2019 Finlay I-120RS Crusher - Impact For Sale » General Equipment & Supplies, Inc.

2019 Finlay I-120RS Crusher - Impact For Sale

  • Description
  • TRACKED IMPACT CRUSHER
  • Hours
  • 702
  • Inventory ID
  • E00056129
  • Serial
  • TRX120RSLOML11882
(800) 437-2924
General Equipment & Supplies, Inc.

Equipment is on rent
Contact your Salesperson for more information

Details

  • Inventory ID: E00056129
  • Status: On Rent
  • Make: Finlay
  • Model: I-120RS
  • Year: 2019
  • Serial#: TRX120RSLOML11882

Equipment Text

  • FINLAY I-120RS EQUIPPED AS PER BELOW:
  • ENGINE
    - TIER 4 FINAL /STAGE IV : SCANIA DC9 257KW (350 HP) ENGINE
  • IMPACT
    - TEREX CR038 IMPACT CHAMBER
  • CHAMBER:
    - FULLY HYDRAULICALLY ASSISTED APRON SETTING AND HYDRAULIC APRON RELEASE
    - MANUAL RAISE CHAMBER FLAP ALLOWING EXTRA INLET CLEARANCE
    - 4 BAR ROTOR - MARTENSITIC BLOW BARS 2 HIGH & 2 LOW
    - DIRECT DRIVE VIA CLUTCH
    - DRIVE BELT TENSIONER WHEEL
    - BLOW BAR LIFTING TOOL SUPPLIED.
    - SMALLER ENGINE CHAMBER DRIVE PULLEYTO GIVE A ROTOR LOWER SPEED RANGE. STANDARD LARGE PULLEY STILL DISPATCHED WITH MACHINE
    - ROTOR FITTED WITH 2 FULL MARTENSITIC CERAMIC & 2 LOW MARTENSITIC
    BLOW BARS
  • HOPPER & FEEDER:
    - VGF FIXED HOPPER
    - STEPPED GRIZZLY FEEDER WITH INTEGRAL PRE-SCREEN STANDARD 50MM SPACING
    - MESH APERTURE ON GRIZZLY FEEDER: 38MM
    - SELECTABLE DISCHARGE TO BY-PASS CONVEYOR OR MAIN CONVEYOR
    - BLANKING MAT FOR VGF
    - INDEPENDENT PRE-SCREEN C/W HYDRAULICALLY FOLDING AND LOCKING
    HOPPERAND BLANKING MAT. 2" SQUARE OPENING SCREENS INSTALLED BLANKING MAT
    INSTALLED
    - INDEPENDENT PRE-SCREEN HOPPER EXTENSIONS
    - BOFOR BARS REMOVED IN THE INDEPENDENT PRE-SCREEN
  • MAIN CONVEYOR:
    - 1100MM (43.3") BELT FULL LENGTH
    - UNDER CRUSHER VIBRATORY FEEDER WITH WEAR RESISTANT STEEL LINERS (C/W SHORTENED
    MAIN CONVEYOR)
  • AUXILIARY CONVEYORS:
    - HYDRAULIC RAISE/ LOWER FOR MAGNET
    - PIPED FOR OVER BAND MAGNET
    - BYPASS CONVEYOR WITH 650MM WIDE PLAIN BELT DISCHARGING TO THE LHS OF THE
    MACHINE.
    - TWIN POLE OVER BAND MAGNET C/W STAINLESS STEEL SKIRTING & STAINLESS STEEL
    DISCHARGE CHUTE DISCHARGING TO RHS OF THE MACHINE.
  • RS COMPONENTS:
    - 3.66M X 1.52M (12- X 5-) TWO DECK AFTER SCREEN C/W50MM TOP DECK AND 40MM
    BOTTOM DECK MESH AS STANDARD UNLESS OTHERWISE STATED
    - 500MM (20") WIDE BELT SINGLE TRANSFER CONVEYOR COLLECTING MATERIAL FROM BOTH
    DECKS.
    - 500MM (20") WIDE BELT HYDRAULIC FOLDING RE-CIRCULATING CONVEYOR ABLE TO SLEW
    FOR STOCKPILING OVERSIZE MATERIAL
    - 1400MM (55") WIDE BELT FINES CONVEYOR
    - RAPID DETACH AFTER SCREEN SYSTEM FOR FLEXIBILITY.
    - BELT WEIGHER
    - ADDITIONAL TRANSFER CONVEYOR FOR COLLECTING MATERIAL FROM EACH INDIVIDUAL DECK
    OF SCREEN BOX
  • CLIMATE SPEC:
    - STANDARD OILS - (RECOMMENDED FOR AMBIENT TEMPERATURES BETWEEN -5 TO +30›¼°C)
  • DUST SUPPRESSION:
    - PIPED FOR DUST SUPPRESSION C/W SPRAY BARS
    - WATER PUMP FOR DUST SUPPRESSION
  • ELECTRICAL:
    - EMERGENCY STOPS
    - HAND HELD TRACK CONTROL SET WITH CONNECTION LEAD
    - T-LINK TELEMETRY SYSTEM FITTED C/W 3 YEARS DATA SUBSCRIPTION
    - RADIO REMOTE SYSTEM: OPERATIONAL CONTROLS OF MACHINE (AUTO START/STOP) & TRACK
    MOVEMENT
    - PRESSURIZED AIR SYSTEM FOR ELECTRICAL CONTROL CABINET
    - LIGHTNING MAST
  • SAFETY GUARDS IN COMPLIANCE WITH MACHINERY DIRECTIVE

INTERESTED IN THIS MACHINE? SEND US A MESSAGE

Fields with asterisks * are required

Send to a Friend

Fields with asterisks * are required