2017 Superior 6203-32OF Screening Plant For Sale Stock E00065122

Interested in this machine? Send us a message

Fields with asterisks * are required

PriceWatch

Subscribe to be notified of price changes on this item.

2017 Superior Screening Plant 6203-32OF

Fields with asterisks * are required.
Print This Page
Description
SCREEN PLANT W/ OVERHEAD FEED CONVEYOR
Inventory ID
E00065122
Serial
1078601
  • Email a friend

    Send to a Friend

    Fields with asterisks * are required
  • Loan Calculator

    Loan Calculator

    Use the Loan Calculator to help you determine the financing and payment options that are best for you.

    Amount Financed ($)
    Interest Rate (%)
    Loan Term in Months
    Monthly Payment Calculated

    **The accuracy of this calculator and its applicability to your circumstances is not guaranteed. You should obtain personal advice from qualified professionals. This information is provided for illustrative purposes only and does not constitute an application. This notice does not guarantee loan approval, nor is it an offer or commitment to make a loan to you on the above terms.

Details

  • Inventory ID: E00065122
  • Status: On Yard
  • Make: Superior
  • Model: 6203-32OF
  • Year: 2017
  • Serial#: 1078601

Notes

  • USED SUPERIOR 6203-32OF OVERHEAD FEED SCREEN PLANT EQUIPPED AS PER BELOW:
  • CARRIER CHASSIS:
    - MAIN FRAME CONSTRUCTED OF WIDE FLANGE STRUCTURAL STEEL BEAMS
    - TANDEM AXLE WITH (8) 11X22.5 RADIAL TIRES
    - COMPLETE AIR BRAKE SYSTEM
    - MUDFLAPS ON REAR AXLE
    - TRAVEL LIGHTS WITH BRAKE AND DIRECTIONAL SIGNALS
    - FIFTH WHEEL HITCH
    - 1-2 GREASE POINTS FOR GREASING THE PLANT
    - (8) FIXED STRUCTURAL CRIBBING LEGS
    SUPERIOR 6203-32 HORIZONTAL (FLAT) SCREEN:
    - RIGHT HAND DRIVE COIL SPRINGS BASEFRAME 5- PANELS END TENSION
    BOTTOM DECK
    - 40 HP TEFC 1200 RPM 480 VOLT 3 PHASE 60 HZ SCREEN DRIVE MOTOR
    - ADJUSTABLE MOTOR MOUNT MOTOR AND SCREEN DRIVE SHEAVE V-BELT
    DRIVE AND DRIVE GUARD
    SCREEN DISCHARGECHUTES:
    - CHUTES ARE IN FIXED POSITION
    - CONSTRUCTED OF 1/4" MILD STEEL WITH 1/4" AR400 STEEL LINER
    - TOP DECK CHUTE DISCHARGES ONTO TOP OR MIDDLE DECK CROSS CONVEYOR
    - (4) FLOP GATES
    - MIDDLE DECK CHUTE DISCHARGES ONTO MIDDLE OR BOTTOM DECK CROSS
    CONVEYOR
    - (4) FLOP GATES
    - BOTTOM DECK CHUTES DISCHARGE ONTO CROSS CONVEYOR
    FINES HOPPER:
    - 1/4" AR CONSTRUCTION
    - FULL LENGTH RUBBER ADJUSTABLE FLASHING
    (1) 42" SCREEN FEED CONVEYOR:
    - STRUCTURAL STEEL CHANNEL MAINFRAME
    - ROCK BOX HOPPER RECEIVES FEED MATERIAL FOR SCREEN
    - ADJUSTABLE RUBBER FULL LENGTH OF ROCK BOX HOPPER
    - FULL LENGTH STEEL SKIRTING (NO FLASHING PAST HOPPER)
    - CLASS II HEAD END DRIVE
    - 25 HP MOTOR V-BELT DRIVE WITH DRIVE GUARD
    - DODGE SHAFT MOUNT REDUCER
    - HEAD PULLEY: 14" DIAMETER DRUM CROWN FACE 3/8" DIAMOND LAGGING
    - TAIL PULLEY: 14" DIAMETER WING PULLEY
    - SHAFTS TURNED AND POLISHED
    - DODGE BEARINGS
    - MANUAL SCREW TAKE-UPS
    - C5 IMPACT IDLERS IN LOADZONE
    - CARRY IDLERS: C5 20 DEGREE TROUGH CHANNEL MOUNT SPACED 26" ON
    CENTER
    - BELTING 3 PLY 1/4" X 1/16" 330 PIW
    - VULCANIZED BELT SPLICE
    - HYDRAULIC CYLINDERS RAISE CONVEYOR FROM TRAVEL TO OPERATING
    POSITION
    - EXTERRA PRIMARY BELT CLEANER
    (3) 30" WIDE X 11- LONG REVERSING CROSS CONVEYORS:
    - STRUCTURAL STEEL CHANNEL MAIN FRAME
    - MOUNTED ON ROLLERS TO MANUALLY MOVE TO DISCHARGE FROM EITHER
    SIDE OF CHASSIS
    - RECEIVE OVERSIZE MATERIAL FROM RESPECTIVE MIDDLE AND BOTTOM
    DECKS
    - CLASS II HEAD END
    - 7.5 HP MOTOR V-BELT DRIVE WITH DRIVE GUARD
    - DODGE SHAFT MOUNT REDUCER
    - HEAD PULLEY: 10" DIAMETER DRUM CROWN FACE 3/8" DIAMOND LAGGING
    - TAIL PULLEY: 10" DIAMETER WING PULLEY
    - SHAFTS TURNED AND POLISHED
    - DODGE BEARINGS
    - MANUAL SCREW TAKE-UPS
    - CARRY IDLERS: C5 20 DEGREES TROUGH CHANNEL MOUNT SPACED 26" ON
    CENTER
    - BELTING 3-PLY 3/16" X 1/16" 440 PIW
    - VULCANIZED BELT SPLICE
    - EXTERRA PRIMARY BELT CLEANER
    (1) 60" FINES CONVEYOR:
    - STRUCTURAL STEEL CHANNEL MAIN FRAME 6- DISCHARGE HEIGHT
    - CLASS II HEAD END DRIVE
    - 15 HP MOTOR V-BELT DRIVE
    - DODGE SHAFT MOUNT REDUCER
    - HEAD PULLEY: 12" DIAMETER DRUM CROWN FACE 3/8" HERRINGBONE
    LAGGING
    - TAIL PULLEY: 12" DIAMETER CHEVRON WING PULLEY
    - SHAFTS TURNED AND POLISHED
    - DODGE BEARINGS
    - MANUAL SCREW TAKE-UPS
    - CARRY IDLERS: C5 20 DEGREES PICKING CHANNEL MOUNT SPACED
    APPROXIMATELY 27" ON CENTER
    - RETURN IDLERS: C45 FLAT ROLLS SPACED 10- ON CENTER
    - BELTING 3-PLY 3/16" X 1/16" 440 PIW
    - VULCANIZED BELT SPLICE
    - EXTERRA PRIMARY BELT CLEANER
    HYDRAULIC RUN-ON LEVELING JACKS:
    - (4) 6" X 18" HYDRAULIC CYLINDERS WITH HYDRAULIC LOCK (COUNTER
    BALANCE VALVES BUILT INTO CYLINDER HEADS)
    - (4) MANUAL LEVER VALVES; (1) FOR EACH CYLINDER
    - 9 HP HONDA MOTOR GAS OVER HYDRAULIC ENCLOSED CABINET
    WALKWAYS:
    - 3/16" DIAMOND TREAD PLATE ALONG BOTH SIDES AND FEED END OF SCREEN
    WITHDRAIN HOLES
    - INCLUDES TOE BOARD AND TWO-RAIL HANDRAIL
    - WALKWAY ACCESS ON BOTH SIDES OF THE CHASSIS WITH (2) STEEP ANGLE
    STAIR ACCESS LADDERS
    PAINT:
    - (1) COAT PRIMER; (1) COAT ENAMEL; PAINTED GRAPHITE GRAY ( CARRIER
    AND SCREEN) HANDRAILS LADDERS AND GUARDING PAINTED ORANGE
    - GUARDING FOR DRIVE AND TAIL PULLEYS V-BELT DRIVE AND RETURN IDLERS.
    GUARDS MAY NOT MEET ALL LOCAL CODES; CUSTOMER IS RESPONSIBLE TO
    HAVE GUARDING INSPECTED.
  • ELECTRICAL ENCLOSURE WITH SHORT LEGS - WILL SET ON FRAME FOR TRAVEL - REMOVE TO OPERATE;
    - MAIN BREAKER
    - 50 HP SCREEN
    - 25 HP OVERHEAD FEED CONVEYOR
    - 20 HP UNDERSCREEN PRODUCT CONVEYOR
    - (3) 5 HP CROSS CONVEYOR
    - (1) SPARE 50 HP STARTER AND BREAKER- CUSTOMER TO SUPPLY AND
    INSTALL RECEPT.
    - (2) SPARE 20 HP STARTERS AND BREAKERS - CUSTOMER TO SUPPLY AND
    INSTALL RECEPT.
    - (1) 5 HP SPARE FOR FUTURE SLIDE IN REJECT CONVEYOR
    - 110 OUTLET ON PANEL SIDE
    - BUTTONS IN THE PANEL DOOR - UPPER LEFT CORNER
    - 100- OF MAIN POWER CORD
    - ALL MOTORS WIRED TO PANEL LOCATED ON LEFT REAR OF PLANT WITH
    ENOUGH CORD TO LOCATE PANEL 30- AWAY