2019 Superior 3244 Crusher - Jaw For Sale » General Equipment & Supplies, Inc. ND, SD, MN, IA

2019 Superior 3244 Crusher - Jaw For Sale

  • Price
  • $625,000 USD
  • Description
  • JAW CRUSHING PLANT
  • Inventory ID
  • E00055535
  • Serial
  • 991232
(800) 437-2924
Machine Location:
View Google Map
General Equipment & Supplies, Inc.
4300 Main Ave
Fargo, North Dakota 58103

Details

  • Inventory ID: E00055535
  • Status: On Yard
  • Class: Used
  • Make: Superior
  • Model: 3244
  • Year: 2019
  • Serial#: 991232

Equipment Text

  • SUPERIOR LIBERTY 32X44 JAW CRUSHER PLANT EQUIPPED AS PER BELOW:
  • CARRIER:
    - HEAVY DUTY WIDE FLANGE MAIN FRAME BEAMS
    - FIFTH WHEEL HITCH
    - (3) AXLES WITH (12) 11R-22.5 RADIAL TIRES WITH POLISHED ALUMINUM RIMS - (1) STINGER AXLE WITH (4) RADIAL TIRES WITH POLISHED ALUMINUM RIMS
    - AIR CONTROLLED BRAKES
    - MUD FLAPS
    - (2) FOLD DOWN KING PIN SUPPORTS
    - TRAVEL LIGHTS WITH TURN AND DIRECTIONAL CONTROL SIGNALS
    - GREASE PACKAGE CONSISTING OF ONE (1) ›¼À“ TWO (2) LOCATIONS ON THE CHASSIS WHERE HEAD & TAIL PULLEY BEARINGS ARE PLUMBED/DIRECTED TO. THIS ENABLES OPERATOR TO PERFORM ROUTINE MAINTENANCE FROM THE SAFETY OF THE "EXTERIOR" OF THE PLANT. THESE AREAS WILL BE CLEARLY IDENTIFIED AS A "GREASE POINT".
  • LIBERTY›¼Â¢ 32X44 JAW CRUSHER:
    - SUPPLY AND INSTALLATION FOR A SUPERIOR L3244 JAW CRUSHER WITH CRUSHER SHEAVE
    - PRICE INCLUDES DRIVE MOTOR WITH SHEAVE V-BELTS AND DRIVE GUARD
    - PRICE INCLUDES UNDERCRUSHER GATHERING HOPPER WITH 3/8" AR400AND ADJUSTABLE RUBBER FLASHING
    - ALL LUBRICANTS AND FLUIDS REQUIRED TO OPERATE THE CRUSHER
    RECEIVING HOPPER
    - 150 HP 1200RPM TEFC ELECTRIC MOTOR WITH GUARDS DRIVE BELT AND SHEAVE
    - CRUSHER AND ALL PERTINENT ITEMS AND COMPONENTS ARE SUPPLIED BY SUPERIOR
  • CRUSHER HOPPER (ROCK BOX ON TOP OF HOPPER):
    - HOPPER IS MANUFACTURED USING 3/4" MS PLATE AND LINED (PLUG WELDED) USING 1/2" 400-WEAR PLATE.
    - HOPPER IS FITTED WITH REPLACEABLE SKIRTING IN SOME AREAS TO KEEP DUST TO AMINIMUM
    - HOPPER IS MANUFACTURED AS CLOSE AS POSSIBLE TO PITMAN ARM WITHOUT TOUCHING
    - ROCK BOX IS LARGE ENOUGH TO ALLOW CHANGING OF MANGANESE WITHOUT REMOVING FROM TOP OF JAW
  • CRUSHER DISCHARGE CHUTE:
    - 1/2" THICK RE-INFORCED STEEL CONSTRUCTION. LEDGE-LIP ROCK BOX HOPPER IS TOTALLY MANUFACTURED USING 400-WEAR PLATE
    - HIGH ABRASION WEAR AREAS ADDITIONALLY LINED USING 3/4" 400 WEAR PLATE.
    - REPLACEABLE 60 DUROMETER SKIRT BOARD RUBBER C/W CLAMP BARS WHERE REQUIRED.
  • INTREPID›¼Â¢ 42X20 FEEDER:
    - SUPPLY AND INSTALLATION FOR A SUPERIOR 42" X 20- VIBRATING GRIZZLY FEEDER COMPLETE WITH SHEAVE
    - PRICE INCLUDES DRIVE MOTOR MOTOR SHEAVE V-BELTS AND DRIVE GUARD
    - 5- ADJUSTABLE GRIZZLY
    - 30HP MOTOR - WITHVFD
  • FEED HOPPER:
    - 3/4" THICK REINFORCED STEEL CONSTRUCTION. HOPPER IS TOTALLY MANUFACTURED USING 400-WEAR PLATE.
    - SLOPED SIDE AND BACK CONSTRUCTION.
    - OPTIMUM CLEARANCE BETWEEN HOPPER AND FEEDER
    - DISCHARGE END CROSS TIE.
    - EXTERIOR SIDES OF FEED HOPPER FITTED WITH CONVEYOR BELT RUBBER TO PREVENT ACCESS TO VGF AND ALSO ASSIST IN KEEPING DEBRIS OR FOREIGN MATERIAL FROM ENTERING THE AREA DURING OPERATION.
    - NEEDS TO BE REMOVED FOR TRANSPORT MODE
  • GRIZZLY FINES CHUTE:
    - 1/4" THICK RE-INFORCED STEEL CONSTRUCTIONWITH 1/4" (PLUG WELDED) AR 400-WEAR PLATE.
    - HINGED OR BOLTED SIDE ACCESS DOOR.
    - REPLACEABLE 60 DUROMETER SKIRT BOARD RUBBER C/W CLAMP BARS WHERE REQUIRED.
    - DELIVERS GRIZZLY THROUGHS TO PRODUCT CONVEYOR
  • WALKWAY:
    - "3/16" DIAMOND TREAD PLATE TWO-RAIL HAND RAIL TOE BOARD
    - LOWER MAINTENANCE WALKWAYS/PLATFORMS AND OPERATOR-S PLATFORM.
    - TWO (2) FOLDING STEP ASSEMBLIES TO GAIN ACCESS TO LOWER PLATFORM(S)
    - STEP ASSEMBLY TO CONE OBSERVATION PLATFORM.
    - ALL HAND RAILING C/W NECESSARY KICK PLATES AND ARE MANUFACTURED AS PER SUPERIOR-S UNDERSTANDING OF OHSA STANDARDS.
    - RAILING AROUND PERIMETER - TWO RAILS WITH STEEL TOE BOARD
    - ACCESS LADDER FROM GRADE
  • 48" EXTENDED DISCHARGE CONVEYOR:
    - RECEIVES UNDER-SIZE MATERIAL FROM GRIZZLY AND RECEIVES CRUSHER DISCHARGE MATERIAL
    - SUPERIOR POWER FOLD
    - 20 HP ELECTRIC DRIVE WITH SHAFT MOUNT REDUCER AND BACKSTOP
    - 500 STPH OF 100 PCF MATERIAL
    - 300 FPM BELT SPEED
    - SUPERIOR 4- IMPACT BED IN LOAD AREA
    - CEMA C 5" DIAMETER STEEL ROLL TROUGH CARRYING IDLERS SPACED 3.5 FEET
    - CEMA C 5" DIAMETER FLAT STEEL RETURN ROLLS
    - 3 PLY 1/4" X 1/16" 330 PIW BELT
    - 16" HEAD PULLEY
    - 14CHEVRON›¼® WING TAIL PULLEY
    - FACTORY VULCANIZED SPLICE
    - SUPERIOR EXTERRA PRIMARY BELT CLEANER
  • HYDRAULIC "LEVELING LEGS"
    - (4) 6" X 20" HYDRAULIC CYLINDERS
    - (4) MANUAL LEVER VALVES; (1) FOR EACH CYLINDER
    - 9HP HONDA MOTOR GASOLINE OVER HYDRAULIC ENCLOSED CABINET
  • GUARDING:
    - PRICE INCLUDES STANDARD GUARDING
    - GUARDS MAY NOT MEET ALL LOCAL CODES; CUSTOMER IS RESPONSIBLE TO HAVE GUARDING INSPECTED
  • VOLTAGE:
    - 480 V / 3 PH / 60 HZ
  • HYDRAULIC PACKAGE:
    - 15HPELECTRIC HYDRAULIC PACKAGE TO OPERATE HYDRAULIC WEDGE ADJUST AND HYDRAULIC TENSION ON THE JAW
    - 9 HP HONDA POWERED HYDRAULIC UNIT TO OPERATE HYDRAULIC RUN-ON LEGS AND POWERFOLD FOR DISCHARGE CONVEYOR
    - INDIVIDUAL LEVERS TO OPERATE ALL RUN ON CYLINDERS
    - ALL HYDRAULIC VALVES HOSES & FITTINGS. UNIT COMES COMPLETELY PLUMBED FILLED WITH OIL TESTED AND READY FOR IMMEDIATE OPERATION
  • ELECTRICAL:
    - NEMA 4 ENCLOSURE WITH NEMA RATED ALLEN BRADLEY COMPONENTS
    - CONTROL PANEL IS WIRED TO EACH ON-PLANT MOTOR
    - (1) 150 HP CRUSHER DRIVE MOTOR
    - (1) 30 HP FEEDER DRIVE MOTOR WITH VFD
    - (1) 20 HP FRONT DISCHARGE CONVEYOR DRIVE MOTOR
    - (1) 15 HP MOTOR FOR ELECTRIC HYDRAULIC SYSTEM FOR TILT GRIZZLY
    - CRUSHER AMPGUAGE ON OUTSIDE OF PANEL
    - CRUSHER HOUR METER INSIDE PANEL
    - WARNING HORN AND LIGHT
    - LABELLED START/STOP PUSHBUTTONS AND E-STOP PUSHBUTTON MOUNTED ON DOOR OF ELECTRICAL PANEL
    - MOUNTED ON SKID FRAME WITH LIFTING EYES
    - POWER CABLES FROM MOTORS TO PLACE PANEL 30- FROM PLANT CABLE STORAGE TRAY INSIDE FRAME ABOVE AXLES
    - 100 FT POWER CORD
  • PAINT:
    - (1) COAT PRIMER; (1) FINISH COAT ENAMEL
    - GRAPHITE GRAY
  • OWNER-S MANUAL:
    - (1) COPY INCLUDED FOR OPERATION AND MAINTENANCE OF CHASSIS AND CONVEYOR
  • LIBERTY JAW CRUSHER:
    - WEIGHT: 54 700 LBS.
    - RECOMMENDED HORSEPOWER: 150 HP 1200 RPM MOTOR RECOMMENDED
    - MOTOR MOUNT: FRAME MOUNTED WITH BELT TENSION SYSTEM
    - FLYWHEEL: 60" DIAMETER
    - MAIN FRAME: FABRICATED STRESS RELIEVED AND FULLY WELDED HEAVY DUTY MAIN FRAME
    - PITMAN: FABRICATED FEA ANALYZED AND STRESS RELIEVED PITMAN WITH REPLACEABLE TOE PROTECTION
    - SHAFT: PRECISION MACHINED LARGE DIAMETER HIGH STRENGTH 4340 SHAFT
    - BEARINGS: HIGH LOAD CAPACITY INBOARD AND OUTBOARD SPHERICAL ROLLER BEARINGS
    - LUBRICATION: STANDARD GREASE LUBRICATION SYSTEM
    - LINERS: ABRASION RESISTANT CHEEK PLATE LINERS AND BARREL PROTECTOR
    - JAW DIES: 18% MANGANESE PITMAN AND STATIONARY JAW DIES WITH LIFTING EYES BUILT IN
    - ADJUSTMENT: HYDRAULIC WEDGE WITH HYDRAULIC CONTROL PACKAGE
    - TENSION SYSTEM: AUTOMATIC ADJUST HYDRAULIC OVER SPRING TENSION SYSTEM
    - CONTROL PACKAGE: STANDARD CONTROL PACKAGE FOR CSS SETTING ADJUSTMENT AND HYDRAULIC TENSION PRESSURE
    - HPU PACKAGE: INCLUDES TANK CONTROLS PRESSURE SENSOR ACCUMULATOR
    - PAINT: STANDARD PAINT - WINDOW GRAY [RAL 7040] ON JAW BODY. GRAPHITE GRAY [RAL 7024] ON FLYWHEEL AND GUARDING
  • DRIVE:
    - V-BELT DRIVE: V-BELT DRIVE NOT INCLUDED
    - VOLTAGE: 480 V / 3 PH / 60 HZ
    - V-BELTS: NOT INCLUDED
    - DRIVE GUARD: MULTI PIECE GUARD ON DRIVEN SIDE AND SINGLE PIECE ON NON-DRIVEN SIDE
    - MOTOR: MOTOR NOT INCLUDED
    - MOTOR SHEAVE: MOTOR SHEAVE NOT INCLUDED

    OPTIONAL FEATURES:
    - MOUNTING ARRANGEMENT: STATIONARY BASE MOUNT
    - AUTO LUBE AND GREASE SYSTEM: NOT INCLUDED
    - BEARING TEMPERATURE SENSORS: NOT INCLUDED
    - ELECTRICAL: CONTROL PANEL AND WIRING NOT INCLUDED
  • INTREPID VIBRATING GRIZZLY FEEDER:
    - SIZE: 42" X 20-
    - DRIVE: 110MM
    - HORSEPOWER: 30
    - RPM: 1200
    - FEEDER MOUNTING ANGLE: FEEDER MOUNTED HORIZONTALLY [0 DEGREES]
    - SPRINGS: INBOARD SPRING ARRANGEMENT FOR HEAVY LOADS OR ROCKBOX DESIGN IN STATIONARY APPLICATION
  • FEEDER BODY CONSTRUCTION:
    - SUPPORT: I-BEAM PAN SUPPORTS ON 16" CENTERS
    - PAN THICKNESS: 3/4" THICK PAN SECTION
    - PAN LINER: REPLACEABLE 1/2" THICK AR LINERS
    - SIDE PLATE: 1/2" THICK SIDE PLATE CONSTRUCTION
  • GRIZZLYSECTION:
    - GRIZZLY SECTION: 5- CARTRIDGE STYLE GRIZZLY SECTION WITH ADJUSTABLE GRIZZLY BARS
    - GRIZZLY BAR MOUNTING: HORIZONTAL MOUNTED GRIZZLY BARS
    - GRIZZLY BAR SPACING: 5" NOMINAL OPENING

    ADDITIONAL SPECIFICATIONS:
    - VOLTAGE: 460V 3 PHASE 60 HZ
    - PAINT: STANDARD PAINT - WINDOW GRAY [RAL 7040] ON FEEDER BODY. GRAPHITE GRAY [RAL 7024] ON GUARDING
    - ELECTRIC MOTOR: 30 HP 1200 RPM TEFC
  • *SUPERIOR STANDARD 2 YEAR WARRANTY
    *SUPERIOR EXTENDED WARRANTY OF 3 YEARSON JAW CRUSHER
    *TOTAL OF 5 YEAR WARRANTY ON JAW CRUSHER
  • - GES TO PROVIDE CAM LOCKS FOR CUSTOMER 340KW
    (1) SET OF 690 AMP BR OR YLW PLUGS INSTALLED ON JAW POWER CORDS
    (1) 400 AMP GRN INSTALLED ON JAW GROUND
    (1) SET OF 690 AMPBR OR YLW CONNECTORS INSTALLED ON 3FT WHIPS
    (1) 400 AMP GRN CONNECTOR INSTALLED ON 3FT WHIP

Make An Offer

INTERESTED IN THIS MACHINE? SEND US A MESSAGE.

Fields with asterisks * are required

Send to a Friend

Fields with asterisks * are required