIGH G-FORCE SCREEN WITH ADJUSTABLE SPEED AND STROKE
    - BEARINGS: 190MM SPHERICAL ROLLER BEARINGS WITH 38 GEARS
    - SPRINGS: STANDARD COIL SPRINGS
    - VS2: START UP AND SHUTDOWN SUPPRESSION SYSTEM
    - DRIVE: RIGHT HAND DRIVE (STANDARD)
    - MOTOR BASE: SLIDE ADJUSTMENT MOTOR BASE (LESS MOTOR)
    - BOLTS: HUCK BOLTED BODY
    - DISCHARGE LIPS: 4" DISCHARGE LIPS WITH 1/4" AR LINERS
    - FEEDBOX: 24" FEEDBOX WITH 1/4" AR LINERS
    - INSPECTION PORTS: BOLT-ON INSPECTION PORTS AND SPRAY HOLE KNOCKOUTS
    - GUARDING: EASY ACCESS GUARD FOR V-BELTDRIVE WITH BUILT IN TENSIONER
    - SKIDPLATES: 5/16" SIDEPLATE CONSTRUCTION WITH 1/4" REINFORCING PLATES
    ADDITIONAL SPECIFICATION:
    - ELECTRIC MOTOR: NOT INCLUDED
    - PAINT: STANDARD SUPERIOR PAINT - WINDOW GRAY (RAL 7040) FOR SCREEN GRAPHITE
    GRAY (RAL 7024) FOR BASE FRAME MOTOR BASE
    - VOLTAGE: 460V 3 PHASE 60 HZ
    - BASE FRAME: BASEFRAME NOT INCLUDED
    - SHAFT HOUSING PROTECTION: STANDARD MILD STEEL PROTECTION CLAMPED TO SHAFT
    HOUSING
    - SPRAY SYSTEM: NOT INCLUDED
    TOP DECK SPECIFICATIONS:
    - TOP DECK: SINGLE CROWN DECK TO ACCOMMODATE 4- WIRE CLOTH MEDIA SECTIONS 3/8"
    THICK LONGITUDINAL BARS
    - SCREEN MEDIA: MEDIA NOT INCLUDED
    - DECK CROWN: STANDARD SINGLE CROWN DECK
    - TAKE UP: STANDARD TAKE UPRAILS
    - CROSS MEMBER PROTECTORS: CROSS MEMBER PROTECTION NOT INCLUDED
    MIDDLE DECK SPECIFICATIONS:
    - MIDDLE DECK: SINGLE CROWN DECK TO ACCOMMODATE 4- WIRE CLOTH MEDIA SECTIONS
    3/8" THICK LONGITUDINAL BARS
    - SCREEN MEDIA: MEDIA NOTINCLUDED
    - DECK CROWN: STANDARD SINGLE CROWN DECK
    - TAKE UP: STANDARD TAKE UP RAILS
    BOTTOM DECK SPECIFICATIONS:
    MIDDLE DECK SPECIFICATIONS:
    - MIDDLE DECK: SINGLE CROWN DECK TO ACCOMMODATE 4- WIRE CLOTH MEDIA SECTIONS
    3/8" THICK LONGITUDINAL BARS
    - SCREEN MEDIA: MEDIA NOT INCLUDED
    - DECK CROWN: STANDARD SINGLE CROWN DECK
    - TAKE UP: STANDARD TAKE UP RAILS
  • ROLL AWAY SCREEN DISCHARGE CHUTES AND BLENDING GATES:
    - ROLLERS MOUNTED UNDER CHUTE SUPPORT STRUCTURE
    - CONSTRUCTED OF 1/4" MILD STEEL WITH 1/4" AR400 LINER
    - DESIGNED TO MOVE DISCHARGE CHUTES AWAY FROM THE SCREEN
    - ALLOWS FOR ACCESS TO THE FRONT OF SCREEN FOR MAINTENANCE
    - (4) FLOP GATES IN EACH CHUTE; EACH GATE MANUALLY OPERATED BY A
    LEVER OUTSIDE THEIR RESPECTIVE CHUTE
    - CONSTRUCTED OF 1/4" MILD STEEL WITH 1/4" AR LINERS
    - TOP DECK CHUTE DISCHARGES OVER THE KINGPIN END OF THE CHASSIS OR
    ONTO MIDDLE DECK CROSS CONVEYOR 25% BLENDING GATES:
    - MIDDLE DECK CHUTE DISCHARGES ONTO MIDDLE OR BOTTOM DECK CROSS
    CONVEYOR 25% BLENDING GATES
    - BOTTOM DECK CHUTES DISCHARGES ONTO BOTTOM OR "BLENDS UP" TO
    MIDDLE DECK CROSS CONVEYOR 25% BLENDING GATES
    - AR LINERS ON BOTH SIDES OF BLENDING GATES
    FINES HOPPER:
    - 1/4" AR PLATE STEEL SIDES
    - ADJUSTABLE RUBBER FLASHING FULL LENGTH
    2) 30" WIDE X 12- LONG REVERSING CROSS CONVEYORS:
    - STRUCTURAL STEEL CHANNEL MAIN FRAME
    - MOUNTED ON ROLLERS TO MANUALLY MOVE TO DISCHARGE FROM EITHER
    SIDE OF CHASSIS
    - RECEIVE OVERSIZE MATERIAL FROM RESPECTIVE MIDDLE AND BOTTOM
    DECKS
    - CLASS II HEAD END DRIVE
    - 7.5 HP MOTOR V-BELT DRIVE WITH DRIVE GUARD
    - DODGE SHAFT MOUNT REDUCER
    - HEAD PULLEY - 10" DIAMETER DRUM CROWN FACE 3/8" DIAMOND LAGGING
    - TAIL PULLEY - 10" DIAMETER WING PULLEY
    - SHAFTS - TURNED AND POLISHED
    - DODGE BEARINGS
    - MANUAL SCREW TAKE-UPS
    - CARRY IDLERS - C5 20 DEGREES TROUGH CHANNEL MOUNT SPACED 26" OC
    - BELTING - 3 PLY 3/16" X 1/16" PIW
    -BELT SPLICE: VULCANIZED
  • 60" X 29- FINES CONVEYOR:
    - STRUCTURAL STEEL CHANNEL MAIN FRAME
    - CLASS II HEAD END DRIVE
    - 15 HP MOTOR V-BELT DRIVE
    - DODGE SHAFT MOUNT REDUCER
    - HEAD PULLEY - 12" DIAMETER DRUM CROWN FACE 3/8" HERRINGBONE
    LAGGING
    - TAIL PULLEY - 12" DIAMETER CHEVRON›¼® WING PULLEY
    - SHAFTS - TURNED AND POLISHED
    - DODGE BEARINGS
    - MANUAL SCREW TAKE-UPS
    - CARRY IDLERS - C5 20 DEGREES PICKING CHANNEL MOUNT SPACED
    APPROXIMATELY 27" OC
    - RETURNIDLERS - C5 FLAT ROLLS SPACED 10- OC
    - BELTING - 3 PLY 3/16" X 1/16" 330 PIW
    - BELT SPLICE VULCANIZED
  • WALKWAY:
    - 3/16" DIAMOND TREAD PLATE ALONG BOTH SIDES AND FEED END OF SCREEN
    - 3/16" DIAMOND TREAD PLATE ALONG DISCHARGE CHUTE FOR EASIER
    ACCESS TO THE
  • BLENDING GATES AND DISCHARGE CHUTE:
    - INCLUDES TOE BOARD AND TWO-RAIL HANDRAIL
    - WALKWAY ACCESS ON BOTH SIDES OF THE CHASSIS WITH (1) ACCESS LADDER
  • HYDRAULIC "RUN-ON" LEVELING JACKS:
    - (4) 6X 18" HYDRAULIC CYLINDERS
    - COUNTERBALANCE VALVES BUILT INTO HEAD OF CYLINDER NO PINNING
    REQUIRED
    - (4) MANUAL LEVER VALVES; (1) FOR EACH CYLINDER
    - 9HP HONDA GASOLINE OVER HYDRAULIC PUMP UNIT
  • TOOLBOX:
    - CONSTRUCTED OF ALUMINUM AND MOUNTED ON CHASSIS
    - TWO LATCHES ON HINGED COVER
    - 18" X 18" X 36" LONG
  • CRIBBING STORAGE - MUST HAVE HORIZONTAL FINES CONVEYOR
    - STORAGE COMPARTMENT FOR CRIBBING MATERIALS DRIVE GUARD
    SCREEN CLOTH ETC
  • VOLTAGE:
    - REQUIRED POWER IS 480 V/ 3 PH / 60 HZ
  • GUARDING:
    - PRICE INCLUDES STANDARD GUARDING
    - CUSTOMER IS RESPONSIBLE TO HAVE GUARDING CHECK BY LOCAL
    INSPECTORS
    - PAINT: GRAPHITE GRAY
    - (1) COAT PRIMER; (1) FINISH COAT ENAMEL
  • OWNER-S MANUAL:
    - (1) COPY INCLUDED FOR OPERATION AND MAINTENANCE
  • INCLUDED OPTIONS:
  • EXTENDED FRONT WALKWAY:
    - 3/16" DIAMOND TREAD PLATE ALONG DISCHARGE CHUTE FOR EASIER
    ACCESS TO THE BLENDING GATES AND DISCHARGE CHUTE
    - INCLUDES TOE BOARD ANDTWO-RAIL HANDRAIL
    - WALKWAY ACCESS ON BOTH SIDES OF THE CHASSIS
  • AES ELECTRICAL SWITCHGEAR FOR 7203 SCREENING PLANT:
    - 50 HP SCREEN
    - 15 HP UNDERSCREEN CONVEYOR
    - 7.5 HP CROSS 1
    - 7.5 HP CROSS 2
    - 5 HP SIRC TO 20 AMP RECEPTACLE
    -(2) 20 HP SPARE SIZE #2 TO 60 AMP RECEPTACLES
    - (1) 60 AMP FEED BREAKER TO 60 AMP RECEPTACLE
    - (1) 100 AMP FEED BREAKER TO 100 AMP RECEPTACLE
    - BUTTONS ON DOOR PANEL STAND TRANSPORTS ON PLANT ON GROUND FOR
    OPERATION
    - HOUR METER E-STOP SAFETY START HORN (MANUAL)
    - 100FT POWER CORD WITH 400 AMP CAM-LOCKS AND 1/0 GROUND

Make An Offer

INTERESTED IN THIS MACHINE? SEND US A MESSAGE.

Fields with asterisks * are required

Send to a Friend

Fields with asterisks * are required