Photo Count: 4-
Price:
$62,500 USD -
Location:
Fargo, North Dakota - (800) 437-2924
Interested in this machine? Send us a message
PriceWatch
Subscribe to be notified of price changes on this item.
2021 MASTER MAG Magnet & Metal Detector EMAX120-CB
Fields with asterisks * are required.
Print This Page
Description
ELECTRO SELF-CLEANING MAGNET
Inventory ID
E00060671
Serial
255555-1
Machine Location
Details
- Inventory ID: E00060671
- Status: On Yard
- Make: MASTER MAG
- Model: EMAX120-CB
- Year: 2021
- Serial#: 255555-1
Notes
- MASTER MAG EMAX120-CB AIR COOLED ELECTRO SELF-CLEANING CROSS BELT MAGNET EQUIPPED AS PER BELOW:
- - THE E-MAX USES COOLING VIA AIR CONVECTION NOT OIL = LESS MAINTENANCE & NO TANK
- ANGLE INSTALLATION REQUIREMENT.
- - CAN BE USED ON FLAT OR ANGLED CONVEYORS WITH THE ONLY CHANGE REQUIRED IS THE
- HANGING CHAIN LENGTH.
- - THE E-MAX HAS A RECTANGULAR STEEL CORE- OTHER OIL COOLED DESIGNS HAVE CIRCULAR
- CORES.
- - THE E-MAX COIL IS WOUND IN ANODIZED ALUMINUM FOIL RATHER THAN ROUND NOMEX
- WRAPPED ALUMINUM WIRE IN THE CASE OF OIL COOLED COILS.
- - ANODIZED ALUMINUM FOIL IS EXPENSIVE BUT DOES MAKE FOR A MORE COMPACT COIL WITH
- NO AIR GAPS IN THE WINDING VERSUS ROUND WIRE USEDIN OIL COOLED COILS.
- MAGNET SYSTEM:
- - SPECIALLY DESIGNED BY COMPUTER TO MAXIMIZE EFFICIENCY THE FOIL WOUND MAGNET
- SYSTEM IS AIR COOLED TO AVOID THE REQUIREMENT OF OIL COOLING WITH INSULATION
- ABOVE CLASS -H-.
- - MAGNET SYSTEM IS MOUNTED ONTO A HEAVY-DUTY BACK PLATE AND ENCLOSED WITH THICK
- STEEL SIDE POLES TO PROVIDE OPTIMUM MAGNETIC POWER DIRECTED AT PRODUCT STREAM
- AND PROTECTED WITH AN 8MM THICK MANGANESE BASE PLATE TO REDUCE IMPACT
- DAMAGE.
- - DISCHARGE SYSTEM: A SHAFT MOUNTED WORM GEARED MOTOR UNIT FITTED WITH ELECTRIC
- MOTOR DRIVES THE 3-PLY RUBBER BELT WITH 5 AND 1.5MM COVERS FITTED WITH
- VULCANIZED WIPER STRIPS TO ENABLE EFFICIENT MATERIAL DISCHARGE
- - GUARDING: FULL LENGTH STAINLESS STEEL GUARDS ARE FITTED TO BOTH SIDES OF THE
- OVERBAND TO PREVENT ACCESS TO NIPPING POINTS AND PREVENT BELT DAMAGE DUE TO
- PRODUCT ENTRAPMENT
- - CROWNED PULLEYS: TO REDUCE TRACKINGISSUES WITH THE BELT
- - SUBSTANTIAL FRAMEWORK
- - WELDED CONSTRUCTION PROVIDED WITH EYEBOLTS FOR CUSTOMER-S SUSPENSION SLINGS
- - FINISH: ALL STEEL WILL HAVE ONE COAT PRIMER AND TWO COATS OF RAL 5019 HIGH
- PERFORMANCE ALKYD ENAMEL.
- TRANSFORMER DESIGN:
- TRANSFORMER:
- - DOUBLE WOUND TRANSFORMER TO BS EN 60076 IN A FULLY WELDED STEEL ENCLOSURE TO
- IP65 WITH BOLTED LID FOR ACCESS TO COMPONENTS.
- - TERMINALS: INCOMING AC AND OUTGOING DC TERMINALS ARE LOCATED IN THE TERMINAL
- CHAMBER ON THE FRONT OF THE TANK. TAPS ARE LOCATED INSIDE CHAMBER TO CHANGE
- OUTGOING DC VOLTAGE BY+5%.
- - RECTIFIER: SILICON DIODE FULL WAVE BRIDGE CONNECTED RECTIFIER STACK MOUNTED
- ON ANALUMINUM HEAT SINK TO BS4417 ABCD.
- - PROTECTION: DIODE PROTECTION WITH FAST ACTING SEMI-CONDUCTOR FUSES. SURGE
- SUPPRESSION FITTED TO PROTECT DIODES AGAINST SURGES FROM MAGNET COIL UPON
- SWITCH OFF.
- - FINISH: EPOXY POWDER COATED GREY FINISH
- - AES ELECTRICAL SWITCHGEAR WITH MASM RECTIFIER PANEL
- - 24X24 ENCLOSURE AND PANEL
- - INSTALLED TO A PANEL STAND
- - 40 AMP MAIN BREAKER WITH EXTERNAL DISCONNECT
- - MAGNET RECTIFIER
- - 25 AMPCIRCUIT BREAKER
- - NEMA / IEC RATED SIZE 2 MOTOR STARTER
- - NO OVERLOAD NEEDED
- - CONTROL BUTTONS IN DOOR
- - GREEN PILOT LIGHT FOR DC ON
- - MAGNET BELT - APPROXIMATLY 4 HP
- - 15 AMP CIRCUIT BREAKER
- - NEMA/ IEC RATED SIZE O MOTOR STARTER
- - CONTROL BUTTONS IN DOOR
- - MOTOR LEAD CORD AND MAIN POWER CORDS