Photo Count: 2-
Price:
$385,000 USD -
Location:
Fargo, North Dakota - (800) 437-2924
Interested in this machine? Send us a message
PriceWatch
Subscribe to be notified of price changes on this item.
2018 Other Crusher - Impact I-120RS
Fields with asterisks * are required.
Print This Page
Description
TRACKED IMPACT CRUSHER
Inventory ID
E00071931
Serial
TRX120RSAOMIB8520
Machine Location
Details
- Inventory ID: E00071931
- Status: On Yard
- Make: Other
- Model: I-120RS
- Year: 2018
- Serial#: TRX120RSAOMIB8520
Notes
- USED FINLAY I-120RS EQUIPPED AS PER BELOW:
- ENGINE
- TIER 4 FINAL /STAGE IV : SCANIA DC9 257KW (350 HP) ENGINE - IMPACT
- TEREX CR038 IMPACT CHAMBER - CHAMBER:
- FULLY HYDRAULICALLY ASSISTED APRON SETTING AND HYDRAULIC APRON RELEASE
- MANUAL RAISE CHAMBER FLAP ALLOWING EXTRA INLET CLEARANCE
- 4 BAR ROTOR - MARTENSITIC BLOW BARS 2 HIGH & 2 LOW
- DIRECT DRIVE VIA CLUTCH
- DRIVE BELT TENSIONER WHEEL
- BLOW BAR LIFTING TOOL SUPPLIED
- TIP SPEED RANGE 36-45 M/SEC (118-148 FT./SEC).
- SMALLER ENGINE CHAMBER DRIVE PULLEY TO GIVE A ROTOR TIP SPEED RANGE OF 32-40
M/SEC (105-131 FT./SEC). STANDARD LARGE PULLEY STILL DISPATCHED WITH MACHINE.
- HYDRAULIC RAISE OF CHAMBER INLET FLAP
- ROTOR FITTED WITH 2 FULL HIGH CHROME & 2 LOW MARTENSITIC BLOW BARS - HOPPER & FEEDER:
- VGF FIXED HOPPER
- STEPPED GRIZZLY FEEDER WITH INTEGRAL PRE-SCREEN STANDARD 50MM SPACING
- MESH APERTURE ON GRIZZLY FEEDER: 38MM
- SELECTABLE DISCHARGE TO BY-PASS CONVEYOR OR MAIN CONVEYOR
- INDEPENDENT PRE-SCREEN C/W HYDRAULICALLY FOLDING AND LOCKING HOPPER AND
BLANKING
- MAT. 50MM CASSETTE SPACING & 38MM MESH AS STANDARD - MESH APERTURES AVAILABLE
UPON REQUEST
- INDEPENDENT PRE-SCREEN HOPPER EXTENSIONS
- PRE-SCREEN PUNCH PLATE OPTIONAL SPACING - 38MM 50MM 63MM OR 75MM - MAIN CONVEYOR:
- 1100MM (43.3") BELT FULL LENGTH
- UNDER CRUSHER VIBRATORY FEEDER WITH WEAR RESISTANT STEEL LINERS (C/W SHORTENED
MAIN CONVEYOR) - AUXILIARY CONVEYORS:
- HYDRAULIC RAISE/ LOWER FOR MAGNET
- PIPED FOR OVER BAND MAGNET
- BYPASS CONVEYOR WITH 600MM WIDE PLAIN BELT DISCHARGING TO THE LHS OF THE
MACHINE.
- TWIN POLE OVER BAND MAGNET C/W STAINLESS STEEL SKIRTING & STAINLESS STEEL
DISCHARGE CHUTE DISCHARGING TO RHS OF THE MACHINE. - RS COMPONENTS:
- 3.66M X 1.52M (12- X 5-) TWO DECK AFTER SCREEN C/W 50MM TOP DECK AND 40MM
BOTTOM DECK MESH AS STANDARD UNLESS OTHERWISE STATED
- 500MM (20") WIDE BELT SINGLETRANSFER CONVEYOR COLLECTING MATERIAL FROM BOTH
DECKS.
- 500MM (20") WIDE BELT HYDRAULIC FOLDING RE-CIRCULATING CONVEYOR ABLE TO SLEW
FOR STOCKPILING OVERSIZE MATERIAL
- 1400MM (55") WIDE BELT FINES CONVEYOR
- RAPID DETACH AFTER SCREEN SYSTEM FOR FLEXIBILITY.
- BELT WEIGHER
- ADDITIONAL DUST COVER ON FINES CONVEYOR
- ADDITIONAL TRANSFER CONVEYOR FOR COLLECTING MATERIAL FROM EACH INDIVIDUAL DECK
OF SCREEN BOX - CLIMATE SPEC:
- STANDARD OILS - (RECOMMENDED FOR AMBIENT TEMPERATURES BETWEEN -5 TO +30›¼°C) - DUST SUPPRESSION:
- PIPED FOR DUST SUPPRESSION C/W SPRAY BARS - ELECTRICAL:
- EMERGENCY STOPS
- HAND HELD TRACK CONTROL SET WITH CONNECTION LEAD
- T-LINK TELEMETRY SYSTEM FITTED C/W 3 YEARSDATA SUBSCRIPTION
- RADIO REMOTE SYSTEM: OPERATIONAL CONTROLS OF MACHINE (AUTO START/STOP) & TRACK
MOVEMENT
- PRESSURIZED AIR SYSTEM FOR ELECTRICAL CONTROL CABINET - SAFETY GUARDS IN COMPLIANCE WITH MACHINERY DIRECTIVE