Photo Count: 12-
Price:
$1,200,000 USD -
Location:
Fargo, North Dakota - (800) 437-2924
Interested in this machine? Send us a message
PriceWatch
Subscribe to be notified of price changes on this item.
2022 Other Crusher - Impact I-140RS
Fields with asterisks * are required.
Print This Page
Description
TRACKED IMPACT CRUSHER
Inventory ID
E00060943
Serial
TRX140RSTOMN37718
Machine Location
Details
- Inventory ID: E00060943
- Status: On Yard
- Make: Other
- Model: I-140RS
- Year: 2022
- Serial#: TRX140RSTOMN37718
Notes
- NEW RENTAL FINLAY I-140RS TRACKED IMPACTOR PLANT EQUIPPED PER THE BELOW:
- ENGINE:
- TIER 4 FINAL: SCANIA DC13 368KW (500HP) ENGINE - IMPACT CHAMBER:
- TEREX CR032 IMPACT CHAMBER
- FULLY HYDRAULICALLY ASSISTED APRON SETTING AND HYDRAULIC APRON RELEASE
- MANUAL RAISE CHAMBER FLAP ALLOWING EXTRA INLET CLEARANCE
- 4 BAR ROTOR - TOOL STEEL BLOW BARS 2 HIGH & 2 LOW
- DIRECT DRIVE VIA CLUTCH
- DRIVE BELT TENSIONER WHEEL
- BLOW BAR LIFTING TOOL SUPPLIED
- TIP SPEED RANGE35-44 M/SEC (115-144FT./SEC)
- SMALLER DRIVE PULLEY FITTED TO GIVE A ROTOR TIP SPEED RANGE OF 31-39M/SEC
(102-128FT./SEC) STANDARD LARGE PULLEY STILL DISPATCHED WITH MACHINE
- HYDRAULIC RAISE OF CHAMBER INLET FLAP
- ROTOR FITTE WITH (2) FULL MATENSITIC CERAMIC & 2 LOW MARTENSITIC BLOW BARS - HOPPER & FEEDER:
- VGF FIXED HOPPER
- STEPPED GRIZZLY FEEDER WITH INTEGRAL PRE-SCREEN STANDARD 50MM SPACING
- MESH APERTURE ON GRIZZLY FEEDER: 38MM (1.50")
- SELECTABLE DISCHARGE TO BY-PASS CONVEYOR OR MAIN CONVEYOR
- BLANKING MAT FOR VGF
- PRE-SCREEN TOP DECK FITTED WITH SIDE TENSIONED MESH 30MM APERTURE STANDARD
- INDEPENDENT PRE-SCREEN C/W HYDRAULICALLY FOLDING AND LOCKING HOPPER AND
BLANKING MAT 50MMCASSETTE SPACING * 38MM MESH AS STANDARD
- INDPENDENT PRE-SCREEN HOPPER EXTENSIONS
- PRE-SCREEN PUNCH PLATE OPTIONAL SPACING - 25MM/50MM/75MM - NEED TO SPECIFY - MAIN CONVEYOR:
- 1300MM (51") BELT FULL LENGTH
- PIPED FOR OVERBAND MAGNET
- HYDRAULIC RAISE/LOWER FOR MAGNET
- UNDER CRUSHER VIBRATORY FEEDER WITH WEAR RESISTANT STEEL LINERS (C/W SHORTENED
MAIN CONVEYOR) - AUXILARY:
- BYPASS CONVEYOR WITH 80MM WIDE PLAIN BELT DISCHARGING TO THE RHS OF THE
MACHINE
- TWIN POLE OVERBAN MAGNET C/W STAINLESS STEEL SKIRTING & STAINLESS STEEL
DISCHARGE CHUTE DISCHARGING RHS OF THE MACHINE - RS COMPONENTS:
- 4.88M X 1.52M (16- X 5-) SINGLE DECK AFTER SCREEN C/W 40MM MESH AS STANDARD
UNLESS OTHERWISE STATED
- 500MM (20") WIDE BELT TRANSFER CONVEYOR
- 500MM (20") WIDE BELT HYDRAULIC FOLDING RE-CIRCULATING CONVEYOR ABLE TO SLEW
FOR STOCKPILING OVERSIZE MATERIAL
- 1400MM (55") WIDE BELT FINES CONVEYOR
- RAPID DETACH AFTER SCREEN SYSTEM FOR FLEXIBILITY
- BELT WEIGHER BELT SCALE - CLIMCATE SPEC:
- STANDARD OILS (RECOMMENDED FOR AMBIENT TEMPERATURES BETWEE -5 TO +30 DEG. C - DUST SUPPRESSION:
- PIPED FOR DUST SUPPRESSION C/W SPRAY BARS
- WATER PUMP NOT INCLUDED - ELECTRICAL:
- EMERGENCY STOPS
- HAND HELD TRACK CONTROL SET WITH CONNECTION LEAD
- RADIO REMOTE SYSTEM: OPERATIONAL CONTROLS OF MACHIN (AUTO START/STOP) & TRACK
MOVEMENT
- PRESSURISED AIR SYSTEM FOR ELECTRICAL CONTROL CABINET - GENERAL:
- SAFETY GUARDS IN COMPLIANCE WITH MACHINERY DIRECTIVE
- AUXILIARY DRIVE