2018 Other 6203-T44 Washing Equipment For Sale » General Equipment & Supplies, Inc. ND, SD, MN, IA

2018 Other 6203-T44 Washing Equipment For Sale

  • Description
  • WASH PLANT
  • Hours
  • 1254
  • Inventory ID
  • E00053031
  • Serial
  • 6-20-3-W-391-18
(800) 437-2924
General Equipment & Supplies, Inc.

Equipment is on rent
Contact your Salesperson for more information

Details

  • Inventory ID: E00053031
  • Status: On Rent
  • Make: Other
  • Model: 6203-T44
  • Year: 2018
  • Serial#: 6-20-3-W-391-18

Equipment Text

  • PIT PORTABLE 6- X 20- 3 DECK JCI WASH PLANT WITH 44" X 32- DOUBLE SANDSCREW:
  • 3 AXLE CARRIER 18" WF 60# DROP CENTER STYLE:
    - HUTCH EQUALIZING SUSPENSION.
    - 22 500# STANDARD FORGE AXLES 11:00R X 22.5 TIRES.
    - 4 GROUND SUPPORT STANDS STANDARD 5TH WHEEL PLATE.
    - AIR BRAKES BRAKE LIGHTS MARKER LIGHTS REFLECTIVE TAPE AND MUD FLAPS.
  • 6-- X 20- 3 DECK JCI SCREEN:
    - 40 HP TEFC 1200 RPM TOSHIBA MOTOR.
    - HUCK BOLTED SCREEN SIDES.
    - ADJUSTABLE OVAL STROKE ANGLE & LENGTH OF STROKE AND SPEED.
    - SELF-ALIGNING SPHERICAL ROLLER BEARINGS.
    - SPLASH TYPE OIL SYSTEM.
    - COIL SPRINGS 5 FT PANELS BASE FRAME (3) SIDE TENSIONED DECKS FLAT
    SCREEN RH DRIVE.
  • KOLBERG MODEL 5044-32T SAND PREP TO INCLUDE:
  • - SPIRAL: REPLACEABLE URETHANE OUTER WEAR SHOES AND REPLACEABLE AR STEEL INNER
    - WEARING SHOES; SPIRAL SPEED 13 RPM
    - REDUCER ASSEMBLY: SHAFT MOUNT (NOTE: 75% SPEED DRIVE IS STANDARD AND WILL BE
    FURNISHED UNLESS NOTIFIED OTHERWISE.)
    - MOTOR: TWO (2) 20 HP ELECTRIC TEFC 3/60/230-460 AT 1800 RPM; LESS STARTER AND
    WIRING.
    - TANK: HEAVY STEEL PLATE TUB AND FLARES; INCLUDES RISING CURRENT MANIFOLD AND
    OVERFLOW COLLECTING FLUME
    - BEARING: LOWER OUTBOARD REGREASEABLEWITH RUBBER SEALS
    - LESS DISCHARGE CHUTE
    - LESS SUPPORTS
    INCLUDED OPTIONS FOR KPI 5044-32T SCREW:
    - SPIRAL - REPLACEABLE NI-HARD WEARING SHOES VS. URETHANE.
    - DISCHARGE CHUTE WITH 3/16" AR LINER.
    - FOLDING FLARES (CUSTOMER WILL INSTALL IN A PORTABLE WASH PLANT APPLICATION)
    - PAINT - RAL7024 GRAPHITE GRAY
  • 14 BAR WASH SYSTEM:
    - FULL LENGTH MANIFOLD WITH INLET PIPE AND FLANGE.
    - INDIVIDUAL BRASS GATE VALVES.
    - EL JAY SPRAY BAR SEALING BOOTS.
    - SCH. 40 1½"Ø SPRAY BARS WITH BRASS "VEE JET" NOZZLES.
    - FRESH WATER FLUSH SYSTEM.
  • AR LINED DISCHARGE CHUTES WITH EASY ACCESS TO PRODUCT CONVEYORS.
  • UNDER SCREEN COLLECTION HOPPER DISCHARGING INTO COLLECTION BOX OF SAND SCREW.
  • TWIN 44" X 32- SANDSCREW.
  • HEAVY DUTY MOUNTING FOR TWIN 44" X 32- SANDSCREW:
    PLUMBING FOR SAND SCREW INCLUDED.
  • DIAMOND PLATE WALKWAYS & 48" PLATFORM AT FEED END OF SCREEN 42" TUBESTEEL
    HANDRAILS TOE BOARDS AND ACCESS LADDER.
  • SAFETY GUARDS SAND BLASTED CHASSIS RUST INHIBITOR PRIMER AND TWO FINISH COATS
    OF PAINT INCLUDED. PAINTED GRAPHITE GREY.
  • INCLUDED OPTIONS:
  • OVERSIZED SLURRY BOX WITH 5 WATER OUTLETS INCLUDING FOLD-DOWN SUPPORT STAND.
  • HYDRAULIC FOLD FOR SLURRY BOX:
  • FABTEC PLANT MOUNTED HYDRAULIC STABILIZING SYSTEM: (NON RUN-ON)
    12V HYDRAULIC PACKAGE WITH SAFETY-LOK CIRCUIT.
    70 000 LB. CAPACITY HYDRAULIC LEGS.
    HEAVY DUTY FOOT PADS.
  • SELF CONTAINED HONDA 8 HP HYD. POWER PACKAGE ~VS~ HPX 200 12V:
    ELECTRIC START.
    12 GALLON HYDRAULIC RESERVOIR WITH FILTER PROTECTION.
    2 1/2 GPM PUMP.
  • FRONT FOLDING LEGS WITH INTERGRATED SCREW JACKS STYLE ACME THREAD WITH FOOT
    PADS:
  • (4) TELESCOPING SCREW TYPE STABILIZING STANDS:
  • PANEL STYLE BLENDING ON 1ST TO 2ND PRODUCTS AND FLOP 2ND TO 3RD 3RD TO 2ND
  • 30" X 12- AND (1) 24" X 12- CROSS CONVEYORS ON 2ND AND 3RD DECKS 5 HP SEW RIGHT
    ANGLE DRIVES:
    CHANNEL INSET IDLERS.
    VULCANIZED LAGGED HEAD PULLEY AND SELF-CLEANING WING TAIL PULLEY.
    DODGE SCM BEARINGS.
    FULL SKIRT BOARD WITH WIPER.
    MOUNTED ON SLIDERS WITH HOLD-DOWN BRACKETS.
  • 13- 6" CROSS CONVEYERS ~VS~ 12- CROSS CONVEYERS:
  • VULCANIZE SPLICE 24" BELT ~VS~ STANDARD CLIPS.
  • VULCANIZE SPLICE 30" BELT ~VS~ STANDARD CLIPS.
  • 24" SUPERIOR X-TERRA BELT SCRAPER.
  • 30" SUPERIOR X-TERRA BELT SCRAPER.
  • TOOL BOX MOUNTED ON CARRIER:
  • ROLL-OUT STYLE PRODUCT CHUTES WITH EXTRA WALKWAYS:
  • PRESSURE GAUGE INSTALLED ON WATER MANIFOLD:
  • AES ELECTRICAL SWITCHGEAR FOR 7X20T44 WASH PLANT:
    - 60X48 ENCLOSURE WITH WELDED UPPER LEGS AND A LEG KIT
    - 400 AMP MAIN BREAKER - EXTERNALLY OPERATED AND LOCKABLE
    - DRIP SHIELD
    - CONTROLS MOUNTED IN ENCLOSURE DOOR
    - MANUALLY OPERATED START UP SIGNAL HORN
    - ILLUMINATED EMERGENCY STOP BUTTON
    - 40 HP SCREEN MOTOR - SIZE 3 MOTOR STARTER
    - (2) 20 HP SCREW MOTORS
    - (3) 20 HP SPARES - SIZE 2 MOTOR STARTERS 60 AMP HUBBELL RECEPTACLES
    - (2) 5 HP CROSS CONVEYORS SIZE 1 MOTOR STARTERS
    - CONTROL POWER TRANSFORMER FOR STARTERS
    - 100- OF POWER CORD
  • GUARDING - WE DO NOT WARRANT THAT MANUFACTURERS- GUARDING WILL MEET ALL LOCAL
    CODES. IT IS THE RESPONSIBILITY OF THE END USER TO HAVE GUARDING CHECKED BY A
    LOCAL INSPECTOR PRIOR TO STARTUP OF EQUIPMENT OPERATIONS CORRECTIVE ACTIONS
    AND ASSOCIATED EXPENSE ARE THE RESPONSIBILITY OF THE END USER.

INTERESTED IN THIS MACHINE? SEND US A MESSAGE

Fields with asterisks * are required

Send to a Friend

Fields with asterisks * are required