Photo Count: 5-
Price:
$392,500 USD -
Location:
Fargo, North Dakota - (800) 437-2924
Interested in this machine? Send us a message
PriceWatch
Subscribe to be notified of price changes on this item.
2021 Other Screening Plant 7203-38OF
Fields with asterisks * are required.
Print This Page
Description
SCREEN PLANT W/ OVERHEAD FEED CONVEYOR
Inventory ID
E00069691
Serial
P-7-20-3-566-21
Machine Location
Details
- Inventory ID: E00069691
- Status: On Yard
- Make: Other
- Model: 7203-38OF
- Year: 2021
- Serial#: P-7-20-3-566-21
Notes
- PORTABLE 7›¼À™ X 20›¼À™ 3 DECK SCREEN PLANT WITH (3) CROSS CONVEYORS AND 42" FEED CONVEYOR EQUIPPED PER THE BELOW:
- - 7›¼À™ X 20›¼À™ - 3 JCI DECK SCREEN 50 HP 1200 RPM TEFC
- COIL SPRINGS
- 4FT PANELS
- SIDE TENSIONED BOTTOM DECK
- JCI BASE FRAME - 3 AXLE CARRIER:
- 18" WF BEAM 60#
- HUTCH 61" SPAN EQUALIZING SUSPENSION
- 22 500# STANDARD FORGE AXLES 11:00R X 22.5 TIRES
- AIR BRAKES LED BRAKE LIGHTS LED MARKER LIGHTS LED STROBE LIGHT REFLECTOR
- APE AND MUD FLAPS - 60" X 29- UNDER SCREEN CONVEYOR; 20 HP TEFC:
- 42" SPACING ON CEMA C IDLERS
- SEW RIGHT ANGLE DRIVE TYPE ›¼ÀœE›¼À BEARINGS
- VULCANIZED LAGGED HEAD PULLEY SELF-CLEANING WING TAIL PULLEY
- 3 PLY BELT 3/16 X 1/16 COVER
-VULCANIZED SPLICE
- SUPERIOR EXTERRA BELT SCRAPER
- 1/4" PLATE UNDER SCREEN HOPPER WITH WEAR STRIPS & ADJUSTABLE SKIRT BOARD
WIPERS.
- HEAVY DUTY 12" WF SUPPORT STAND UNDER SCREEN - (2) 30" X 12- CROSS CONVEYORS FOR 1ST & 2ND DECK.(1) 24" X 12›¼À™ FOR 3RD DECK:
- 7.5 HP TEFC MOTORS WITH SEW RIGHT ANGLE DRIVES
- CHANNEL INSET IDLERS
- VULCANIZED LAGGED HEAD PULLEY AND SELF CLEANING WING TAIL PULLEY
- DODGE SCM BEARINGS
- 2 PLY 3/16" COVER BELT 3 PLY ON 1ST DECKCONVEYOR
- VULCANIZED SPLICES
- SELF CLOSING SAFETY GATE AT LADDER OPENING - 42" FEED CONVEYOR WITH OPTIONAL ADJUSTABLE FEED HEIGHT; 20 HP:
- SEW RIGHT ANGLE DRIVE
- CLOSE SETTING IMPACT IDLERS IN FEED AREA THEN 36" C/C FOR CEMA C CIT IDLERS
- DODGE SCM BEARINGS
- 3 PLY BELT WITH 1/4›¼À COVER
- VULCANIZED LAGGED HEAD PULLEY AND SELF-CLEANING WING TAIL PULLEY
- 5- RECEIVING HOPPER WITH ADJUSTABLE WIPERS & FULL-LENGTH SKIRT BOARD
- PPI IMPACT SYSTEM IN LIEU OF IMACT IDLERS IN LOAD ZONE
- VULCANIZED SPLICE
- AR LINED PRODUCTS DISCHARGE CHUTES
- 20" FOLD DOWN WALK WAYS BOTH SIDES OF SCREEN
- 48" BACK PLATFORM TOE BOARDS 42" TUBESTEEL HANDRAILS AND ACCESS LADDER
- SAFETY GUARDS SANDBLASTED CHASSIS RUST INHIBITOR PRIMER AND TWO FINISH
COATS OF PAINT INCLUDED. - INCLUDED OPTIONS:
- FAB TEC PLANT MOUNTED 48K RUN-ON SYSTEM
- 5 X 24" CYLINDERS 48 000 LB. CAPACITY (AT 2500 PSI) WITH SAFETY-LOK CIRCUIT
- DELTA HPX-200 12-VOLTPOWER UNIT
- (1) SPOOL VALVE~ NUMBER OF BANKS TO MATCH LEG QUANTITY
- CYLINDER MOUNTING PLATES & HARDWARE
- HEAVY DUTY FOOT PADS - SELF CONTAINED HONDA 8 HP HYD. POWER PACKAGE ~VS~ HPX 200 12V:
- ELECTRIC START
- 12 GALLON HYDRAULIC RESERVOIR WITH FILTER PROTECTION
- 2 1/2 GPM PUMP - HYDRAULIC LIFT AT HEAD END OF FEED CONVEYOR:
- TO LIFT CONVEYOR FOR SCREEN CLOTH INSTALLATION & MAINTENANCE - HYDRAULIC LIFT AT TAIL END OF FEED CONVEYOR:
- PIN LOCATIONS AT DIFFERENTLEVELS - - 1/3 ›¼À“ 2/3 PANEL STYLE BLENDING
- 1ST TO 2ND AND 2ND TO 3RD DECK
- VULCANIZE SPLICE ON ALL CONVEYORS
- 42›¼À SUPERIOR EXTERRA BELT SCRAPER ~VS~ STANDARD COMBI-WIPE
- 60›¼À SUPERIOR EXTERRA BELT SCRAPER ~VS~ STANDARD COMBI-WIPE
- SEW KA77 7.5 HP RIGHT ANGLE DRIVE ~VS~ CONVENTIONAL DRIVES ON ALL CROSS
CONVEYORS
- INCLUDES TYPE ›¼ÀœE›¼À BEARINGS ON HEAD PULLEY
- SEW KA97 20 HP RIGHT ANGLE DRIVE ~VS~ CONVENTIONAL DRIVE
- INCLUDES TYPE ›¼ÀœE›¼À BEARINGS ON HEAD PULLEY
- TOOL BOX MOUNTED ON CHASSIS
- RUBBER DISC RETURNS ~VS~ STEEL CANS ON ALL CONVEYORS - PROVISION FOR SLIDE-IN REJECT CONVEYOR:
- SIMPLY FLAT BAR STYLE
- CONVEYOR NOT INCLUDED
- TIE OFF CABLES INSTALLED ON BOTH ENDSOF SCREEN SUBFRAME
- FAB TEC IS NOT RESPONSIBLE IF TIE OFFS DON›¼À™T MEET MSHA CODE
- ORANGE GUM RUBBER FLASHING ON ALL CONVEYORS
- 3 PLY BELT ON UNDERSCREEN CONVEYOR.
- PROVISION FOR SLIDE IN REJECT CONVEYOR - - GUARDING - WE DO NOTWARRANT THAT MANUFACTURERS›¼À™ GUARDING WILL MEET ALL LOCAL
CODES. IT IS THE RESPONSIBILITY OF THE END USER TO HAVE GUARDING CHECKED BY A
LOCAL INSPECTOR PRIOR TO STARTUP OF EQUIPMENT OPERATIONS CORRECTIVE ACTIONS
AND ASSOCIATED EXPENSE ARE THE RESPONSIBILITY OF THE END USER.