Photo Count: 12-
RENTAL PRICE:
Call for Price -
Location:
Sioux Falls, South Dakota - (800) 437-2924
Interested in this machine? Send us a message
PriceWatch
Subscribe to be notified of price changes on this item.
2022 Other Crusher - Impact I-140RS
Fields with asterisks * are required.
Print This Page
Description
TRACKED IMPACT CRUSHER
Inventory ID
E00060943
Serial
TRX140RSTOMN37718
Machine Status
Equipment is on rent
Contact your Salesperson for more information
Contact your Salesperson for more information
Details
- Inventory ID: E00060943
- Status: On Rent
- Make: Other
- Model: I-140RS
- Year: 2022
- Serial#: TRX140RSTOMN37718
Notes
- NEW RENTAL FINLAY I-140RS TRACKED IMPACTOR PLANT EQUIPPED PER THE BELOW:
- ENGINE:
- TIER 4 FINAL: SCANIA DC13 368KW (500HP) ENGINE - IMPACT CHAMBER:
- TEREX CR032 IMPACT CHAMBER
- FULLY HYDRAULICALLY ASSISTED APRON SETTING AND HYDRAULIC APRON RELEASE
- MANUAL RAISE CHAMBER FLAP ALLOWING EXTRA INLET CLEARANCE
- 4 BAR ROTOR - TOOL STEEL BLOW BARS 2 HIGH & 2 LOW
- DIRECT DRIVE VIA CLUTCH
- DRIVE BELT TENSIONER WHEEL
- BLOW BAR LIFTING TOOL SUPPLIED
- TIP SPEED RANGE35-44 M/SEC (115-144FT./SEC)
- SMALLER DRIVE PULLEY FITTED TO GIVE A ROTOR TIP SPEED RANGE OF 31-39M/SEC
(102-128FT./SEC) STANDARD LARGE PULLEY STILL DISPATCHED WITH MACHINE
- HYDRAULIC RAISE OF CHAMBER INLET FLAP
- ROTOR FITTE WITH (2) FULL MATENSITIC CERAMIC & 2 LOW MARTENSITIC BLOW BARS - HOPPER & FEEDER:
- VGF FIXED HOPPER
- STEPPED GRIZZLY FEEDER WITH INTEGRAL PRE-SCREEN STANDARD 50MM SPACING
- MESH APERTURE ON GRIZZLY FEEDER: 38MM (1.50")
- SELECTABLE DISCHARGE TO BY-PASS CONVEYOR OR MAIN CONVEYOR
- BLANKING MAT FOR VGF
- PRE-SCREEN TOP DECK FITTED WITH SIDE TENSIONED MESH 30MM APERTURE STANDARD
- INDEPENDENT PRE-SCREEN C/W HYDRAULICALLY FOLDING AND LOCKING HOPPER AND
BLANKING MAT 50MMCASSETTE SPACING * 38MM MESH AS STANDARD
- INDPENDENT PRE-SCREEN HOPPER EXTENSIONS
- PRE-SCREEN PUNCH PLATE OPTIONAL SPACING - 25MM/50MM/75MM - NEED TO SPECIFY - MAIN CONVEYOR:
- 1300MM (51") BELT FULL LENGTH
- PIPED FOR OVERBAND MAGNET
- HYDRAULIC RAISE/LOWER FOR MAGNET
- UNDER CRUSHER VIBRATORY FEEDER WITH WEAR RESISTANT STEEL LINERS (C/W SHORTENED
MAIN CONVEYOR) - AUXILARY:
- BYPASS CONVEYOR WITH 80MM WIDE PLAIN BELT DISCHARGING TO THE RHS OF THE
MACHINE
- TWIN POLE OVERBAN MAGNET C/W STAINLESS STEEL SKIRTING & STAINLESS STEEL
DISCHARGE CHUTE DISCHARGING RHS OF THE MACHINE - RS COMPONENTS:
- 4.88M X 1.52M (16- X 5-) SINGLE DECK AFTER SCREEN C/W 40MM MESH AS STANDARD
UNLESS OTHERWISE STATED
- 500MM (20") WIDE BELT TRANSFER CONVEYOR
- 500MM (20") WIDE BELT HYDRAULIC FOLDING RE-CIRCULATING CONVEYOR ABLE TO SLEW
FOR STOCKPILING OVERSIZE MATERIAL
- 1400MM (55") WIDE BELT FINES CONVEYOR
- RAPID DETACH AFTER SCREEN SYSTEM FOR FLEXIBILITY
- BELT WEIGHER BELT SCALE - CLIMCATE SPEC:
- STANDARD OILS (RECOMMENDED FOR AMBIENT TEMPERATURES BETWEE -5 TO +30 DEG. C - DUST SUPPRESSION:
- PIPED FOR DUST SUPPRESSION C/W SPRAY BARS
- WATER PUMP NOT INCLUDED - ELECTRICAL:
- EMERGENCY STOPS
- HAND HELD TRACK CONTROL SET WITH CONNECTION LEAD
- RADIO REMOTE SYSTEM: OPERATIONAL CONTROLS OF MACHIN (AUTO START/STOP) & TRACK
MOVEMENT
- PRESSURISED AIR SYSTEM FOR ELECTRICAL CONTROL CABINET - GENERAL:
- SAFETY GUARDS IN COMPLIANCE WITH MACHINERY DIRECTIVE
- AUXILIARY DRIVE