2023 Finlay I-120RS Crusher - Impact For Sale Stock E00064054

Interested in this machine? Send us a message

Fields with asterisks * are required

PriceWatch

Subscribe to be notified of price changes on this item.

2023 Finlay Crusher - Impact I-120RS

Fields with asterisks * are required.
Print This Page
Description
IMPACT CRUSHER
Inventory ID
E00064054
Serial
TRX120RSCOMNC0465
  • Email a friend

    Send to a Friend

    Fields with asterisks * are required
  • Loan Calculator

    Loan Calculator

    Use the Loan Calculator to help you determine the financing and payment options that are best for you.

    Amount Financed ($)
    Interest Rate (%)
    Loan Term in Months
    Monthly Payment Calculated

    **The accuracy of this calculator and its applicability to your circumstances is not guaranteed. You should obtain personal advice from qualified professionals. This information is provided for illustrative purposes only and does not constitute an application. This notice does not guarantee loan approval, nor is it an offer or commitment to make a loan to you on the above terms.

Details

  • Inventory ID: E00064054
  • Status: On Yard
  • Make: Finlay
  • Model: I-120RS
  • Year: 2023
  • Serial#: TRX120RSCOMNC0465

Notes

  • NEW RENTAL FINLAY I-120RS TRACKED IMPACTOR PLANT EQUIPPED AS PER BELOW:
  • ENGINE:
    - TIER 4 FINAL/STAGE IV: SCANIA DC9 257 KW (350 HP) ENGINE
    IMPACT CHAMBER:
    - TEREX CR028 IMPACT CHAMBER
    - FULLY HYDRAULICALLY ASSISTED APRON SETTING ANDHYDRAULIC APRON RELEASE
    - MANUAL RAISE CHAMBER FLAP ALLOWING EXTRA INLET CLEARANCE
    - 4 BAR ROTOR - MARTENSITIC CERAMIC BLOW BARS 2 HIGH AND 2 LOW
    - DIRECT DRIVE VIA CLUTCH
    - DRIVE BELT TENSIONER WHEEL
    - BLOW BAR LIFTING TOOL SUPPLIED
    - DRIVE PULLEY TO SUIT HIGHER SPEED RANGE
    - SMALLER ENGINE CHAMBER DRIVE PULLEY FITTED TO GIVE LOWER SPEED RANGE. STANDARD
    LARGE PULLEY STILL DISPATCHED WITH THE MACHINE
  • HOPPER & FEEDER:
    - VGF FIXED HOPPER
    - STEPPED GRIZZLY FEEDERWITH INTEGRAL PRE-SCREEN STANDARD 50MM SPACING
    - MESH APERTURE ON GRIZZLY FEEDER: 38MM
    - SELECTABLE DISCHARGE TO BY-PASS CONVEYOR OR MAIN CONVEYOR
    - BLANKING MAT FOR VGF
    INDEPENDENT PRE-SCREEN:
    - INDEPENDENT PRE-SCREEN C/W HYDRAULICALLY FOLDING AND LOCKING HOPPER AND
    BLANKING MATT. 50MM CASSETTE SPACING & 38MM MESH AS STANDARD - MESH APERTURES
    AVAILABLE UPON REQUEST
    - INDEPENDENT PRE-SCREEN HOPPER EXTENSIONS
    - PRE-SCREEN PUNCH PLATE OPTIONAL SPACING 63MM
  • MAIN CONVEYOR:
    - 1100MM (43.3") BELT FULL LENGTH
    - UNDER CRUSHER VIBRATORY FEEDER WITH WEAR RESISTANT STAINLESS STEEL LINERS (C/W SHORTENED MAIN CONVEYOR)
    AUXILIARY:
    - HYDRAULIC RAISE/LOWER FOR MAGNET
    CONVEYORS:
    - PIPED FOR OVER BANDMAGNET
    - BYPASS CONVEYOR WITH 650MM WIDE PLAIN BELT DISCHARGING TO THE RHS OF THE
    MACHINE
    - TWIN POLE OVER BAND MAGNET C/W STAINLESS STEEL SKIRTING & STAINLESS STEEL
    DISCHARGE CHUTE DISCHARGING TO RHS OF THE MACHINE
    RS COMPONENTS:
    - 3.663 X 1.52M (5- X 12" 2-DECK SCREEN)- CLOTH NOT INCLUDED
    - 500MM (20") WIDE BELT SINGLE TRANSFER CONVEYOR COLLECTING MATERIAL FROM BOTH
    DECKS
    - 500MM (20") WIDE BELT HYDRAULIC FOLDING RE-CIRCULATING CONVEYOR ABLE TO SLEW
    FOR STOCKPILING OVERSIZE MATERIAL
    - 1400MM (55") WIDE BELT FINES CONVEYOR
    - RAPID DETACH AFTER SCREEN SYSTEM FOR FLEXIBILITY
    - BELT WEIGHER BELT SCALE INSTALLED
    - ADDITIONAL TRANSFER & STOCKPILE CONVEYOR FOR COLLECTING MATERIAL FROM EACH
    INDIVIDUAL DECK OF SCREEN BOX GIVING MIDDLE GRADE PRODUCT
    CLIMATE SPEC:
    - STANDARD OILS (RECOMMENDED FOR AMBIENT TEMPERATURES BETWEEN -5 TO +30 DEG. C)
    DUST SUPPRESSION:
    - PIPED FOR DUST SUPPRESSION C/W SPRAY BARS
    ELECTRICAL:
    -EMERGENCY STOPS
    - HAND HELD TRACK CONTROL SET WITH CONNECTION LEAD
    - T-LINK TELEMETRY SYSTEM FITTED C/W 7 YEAR DATA SUBSCRIPTION
    - RADIO REMOTE SYSTEM: OPERATIONAL CONTROLS OF MACHINE (AUTO START/STOP) & TRACK
    MOVEMENT
    - PRESSURIZED AIR SYSTEM FOR ELECTRICAL CONTROL CABINET
    GUARDING:
    - GUARDING: FOR DRIVE AND TAIL PULLEYS GUARDS MAY NOT MEET ALL LOCAL CODES;
    CUSTOMER IS RESPONSIBLE TO HAVE GUARDING INSPECTED.