2019 Canica CRV2000 Crusher - Impact For Sale » General Equipment & Supplies, Inc.

2019 Canica CRV2000 Crusher - Impact For Sale

  • Price
  • $447,500 USD
  • Description
  • IMPACTOR CRUSHING PLANT
  • Hours
  • 545.8
  • Inventory ID
  • E00055196
  • Serial
  • TRX2000VJOKKC1255
(800) 437-2924
Machine Location:
View Google Map
General Equipment & Supplies, Inc.
3901 N. Lewis Ave
Sioux Falls, South Dakota 57104

Details

  • Inventory ID: E00055196
  • Status: On Yard
  • Make: Canica
  • Model: CRV2000
  • Year: 2019
  • Serial#: TRX2000VJOKKC1255

Equipment Text

  • CANICA CRV2000 5 SHOE TABLE IMPACTOR CRUSHING PLANT EQUIPPED AS PER BELOW:
  • - TEREX CANICA 2000 VERTICAL SHAFT IMPACTOR WITH AUXILIARY
    ELECTRICAL CONTROL CABINET WITH RPM GUAGE VIBRATION DETECTOR
    (WARNING) LIGHT HOUR METER OPEN-LID CRUSHER SAFETY CUT-OFF 2 HP
    LUBE SYSTEM STARTER OIL SYSTEM HEATER STARTER AND 15 HP SPARE
    STARTER. CONTAINS TERMINATION POINTS FOR ALL SAFETY SHUT-OFF
    SWITCHES.
    - PANTENTED "HYDRALID" HYDRAULIC LID LIFTER & MODULAR OIL LUBE
    SYSTEM
    - 48" (1219MM) WIDE COVERED PRODUCT CONVEYOR AND HOOD WITH 15 HP (11
    KW) ELECTRIC MOTOR - SUPERSCREW BELT SPLICE
    - EXTERNALLY ADJUSTABLE FEED TUBE SYSTEM FEED HOPPER WITH BANG
    BOARD
    - SERVICE PLATFORMS AROUND CRUSHER WITH INCLINED ACCESS LADDER TO
    GROUND
    - EASY MAINTENANCE FEATURES; REMOTE GREASE LINES GROUND ACCESS
    CONE LUBRICATION MODULE
    - EMERGENCY STOP BUTTONS ON BOTH SIDES OF THE FRAME
    - TANDEM AXLE SPRING SUSPENSION WITH EIGHT (8) 295/75 R22.5 TIRES
    - 48" (1219MM) LONG LOCKABLE SIDE-MOUNTED STORAGE BOX
    - 2000 HEAVY DUTY SAND (HDS) VSI SINGLE DRIVE WITH OPEN TABLE AND
    ANVILS - UP TO 250 STPH FEED RATE AND UP TO 2" (25MM) FEED SIZE
    - 460 VOLT 3 PHASE 60 HERTZ
    - 300 HP 1200 RPM 460/60 HERTZ SINGLE DRIVE ELECTRIC MOTOR
    - SET OF FOUR (4) 6" X 24" STROKE DUAL PINNED HYDRAULIC RUN-ON JACKS
    AND GAS POWER
    - PAINTED GRAPHITE GRAY (RAL 7024) WITH SAFETY YELLOW HANDRAILS
    LADDERS AND GUARDING
    - AES ELECTRICAL SWITCHGEAR PANEL EQUIPPED AS PER BELOW:
    - 60X60 NEMA 3R/4 ENCLOSURE
    - DRIP SHIELD CORD CAGE
    - MANUALLY OPERATED SAFETY START UP ALARM
    - 800 AMP MAIN CIRCUIT BREAKER WITH LOCKABLE OPERATOR - ADJUSTED TO
    700 AMPS
    - IMPACTOR AMP METER AND HOUR METER
    - PLANT HZ METER
    - PLANT VOLT METER
    - ACS880 ABB BRAND VFD
    - POTENTIOMETER FOR SPEED CONTROL
    - 900 CFM HEAT EXCHANGER ON A SWITCH
    - CONTROL BUTTONS IN THE DOOR
    - 25 HP FEED CONVEYOR NEMA/IEC RATEDSIZE 2 STARTER - 60 AMP
    RECEPTACLE AND PLUG - INTERLOCKED
    - 20 HP SPARE 1 CONVEYOR - SIZE 2 STARTER - 60 AMP RECEPTACLE AND PLUG
    - 20 HP SPARE 2 CONVEYOR - SIZE 2 STARTER - 60 AMP RECEPTACLE AND PLUG
    - 20 HP SPARE 3 CONVEYOR - SIZE2 STARTER - 60 AMP RECEPTACLE AND PLUG
    - 5 KVA TRANSFORMER WITH (1) 120 VAC 20 AMP GFCI DUPLEX -
    WEATHERPROOF
    - 60 AMP FEED BREAKER FOR CANICA POWER PANEL
    - VIBRATION SWITCH AND WIRING
    - VIBRATION INDICATOR LIGHT
    - HOUR METER
    - RPM GUAGE
    - LUBE STARTER AND CONTROLS
    - UNDER CRUSHER STARTER AND CONTROLS
    - 100- OF POWER CORD CONSISTING OF (2) PARALLEL RUNS OF 4/0 TYPE W PER
    PHASE QTY. (1) 4/0 TYPE W GROUND
    - SG PANEL SETS OFF THE GROUND 30- FOR OPERATION
    - GUARDING - WE DO NOT WARRANT THAT OUR GUARDS WILL MEET ALL
    LOCAL CODES.IT IS THE RESPONSIBILITY OF THE END USER TO HAVE THEM
    CHECKED BY A LOCAL INSPECTOR
  • S/N# OF CANICA CRUSHER 2000188-19

INTERESTED IN THIS MACHINE? SEND US A MESSAGE

Fields with asterisks * are required

Send to a Friend

Fields with asterisks * are required