2018 Finlay I-120RS Crusher - Impact For Sale » General Equipment & Supplies, Inc. ND, SD, MN, IA

2018 Finlay I-120RS Crusher - Impact For Sale

2018 Finlay I-120RS Crusher - Impact For Sale
  • Description
  • IMPACT CRUSHER
  • Hours
  • 415
  • Inventory ID
  • E00054459
  • Serial
  • TRX120RSAOMIB8520
(800) 437-2924
General Equipment & Supplies, Inc.

Equipment is on rent
Contact your Salesperson for more information

Details

  • Inventory ID: E00054459
  • Status: On Rent
  • Make: Finlay
  • Model: I-120RS
  • Year: 2018
  • Serial#: TRX120RSAOMIB8520

Equipment Text

  • FINLAY I-120RS EQUIPPED AS PER BELOW:
  • ENGINE
  • - TIER 4 FINAL /STAGE IV : SCANIA DC9 257KW (350 HP) ENGINE
  • IMPACT
  • - TEREX CR038 IMPACT CHAMBER
  • CHAMBER:
  • - FULLY HYDRAULICALLY ASSISTED APRON SETTING AND HYDRAULIC APRON RELEASE
  • - MANUAL RAISECHAMBER FLAP ALLOWING EXTRA INLET CLEARANCE
  • - 4 BAR ROTOR - MARTENSITIC BLOW BARS 2 HIGH & 2 LOW
  • - DIRECT DRIVE VIA CLUTCH
  • - DRIVE BELT TENSIONER WHEEL
  • - BLOW BAR LIFTING TOOL SUPPLIED
  • - TIP SPEED RANGE 36-45 M/SEC (118-148 FT./SEC).
  • - SMALLER ENGINE CHAMBER DRIVE PULLEY TO GIVE A ROTOR TIP SPEED RANGE OF 32-40
  • M/SEC (105-131 FT./SEC). STANDARD LARGE PULLEY STILL DISPATCHED WITH MACHINE.
  • - HYDRAULIC RAISE OF CHAMBER INLET FLAP
  • - ROTOR FITTED WITH 2 FULL HIGH CHROME & 2 LOWMARTENSITIC BLOW BARS
  • HOPPER & FEEDER:
  • - VGF FIXED HOPPER
  • - STEPPED GRIZZLY FEEDER WITH INTEGRAL PRE-SCREEN STANDARD 50MM SPACING
  • - MESH APERTURE ON GRIZZLY FEEDER: 38MM
  • - SELECTABLE DISCHARGE TO BY-PASS CONVEYOR OR MAIN CONVEYOR
  • - INDEPENDENT PRE-SCREEN C/W HYDRAULICALLY FOLDING AND LOCKING HOPPER AND
  • BLANKING
  • - MAT. 50MM CASSETTE SPACING & 38MM MESH AS STANDARD - MESH APERTURES AVAILABLE
  • UPON REQUEST
  • - INDEPENDENT PRE-SCREEN HOPPER EXTENSIONS
  • - PRE-SCREEN PUNCH PLATE OPTIONAL SPACING - 38MM 50MM 63MM OR 75MM
  • MAIN CONVEYOR:
  • - 1100MM (43.3") BELT FULL LENGTH
  • - UNDER CRUSHER VIBRATORY FEEDER WITH WEAR RESISTANT STEEL LINERS (C/W SHORTENED
  • MAIN CONVEYOR)
  • AUXILIARY CONVEYORS:
  • - HYDRAULIC RAISE/ LOWER FOR MAGNET
  • - PIPED FOR OVER BAND MAGNET
  • - BYPASS CONVEYOR WITH 600MM WIDE PLAIN BELT DISCHARGING TO THE LHS OF THE
  • MACHINE.
  • - TWIN POLE OVER BAND MAGNET C/W STAINLESS STEEL SKIRTING & STAINLESS STEEL
  • DISCHARGE CHUTE DISCHARGING TO RHS OF THEMACHINE.
  • RS COMPONENTS:
  • - 3.66M X 1.52M (12- X 5-) TWO DECK AFTER SCREEN C/W 50MM TOP DECK AND 40MM
  • BOTTOM DECK MESH AS STANDARD UNLESS OTHERWISE STATED
  • - 500MM (20") WIDE BELT SINGLE TRANSFER CONVEYOR COLLECTING MATERIAL FROM BOTH
  • DECKS.
  • - 500MM (20") WIDE BELT HYDRAULIC FOLDING RE-CIRCULATING CONVEYOR ABLE TO SLEW
  • FOR STOCKPILING OVERSIZE MATERIAL
  • - 1400MM (55") WIDE BELT FINES CONVEYOR
  • - RAPID DETACH AFTER SCREEN SYSTEM FOR FLEXIBILITY.
  • - BELT WEIGHER
  • - ADDITIONAL DUST COVER ON FINES CONVEYOR
  • - ADDITIONAL TRANSFER CONVEYOR FOR COLLECTING MATERIAL FROM EACH INDIVIDUAL DECK
  • OF SCREEN BOX
  • CLIMATE SPEC:
  • - STANDARD OILS - (RECOMMENDED FOR AMBIENT TEMPERATURES BETWEEN -5 TO +30°C)
  • DUST SUPPRESSION:
  • - PIPEDFOR DUST SUPPRESSION C/W SPRAY BARS
  • ELECTRICAL:
  • - EMERGENCY STOPS
  • - HAND HELD TRACK CONTROL SET WITH CONNECTION LEAD
  • - T-LINK TELEMETRY SYSTEM FITTED C/W 3 YEARS DATA SUBSCRIPTION
  • - RADIO REMOTE SYSTEM: OPERATIONAL CONTROLS OF MACHINE (AUTO START/STOP) & TRACK
  • MOVEMENT
  • - PRESSURIZED AIR SYSTEM FOR ELECTRICAL CONTROL CABINET
  • SAFETY GUARDS IN COMPLIANCE WITH MACHINERY DIRECTIVE

Make An Offer

INTERESTED IN THIS MACHINE? SEND US A MESSAGE.

Fields with asterisks* are required.

Send to a Friend

Fields with asterisks* are required.